Mini-Bullets II Weatherproof Wireless 900MHz Speaker System User Guide Model no.
IMPORTANT: Please read your User’s Guide before using your system INTRODUCTION Your MINI-BULLETS II speaker is designed using the latest wireless technology to enjoy audio anywhere inside or outside your home. Simply connect the desired audio source (Radio, TV, VCR, Hi-Fi and CD/MP3/VCD/DVD player) to the speaker transmitter. IMPORTANT SAFETY INSTRUCTIONS 1. Read & keep these instructions. 2. Keep these instructions. 3. Follow all warnings and cautions 4. Do not use this apparatus near water. 5.
FEATURES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Automatic PLL (Phases Lock Loop) scanning system on speaker receivers. PLL (Phase Lock Loop) transmitter transmission system.
SET UP 1. TRANSMITTER 1. Connect the AC power adaptor included with your unit to electrical wall outlet. 2. Plug the AC power adaptor included with your unit in the jack located on the rear of the transmitter. Option 4 X “AA” size ALKALINE batteries can be used to power the transmitter for portability. NOTE: ensure battery polarity (+/-) are matched and correctly aligned correct when inserting the batteries in the compartment 3.
1. Connect the 12V power adaptor to the DC input jack on the bottom of each speaker, then plug into the power wall outlet. You may also insert 6 x ‘AA’ size ALKALINE batteries into the battery compartment. Ensure the batteries polarity (+/-) are correct, at the bottom of the speakers (batteries not included in the package). 2. Press the POWER button and turn the speakers ON. The POWER LED will light up in blue. Switch off the speakers by pressing the POWER button on the speaker, and the LED will turn off.
button is pressed, frequency tuning starts automatically and it stops when a signal is detected. The POWER LED will illuminate steadily once connected. Keep a distance of the speaker up to 7 meters apart from transmitter, and then press “SCAN” AUTO TUNE button for best tuning reception. You should now be able to place the speakers freely from room to room without disruption.
NO SOUND - Check that the batteries are fully charges on the speaker - Check there is not too much water retention inside the speaker grill. Turn over the speaker and let the water drain out from the speaker grill. - Ensure the AC/DC adaptor is fully inserted into the AC outlet and the power connection input on the transmitter. - Ensure the speaker is switch ON. - Speaker’s battery capacity is low, connect the AC/DC adaptor to the speaker. - Ensure the TV or audio component is ON.
Your MINIBULLETS II (GDI-AQBLT300 /AQBLT31 /AQBLT300B /AQBLT31B) is supported by a limited manufacturer’s warranty for product defects in material or workmanship that may be evident under normal use for 1 year from date of purchase from an authorized franchisee or dealer. The warranty stated herein is the only warranty applicable to this product. All other warranties, expressed or implied are hereby disclaimed and are limited by the written limited warranties contained herein.
Grace Digital Inc., San Diego, CA P.