User's Manual

2M15 / 2M16
Product Features
Parent’s Unit
(PD115976)
Model 2M16 - 1 unit
Model 2M15 - 2 units
Power
Volume:
Up/Down
Clip
Green = batteries ok
Red = batteries low
DC Adapter Jack
with rubber cover
Channel
Selector
GRACO
R
Docking Station (A3921)
Model 2M16 -1 unit
Model 2M15 - 2 units
AC Adapter
Model 2M16 - Qty. 2
Model 2M15 - Qty. 3
Battery Cover
DC Adapter
Jack
Vibe
ON/OFF
Vibe setting
Green
when
charging
ON/OFF
Failure to follow these warnings and the assembly
instructions could result in serious injury or death.
This device is designed only to monitor the sounds of your child. It will not alert you to your child’s silent activities.
When using the monitor, you must still provide the supervision necessary for the continued safety of your child. This product
is not designed or intended for use as a medical monitor. Always be sure that both the transmitter and receiver are working
properly and are within range of each other.
• STRANGULATION HAZARD. Keep the adapter cords out of the reach of children. Do not use with extension cords.
• DO NOT place the Nursery Unit or its cord within your child’s reach. Do not put the Nursery Unit inside a crib or play yard.
• Use ONLY with 110-120 volt AC electrical outlets.
• Protect the AC adapter cords. Place them so they are not walked on or pinched by furniture or other items.
• Allow for proper ventilation when units are in use. Do not cover the Nursery Unit or Parent Units with any object such
as a blanket. Do not place it in a drawer or in any location which would muffle the sound or interfere with the normal flow of air.
• DO NOT immerse any part of the Nursery Unit, Parent Units, or docking station in water. Clean only with a dry cloth.
• DO NOT place unit near water and moisture. Do not use the Nursery Unit outdoors. Do not use the Nursery Unit near possible
wet areas, such as a bathtub, shower, wash basin, sink, laundry tub, swimming pool, wet basement, etc.
• Keep Nursery Unit away from heat sources, such as fireplaces, radiators, stoves, and TVs or other appliances. Heat can
damage the case or electrical parts.
• DO NOT use the Nursery Unit if:
• The adapter cords or plugs have been damaged.
• The unit has been exposed to liquids.
• Unit has been dropped or is damaged.
• DO NOT OPEN THE NURSERY UNIT, PARENT UNITS, DOCKING STATION OR ADAPTERS. No user-serviceable parts inside.
Risk of electrical shock, fire or death.
• The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm (7.9”) from all persons
and must not be co-located or operating in conjunction with any other antenna or transmitter.
Parent Unit
• The battery must be plugged into the Parent Unit before the
unit will be ready for use. Remove the battery door cover on the
Parent Unit with a key or flat blade screw driver. Remove the battery
pack from the packaging and plug into the back of the unit. Place
the battery pack into the recess and press the wire into the slot on
the side. Replace the battery door.
Nursery Unit
• Turn the unit over, and use screw driver to remove the battery door.
• Place 3-AAA (1.5V-LR03) batteries into the battery compartment. Note
the proper orientation of the batteries.
• Place the battery door back on the unit.
• Please remove a dead battery promptly. A dead battery left in the unit
may leak, damaging your unit.
• Do not attempt to recharge a non-rechargeable battery.
• A rechargeable battery CANNOT be recharged by plugging the AC
adapter into the Nursery Unit.
• Remove the batteries from the unit if it is no longer being used or will
be stored for an extended period of time.
• The Parent Unit(s) can use either the rechargeable battery that comes with the unit or standard 120 volt AC household
current. The Nursery Unit uses 3-AAA (1.5V-LR03) batteries or standard 120 volt AC household current.
• To use AC adapters, plug the connector on the cord into the AC adapter jack on the side of the Parent Unit (under the
rubber cover) and the back of the Nursery Unit. If using the docking station, plug the AC adapter jack into the back of the
docking station. The Parent Unit may now be placed in the docking station. Then plug adapter into a standard wall outlet.
• Use ONLY the Graco adapters included with the unit. Do not use these adapters with other equipment under any
circumstances.
• If units do not work, check that AC adapters are plugged into working outlets.
• When electricity is off (from a power failure, etc.), the Nursery Unit will operate on 3-AAA (1.5V-LR03) batteries. If the Power
LED is not lit, turn the power off and then back on to the Nursery Unit. A green LED indicates that the batteries are fine. A red
LED indicates that the batteries are low. If the LED does not light at all, then replace the batteries. The Parent Unit will operate
if the rechargeable battery is charged.
• In case you are experiencing some interference, the channel on the Nursery Unit can be changed by pressing the “ch”
button on the side of the unit. The Parent Unit will automatically scan all of the available channels until it locks on to the
Nursery Unit. If you are still experiencing interference, press the channel button on the side of the Nursery Unit up to 6
times until a good channel is found.
Replacement Parts

www.gracobaby.com
OR
1-800-345-4109
To register your Graco product from within
the U.S.A. visit us online at
www.gracobaby.com/productregistration.
We currently do not accept product registrations
from those living outside the
United States of America.
Product Registration (USA)
To purchase parts or accessories or for warranty information
in the United States, please contact us at the following:
Battery Installation
Using AC Adapters
Selecting Channels
1
2 3
©2009 Graco PD115512A 6/09
FCC Statement:
Modifications not authorized by the manufacturer may void users authority to operate this device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
+
-
+
-
+
-
Channel Selector
Parent Finder
ON/OFF
Nursery Unit (PD115977)
Model 2M16
Nursery Unit
(PD115978)
Model 2M15
2M15/2M16
Graco Children’s Products
150 Oaklands Blvd.
Exton, PA 19341
1-800-345-4109
Plug in cord
Rechargeable
Battery Pack
Model 2M16 - qty.1
Model 2M15 - qty.2
Batteries should be disposed of properly
by recycling.