Bluetooth integrated amplifier USER Guide Model no.
Important Safety Instructions and Warnings Please read before installation WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture The product should not be exposed to any dripping or splashing liquid Objects filled with liquids, such as vases, should not be placed on the product No open flame sources, such as lighted candles, should be placed on the product Keep the remote control battery or optional rechargeable battery away from children.
ADVISORY This Product is intended for North American markets. The GRACE BTAR512/513 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC ADVISORY FCC Compliance and Advisory Statement: This device complies with Part 15 of the FCC Rules.
Front Panel Power: Press to turn unit on from standby. If there are no current Bluetooth saved pairs the amplifier will automaticially go into pairing mode. The amplifier will remember your previous settings, source selection, and Blueooth pairs from your prior listeneing sessions. Bass: Press BASS+ to increase bass or BASS- to decrease bass. When the LED light is on the center LED the bass is set to the neutral position. Treble: Press TREBLE + to increase treble or TREBLE- to decrease treble.
Back Panel* ANT.: Thread the included Bluetooth antenna to this screw DC IN: Insert the included power adpater into this connector USB CHARGE: Optionally charge smartphones or tablets. (No audio support). *The BTAR 513 deletes the USB jack and replaces it with a sub woofer out jack. AUX IN: Optionally connect any standard wired audio source LINE OUT: Optionally connect to a home stereo line-in connection, computer’s audio input jack, or powered speakers.
Remote Control 1. Power button: Turns the Bluetooth integrated amplifier on/off 2. Bluetooth: Press to play audio from a connected Bluetooth device. Press for 2 seconds to enter Bluetooth pairing mode. Light will flash while pairing and constant when pairing is successful. 3. Mute: Mute on/off 4. Track selection: previous song, play/pause, next song 5. Volume: Press ‘+’ to increase volume or ‘-’ to decrease the volume 6. Treble: To increase treble press ‘+’, to decrease treble press ‘-’ 7.
Specifications Model: GDI-BTAR512/513 100 watt class D Digital amplifier (50 watts per channel) - Bluetooth 4.0 and aptX, remembers 8 Bluetooth devices - 100-240V, 25V 4.3A switching power supply - THD < 0.1% @50w - Frequency response: 20Hz – 20kHz - Channels: 2 (stereo) - Dimensions: 5.9” x 4.9” x 1.
Your Bluetooth integrated amplifier is supported by a limited manufacturer’s warranty for product defects in material or workmanship that may be evident under normal use for 1 year from date of purchase from an authorized franchisee or dealer. The warranty stated herein is the only warranty applicable to this product. All other warranties, expressed or implied are hereby disclaimed and are limited by the written limited warranties contained herein.
