Specifications Bluetooth Compliance Bluetooth V 4.0 Frequency Band 2.4~2.4835GHz ISM Spectrum Modulation GFSK (Gaussian Frequency Shift Keying) Operating Range Up to 10m (indoor) Tweeter 3'' (76.2mm) tweeter Woofer 8'' (203.2mm) woofer Output Power 50 W (peak) Battery Capacity 12V, 7.0Ah Power Supply Input voltage: 100-240V~50/60Hz Charging Time About 10 hours Link TrueWireless Stereo (TWS) Link Range 30' (9.
FCC FCC This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC FCC This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Congratulations Thanks for purchasing the EcoBoulder. Enjoy this smart product, please read below instructions carefully. It's more than just a Bluetooth speaker! Care and Maintenance 1.Read the User' s Manual before using the EcoBoulder. 2.Do not attempt to service the EcoBoulder yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please contact your local reseller before you send the EcoBoulder for repair. 3.
Contents Page 1 Congratulations Features List 1 3 Unpacking 4 Care and Maintenance Layout 5~8 9 Battery/Charger Connections 10 11 LCD Icons Description Key Functions 12 ~ 13 14 ~ 19 Operations Troubleshooting 20 21 Specifications 2
Specifications Features List Bluetooth Compliance Bluetooth V 4.0 Frequency Band 2.4~2.4835GHz ISM Spectrum Modulation GFSK (Gaussian Frequency Shift Keying) Operating Range Up to 10m (indoor) Tweeter 3'' (76.2mm) tweeter Woofer 8'' (203.2mm) woofer Output Power 50 W (peak) Battery Capacity 12V, 7.0Ah Power Supply Input voltage: 100-240V~50/60Hz Charging Time About 10 hours Link TrueWireless Stereo (TWS) Link Range 30' (9.
Unpacking Once you have unpacked your product, make sure that all the parts shown below are available. If any pieces are missing or broken, please promptly call your dealer.
Layout Layout Top View Rear View Bar Handle Panel Lower Cover Rear Cover Front View Bottom View Top Cover Speaker mesh 5 Wheels 6
Layout Layout Top View Rear View Bar Handle Panel Lower Cover Rear Cover Front View Bottom View Top Cover Speaker mesh 5 Wheels 6
Layout Layout Side View Side View Closed Closed 4 Connect jack cover 4 Bolt Power jack cover Open Open USB jack AUX 1 jack Microphone jack AUX 2 jack USB jack Power cable jack 7 8
Layout Layout Side View Side View Closed Closed 4 Connect jack cover 4 Bolt Power jack cover Open Open USB jack AUX 1 jack Microphone jack AUX 2 jack USB jack Power cable jack 7 8
Key Functions Battery/Charger 12 2 3 4 1 5 RADIO 11 10 9 8 7 Insert the included power cable(as following pictures) to charge the EcoBoulder. Note that the EcoBoulder can be used with the power cable while it simultaneously charges the battery. The icon will be on when plugged into AC power. When the power cable is connected, movement of the top battery segment shows the battery is charging. When fully charged, all battery segments will be lit without blinking. 6 POWER 1.
Connections Microphone Input: You can input such as microphone, guitar, or other musical instrument. Auxiliary(AUX 1, AUX2) Input: This input can be used to connect a CD player, MP3 player. USB Charging Ports: Connect your device’s charge cable here to charge it. USB charging only functions when the EcoBoulder’s power is turned on. Two USB port are totally 3.1A maximum.
Battery/Charger LCD Icons Description Indicates the battery level of the EcooBoulder. Indicates the battery is very low. The EcoBoulder is in the BT mode. Insert the included power cable(as following pictures) to charge the EcoBoulder. Note that the EcoBoulder can be used with the power cable while it simultaneously charges the battery. The icon will be on when plugged into AC power. When the power cable is connected, movement of the top battery segment shows the battery is charging.
Key Functions 12 2 3 4 1 12 4 5 10 1 5 RADIO RADIO 11 2 3 9 8 7 6 11 10 9 8 7 6 1.Power Button: Turns EcoBoulder on or off. 2.Bluetooth Button: Press this button to enter pairing mode. Press and hold this button for 5 seconds to delete the paired device. 3.Source Button: Press this button to switch the next mode between Bluetooth, FM, AM, AUX 1 or AUX 2 cyclically. 4. Play/Pause: Press to play or pause a track from a connected Buletooth device.
Key Functions 12 2 3 4 1 12 4 5 10 1 5 RADIO RADIO 11 2 3 9 8 7 6 11 10 9 8 7 6 1.Power Button: Turns EcoBoulder on or off. 2.Bluetooth Button: Press this button to enter pairing mode. Press and hold this button for 5 seconds to delete the paired device. 3.Source Button: Press this button to switch the next mode between Bluetooth, FM, AM, AUX 1 or AUX 2 cyclically. 4. Play/Pause: Press to play or pause a track from a connected Buletooth device.
Operations Operations Power On/Off Adjust the Master Volume Power On: in power off mode, press briefly to power on the EcoBoulder. “Power On, Ready to Connect” verbal response will be heard. Power Off: Press briefly to power off the EcoBoulder. 1. Press 2. Press and hold continually(30 levels are adjustable). a. Press Pairing a Bluetooth Device 1. Turn on your Bluetooth device. 2. Power on EcoBoulder. “Power on, ready to connect” verbal response will be heard. 3.
Operations Operations Power On/Off Adjust the Master Volume Power On: in power off mode, press briefly to power on the EcoBoulder. “Power On, Ready to Connect” verbal response will be heard. Power Off: Press briefly to power off the EcoBoulder. 1. Press 2. Press and hold continually(30 levels are adjustable). a. Press Pairing a Bluetooth Device 1. Turn on your Bluetooth device. 2. Power on EcoBoulder. “Power on, ready to connect” verbal response will be heard. 3.
Operations Operations Play music(Bluetooth mode) Linking the EcoBoulder A and B together After the EcoBoulder is connected to your Bluetooth device, press briefly on the EcoBoulder to play, press to pause. Press again briefly to play previous song. Press a briefly to get to the next song. During playing, press and hold a for 2 seconds to switch EQ(Default, Bass Boost, Treble Boost, Rock, Jazz). Press to adjust th e EcoBoulder B EcoBoulder A volume.
Operations Listening(AM/FM mode) Press briefly to switch to FM or AM. Also, you can press briefly to set the tuner to FM or AM cyclically.Press a to tune in a radio station. To “seek”(jump to the next available station), press and hold either button down for a few seconds until it starts to seek a station. Press a to adjust the volume. AM/FM Presets Store a favorite radio station and quickly tune to a preset radio station. There are 6 positions for AM station and 6 positions for FM stations.
Operations Features List Linking the EcoBoulder A and B together 1. Clear and Crystal Sound , Superior Stereo Performance 2. Waterproof 3. Bluetooth mode, FM mode, AM mode, AUX 1 mode, AUX 2 mode Optional 4. Bluetooth Connection (Bluetooth V4.0) 5. Music Playing Control 6. Bluetooth Stereo (A2DP/AVRCP) 7. EQ(Default,Bass Boost, Treble Boost, Rock, Jazz) Optional 8. Microphone Input 9. AUX 1, AUX 2 Input 10. USB Charging Ports 11. Master Volume Adjustable(30 levels) 12.
Operations Master Routing is set to Left, the Slave Routing setting is Right. Press and hold to switch the TWS mode. There are 3 mode.
Troubleshooting The sound is distorted Try lowering the volume control of your sound source or music instrument. Also, try to reduce the overall volume of the EcoBoulder. Cannot Pair With Bluetooth Device Make sure that your device is compatible with Bluetooth. Turn off your EcoBoulder and Bluetooth device, then power on and reconnect. There is a high-pitched whistling noise when using microphones This is probably feedback. Point the microphones away from the speaker.
Specifications Features List Bluetooth Compliance Bluetooth V 4.0 Frequency Band 2.402~2.480GHz ISM Spectrum Modulation GFSK ,π/4-DQPSK, 8DPSK Operating Range Up to 10m (indoor) Tweeter 3'' (76.2mm) tweeter Woofer 8'' (203.2mm) woofer Output Power 50 W (peak) Battery Capacity 12V, 7.0Ah Power Supply Input voltage: 100-240V~50/60Hz Charging Time About 10 hours Link TrueWireless Stereo (TWS) Link Range 30' (9.