ECODRIFT Models: GDI-EXDRFT200 User Guide
Quick Start 1 Open Cap on the side ofyourEcoDrift 2 Turnon the Main Power Switch 3 Press the Standby Button to power on yourEcoDrift 4 SearchyourBluetooth Connectiononyour Smart Device 5 Pair& Play POWER+CONNECT onlyforthe originalownerwho purchasesthe unitfrom an authorizeddealer.Transfersdo not qualify for warranty protection. Grace Digital reservesthe rightto replaceanyout-of-stock ordiscontinued productwith a comparable product.Discontinuedproductsmaynot beavailableforwarrantyreplacement.
6) AVOID prolonged exposure to ultraviolet radiation(UVsunlight)andstrong magnetic fields. 7) Periodically check the rubber seal for premature wear. 8) Periodicallyclean the rubber with a soft moist cloth and ensure no objects such as dirt, hair, or sand are on the rubber seal ring. Do NOT use any oily solvent or chemicals for cleaning. 9) Rinse off the unit with tap water after use in saltwaterorswimmingpool.
ControlButtons &Operations On/Off Press the Standby Power Button onceto power On/Off. IMPORTANT: Standby Power function will NOT operate when the Master Power is set OFF. MasterPowerSwitchunderthe cap onthe side panel must be set ON for Standby & your EcoDrift to operate. Bluetooth Onceturnedon,theEcoDriftwill searchforyourBluetooth.Refer to Set Up Recommendations 1-2-3 part 3 fordetails. EcoConnect Functionality is only available betweentwounits.
Youshould always 1)Use the ECOXGEAR speaker in accordancewith anymusic or noiserules and regulations. 2) Use the proper ECOXGEAR mounts if you intend to mountthe unit. SpeakerVolume 4) Properly clean the ECOXGEAR and ensure the gasketshaveno sand, dirt, orwateron them priorto storageorremovingthe back cover. NOTE: Some Bluetooth devices mayrequiretobemanually set for maximum audio level. Your EcoDrift will beep to indicate when maximum volume setting is reached.
EcoTalk Press the EcoTalkbutton to activatethevoiceassistanton yourdevice(Siri,OKGoogle, etc.).Onceactivated,the speakerphone mic on your EcoDrift will hear your voice commands and transfer themto thevoiceassistant on your device. NOTE: Beforeusing the EcoTalk function,yourdevicemustbe connectedtothe EcoDriftvia Bluetooth. Notall deviceshave voice assistant functionality; refer to your device for details. WARNING: Dangerof explosion ifbatteryis incorrectlyreplaced.
water,cleanitthoroughlyafterusewith fresh water. BatteryIndicator Topreventfire or shock, do NOT attempt to charge this unit if it is wetor you suspect Connect USB to power source. LED on the top panel indicates USBconnectionchargingstatus. please returnthe unitto GraceDigital fora free assessment. If we have found that the unit has carried water, we will repair or replace the unit free of charge.
Set Up Recommendations 1-2-3 1 Charge Your EcoDrift Beforeyou poweron your EcoDrift, connect the USB Micro port to the USB cable and a 5V power source to fully charge your EcoDrift for best performance. NOTE: BeforeusingyourEcoDrift forthefirsttime,chargetheunit until all battery level indicators are green, indicating a full charge. Approximately 3 hours of chargingisrequiredfromalowto a full charge.
FCC STATEMENT: This device complies with Part 15 ofthe FCC Rules.Operation issubjecttothe following two conditions: 1)This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes ormodifications not expressly approved by the party responsible for compliancecouldvoidthe user’sauthorityto operate the equipment.
3 BluetoothPairing & YourAudio ConnectingWith Bluetooth: Connect ToYour Smart Device & Play Audio WhenyourEcoDriftis turnedon, the blue LED light on the top panel will flash, indicating the unitisreadytopair. Turnon Bluetooth on your Bluetooth device (Smart Device) and set the devicein pairing mode.AvailableBluetooth connections shall appear. Select the ECOXGEAR speaker from the list ofdiscovereddeviceson your Bluetooth device. Waitfor a fewsecondsuntiltheconnection is completed.
What’sintheBox EcoDrift Models: GDI-EXDRFT200...220 User Guide EcoDrift Unit UserGuide Carabiner USBCable When the ECOXGEAR selection is made and the Bluetooth connection is completed, your EcoDrift will announce: “Connection successful” Onceconnected,selectand play your desired audio. PairingMode: If the LED is not flashingorifyouwishtoplace your EcoDrift in pairing mode, pressandreleasethe Bluetooth buttonon thetop panel.
willlooktore-establishthat connection. If Bluetooth is turned offon your Smart Device,the EcoDriftmaynotautomatically lookforthedevice. RECOMMENDATION: If you arenotfamiliarwithBluetooth pairing for your Smartphone or otherSmart Device,referto the UserGuideforyourSmartphone to learn howto add and pair a newdevice(EcoDriftfor instance)toyourSmartphone using Bluetooth.
Unit Weight 17 ounces Output Power 15W(15Watt/ 4ohms), x1woofer(Ø3”) S/NRatio 88dB+/- 3dB PowerSource 3.7V, 2600mAh Lithium Ion Battery USB Input 5V, 1A Bluetooth Bluetooth®CSR4.2 Upto100ft/30m Play Time 15+ hours from full charge at 75%volumelevel EcoConnect - Wireless Stereo Connection of Two Speakers When you have two EcoDrift speakers and want to wirelessly pair them for surround sound, first follow the Bluetooth Pairing & Audio instructions to connectoneEcoDriftspeakerto yourdevice.
both of your EcoDrift speakers. Both speakers will announce, “EcoConnect, pairing speakers.” Waitapproximately4seconds for the speakers to wirelessly connect. Both speakers will announce “Connection successful. Speakerspaired.”andthe EcoConnect light will turn solid BLUE on both units once the connection is completed. Once the two EcoDrift speakers are connected via EcoConnect, start playing music from yourdevice. Bothconnected EcoDriftunitswillplaythe musicfromyoudevice.
POWER+CONNECT Important: Maintaining Waterproofness YourEcoDriftisonly waterproofwhenthecap is properly closed. In order toproperlyclosethecap, pushfirmlytobesurethe capfitsflatandflushalong theedgeswiththepanel. Ifnotproperlyclosedthe unitisNOTwatertightand maynotfloat. TheEcoConnectconnection betweenthe two EcoDrift speakers will NOT automatically re-connect after the speakers areturnedoff.Tore-establish EcoConnectbetweenthe speakers, after powering off, pleasefollowtheabovesteps.
Master Power Switch &Connections Master Power Switch EcoDrifthasa separateMaster Power Switch and a Standby Button. The switch MUST be set to the ON position to poweryour EcoDrift. Oncetheswitch is set to ON, use the Standby Button located on the top panel to turn the unit On/Off. AudioAUX-IN Connectanaudiodeviceusing the3.5mmcableconnection as an alternative to a Bluetooth connection to your EcoDrift. NOTE: Volume level must becontrolledfromtheaudio devicewhen connectedto the AUX-INconnection.