PORTABLE MICROPHONE CS-M008 KARAOKE SPEAKER WITH HOLDER The User Manual Thank you for choosing Portable Microphone CS-M008 Karaoke Speaker. Please read this manual before usage.
Technical Specification Name: Portable Wireless Microphone Bluetooth Speaker with holder Item NO.:CS-M008 Source Input: TF Card/USB/BT/ Flashing Light/LINE-OUT Input:DC5V;500mA Output Power:5W*1 Bluetooth version:V4.2 Wireless frequency:2404-2480MHz Product size:80*74*277mm Weight:407.
1. Play/pause button 2. Previous song 3. Mic volume +/-,slide switch 4. Echo+/-,slide switch 5. Music volume +/-,slide switch 6. Next song 7. LED lights on/off 8. Power on/off; mode: Bluetooth/TF card/USB reader 9. Phone holder 10. USB charging socket 11. TF card socket 12. Line-out socket 13. USB driver socket Charging Please make sure that the CS-M008 karaoke speaker is fully charged before first use. Connect the product with USB cable. The indicator will show red light when charging.
mode”. 2. You can search “ CS-M008 “to connect it on your device. Once connect successfully there will be sound indicate that “Connected”. 3. Enter ‘0000’ and click OK if there a prompt that requires you to enter a password. 4. Apply any karaoke APP or select song from your device music player, and adjust Mic Volume, Echo, to the right position. 4. You can sing along with Microphone. TF card mode 1.
Magic sound Turn on Microphone, double click this button to enter magic sound function,the microphone will release prompt sound to enter this function.then short press this different sound(it have four magic sound); Double click this button again wil change button again will exit magic sound function. Troubleshooting The power light is not ON Please check the USB cable and charge it. The microphone has no sound. Please turn power on and adjust the volume to big. The microphone has no echo.
on, the user is encouraged to try to correct the interference by one or more of the following mea sures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is c onnected. —Consult the dealer or an experienced radio/TV technician for help.