Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215 USA Voice: (617) 566-9300 Fax: (617) 249-1987 www.grandstream.com GRP2602 GRP2602P Carrier-Grade IP Phone For Certification, Warranty and RMA information, please visit www.grandstream.
Content English...............................................................................1 简体中文..........................................................................6 Español............................................................................11 Français...........................................................................16 Deutsch............................................................................21 Italiano......................................................................
EN The GRP2602/GRP2602P is not pre-configured to support or carry emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is Your responsibility to purchase SIP-compliant Internet telephone service, properly configure the GRP2602/ GRP2602P to use that service, and periodically test Your configuration to confirm that it works as You expect.
PHONE SETUP: Wall mount Slot for the wall mount spacers and phone stand CONNECTING THE PHONE: To setup the GRP2602/GRP2602P, follow the steps below: 1. Connect the handset and main phone case with the phone cord. LAN Port Handset Port Kensington Lock PC Port Power Phone Stand 2. Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into an electrical outlet. If PoE switch is used in step 3 (GRP2602P only), this step could be skipped. 3.
ZH GRP2602/GRP2602P不预设对医院,执法机构,医 疗中心(急救服务)以及各种紧急服务的紧急通话 服务。用户必须自行设定紧急通话功能。用户必 须自行购买SIP兼容的网络电话服务,正确地设定 GRP2602/GRP2602P使用该服务,并定期测试您的配 置以确保GRP2602/GRP2602P Configure the GRP2602/GRP2602P using the Keypad: 如预期工作,否则请 购买传统无线或有线电话服务来拨打紧急通话。 1. Make sure the phone is idle. 2. Press the MENU key to access the keypad MENU to configure the phone. 3. Select MENU → SETTINGS → ACCOUNT SETTINGS to configure settings for SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID and SIP Password. 4.
注意事项: 安装电话: 警告: 请不要在设备启动未完成或设备升级软件的过程中断开电源,因 为如刚才所述的操作会导致话机本身的程序损坏,进而导致设备无法启 墙体支架配件 墙体支架槽与桌 面支架槽 警告: 请使用设备包装中的电源,因为使用其他没有经过认证的替代电 源适配器有可能对设备造成损害。 网络连接端口 手柄插口 肯辛顿锁孔 PC端口 电源 产品概览: 耳机插口 GRP2602/GRP2602P是一款功能强大的电信级IP电话,支持2条线路, 采用零接触配置,可进行大规模部署和轻松管理。它具有时尚的设计和 一系列下一代功能,支持三方语音会议,听筒和扬声器均支持全高清音 频,支持Plantronics&Jabra&Sennheiser EHS耳机以及多语言,可最 大程度提高工作效率。GRP系列包含运营商级安全功能,可提供企业级 安全性,包括安全启动,双固件映像和数据存储加密。GRP2602/ GRP2602P支持使用Grandstream的设备管理系统(GDMS)来提供集 中式管理和云监控部署。GRP2602/GRP2602P专为桌面办公人员构 建,旨在为企业,服务提供商和其他大批量市场轻松部署
电话的连接: 请按以下步骤设置GRP2602/GRP2602P : 1. 用手柄连线连接电话手柄和电话主机; 2. 用5V电源适配器连接电话电源接口和交流电源插座。如果在第三步中使用了 PoE交换机,可忽略此步骤 (针对GRP2602P); 3. 用网线连接电话的网络接口和外部网络接口(如:集线器或交换机上的RJ-45 网络接口); 4. 电话屏幕将会显示Grandstream 图标 ;请耐心等待至主画面显示; 5. 话机启动后,用户可以在主菜单或WEB浏览器进一步设置静态IP,DHCP等其 他 配置,从而获得网络连接。 产品概览: 通过键盘配置GRP2602/GRP2602P: 1. 确保电话处于空闲状态; 软按键 线路键 信息指示灯 信息 静音 转移键 耳机键 导航键 菜单/确认键 2. 按下菜单/确认键进入菜单选项;. 3. 选择菜单→ 设置→ 账号,输入SIP服务器、SIP用户名、密码等账号信息,注册 新的SIP账号; 4.
ES El GRP2602/GRP2602P no esta pre-configurado para soportar o realizar llamadas de emergencia a ningún tipo de hospital, agencia policial, unidad de cuidado medico o cualquier otro servicio de emergencia. Es su responsabilidad contratar un servicio de telefonía de Internet compatible con el protocolo SIP, configurar el GRP2602/GRP2602P para utilizar dicho servicio y periódicamente probar esta configuración para confirmar que este trabajando como usted espera.
INSTALACIÓN DEL TELEFONO: Wall mount Ranuras para soporte y montura de pared CONECTANDO EL TELÉFONO: Para configurar el GRP2602/GRP2602P, siga los pasos detallados abajo: 1. Conecte el auricular a la unidad utilizando el cable telefónico. Puerto LAN Puerto Auricular Kensington Lock Puerto PC Alimentación Phone Stand 2. Conecte la fuente de poder de 5V DC a la salida de alimentación del teléfono y la salida de electricidad.
FR Configurando el GRP2602/GRP2602P usando el teclado: 1. Asegure que el teléfono se encuentre en reposo. 2. Presione la botón de MENU para acceder a el menu de teclado para configurar el teléfono. 3. Seleccione MENU→ Configuración→ Configuración de cuenta para configurar el SIP Proxy, Outbound Proxy, SIP User ID,SIP Auth ID, SIP Password.. 4. Siga las opciones de MENU para configurar las funciones básicas del teléfono por ejemplo: La Dirección IP, en caso de usar una dirección IP estática.