Instruction Manual

ManualsBrandsGracie Oaks ManualsAccent FurnitureNilsa Wood Sliding Door Console Table

Page: 1

Instruction Manual

Product Name:

White Wood Sliding Door Console Table

A: body B: leg C: shelf D: bolt E: Allen key

1PC

2PCS

1PC 12PCS 1PC

Assembly:

Step 1: remove drawers from the cabinet.

Thank you for purchasing this product. This product has been manufactured with the highest standards of

safety and quality.

Parts Included (verify that you have all parts before starting assembly):

Summary of content (5 pages)

PAGE 1
Instruction Manual Thank you for purchasing this product. This product has been manufactured with the highest standards of safety and quality. Product Name: White Wood Sliding Door Console Table Parts Included (verify that you have all parts before starting assembly): A: body B: leg C: shelf D: bolt E: Allen key 1PC 2PCS 1PC 12PCS 1PC Assembly: Step 1: remove drawers from the cabinet.
PAGE 2
Instruction Manual Product Name: White Wood Sliding Door Console Table Step 2: The next step is to attach legs (B) on each side. In order to do this, lay cabinet where the back side is flat on the floor and the front of the cabinet is facing up. To avoid dents and scratches, lay cabinet on a clean and soft (but firm) surface. Screw legs into the side of the cabinet (turn clockwise to tighten).
PAGE 3
Instruction Manual Product Name: White Wood Sliding Door Console Table Step 3: Insert shelf into position and screw into place. Make sure the finished side of the shelf is facing the bottom of the cabinet, and not the bottom of the legs. Once you install the shelf, make sure the sides (legs) are tightened (if you did not do this in Step 2). Carefully flip cabinet to upright position. Important: Tighten each screw firmly.
PAGE 4
Instruction Manual Product Name: White Wood Sliding Door Console Table Step 4: Install drawers back into the cabinet.
PAGE 5
Instruction Manual Enjoy your cabinet! Care and Maintenance: Daily care: Wipe with clean and dry cloth. It is important to dry the table to prevent any moisture from soaking into the wood, which may cause it to warp or crack.