Mini Projector with Blutooth User’s Guide for Model PJ300 v2577-01 For the most up-to-date version of this User’s Guide, go to www.gpx.
Safety Instructions & Warnings Important Safety Instructions • • • • • • • • • • • • • • Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• If the air vents become clogged or dirty, use a vacuum or air compressor and nozzle to clean. Do not use canned air, as the gas may leave a residue inside the enclosure. • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
Table of Contents Overview Features - 5 Includes - 5 Projector Features & Inputs - 6 Controls - 7 Remote Functions - 8 Batteries - 8 Menu Options Picture Menu - 9 Sound Menu - 10 Options Menu - 11 Projector Setup Power - 12 Projector Placement - 12 Viewing Options - 13 Ceiling Mount - 14 Angle Adjustment - 15 Image Adjustment - 15 Connecting Your Projector HDMI - 16 Audio/Video Input - 17 MicroSD & USB Storage Devices - 18 Computer Video (VGA) - 18 External Audio Bluetooth - Pairing to Wireless Speake
Overview Features • Supports 480p, 720p, 1080i, 1080p • Native Resolution: 800 x 480 Includes • Remote control: requires 2 AAA batteries (not included) • Aspect Ratio: 16:9, 4:3 LB • 3.5mm to 3 x RCA audio/video cable • LED bulb • AC/DC power adapter • Brightness: 42 ANSI lumens • User's Guide • Built-in Bluetooth transmitter • I/O: 2 x HDMI, VGA PC, USB, Micro SD card, AV, 3.5mm Headphone Jack • Projection size: 32-150" (best image size: 40-70" • Display distance: 3.9-12.1 ft. (1.2-3.
Projector Features & Inputs 1 2 3 4 5 6 7 8 9 10 11 12 14 6 13
1. Projector Lens 8. Height Adjustment Peg 2. Focus Adjustment 9. Micro SD Card Port 3. Keystone Adjustment 10. HDMI Input 1 & 2 4. Controls & Power Indicators 11. USB Port 5. VGA/PC Input 12. 3.5mm Audio Output 6. Remote sensor (duplicated on the front of the projector) 13. DC Power Port 7. Speakers 14. 3.5mm AV Input Conrtols Source Press to change media source mode. Power/Power Indicator Arrows/OK/Volume +/- Menu Press to access on-screen menus and options.
Remote Functions Power Press to power ON/OFF. Mute Press to mute volume. Arrows/OK Press to navigate and confirm selections in Settings and other menus. Return Press to return to a previous page or setting in the on-screen menus. Menu Press to access projector Settings. Vol + / Vol − Press to adjust audio level. Source Press to select media source (VGA, HDMI, AV, USB, SD). Batteries Requires 2 AAA batteries (not included).
Menu Options Change projector settings by pressing the Menu button and selecting the Setup icon. Note: Not all settings are user adjustable. Picture Menu 1. Picture Mode Select Vivid, User (custom), Soft, or Standard. 2. Contrast, Brightness, etc. Set Picture Mode to "User" to adjust these settings. 3. Color Temperature Select Warm, Cool, or Medium. User (custom). 4. Aspect Ratio Select 16:9, 4:3, or Auto. 5. Noise Reductions Select Off, Low, Middle, High, or default. 6.
Sound Menu 1. Sound Mode Select Music, Movie, User (custom), Sports, or Standard. 2. Treble & Bass Set Sound Mode to "User" to adjust these settings. 3. Balance Adjust the audio balance. 4. Bluetooth Speaker ON/OFF Turn Bluetooth capability ON/OFF.
Options Menu 1. OSD Language Select English, French, or Spanish for the On Screen Display. 2. Restore Factory Default Reset the projector and restore all of the default settings. 3. Rotate Flip and mirror the screen image. 4. OSD Duration Set how long the menu will be displayed after you stop using the menu. 5. Software Update Update software using a USB drive.
Projector Setup Power Plug the AC/DC power adapter (included) into a standard wall outlet and the DC power input on the side of the unit. After connecting power, please allow approximately 5 seconds to pass before powering the unit ON. Projector Placement For best results, place the projector in a dark room or other dimly lit area. Use the unit with a dedicated projector screen for best picture resolution. A variety of screens and screen sizes can be used.
FRONT TABLE Viewing Options The projector can be used to project onto a wall or screen, mounted from the ceiling or on a table. When projecting from the rear position, a special screen will be needed (not included) to display the image. FRONT CEILING 72 " 60 " SCREEN 50 " 45 " 37 " THE CENTER OF LENS REAR TABLE REAR CEILING Be sure to aim the remote at the sensor on the front or rear of the projector.
Ceiling Mount To mount the projector from the ceiling, you will need mounting hardware recommended by a professional. Mounting hardware and instructions are not included. Before mounting, be sure the ceiling structure can support the weight of the projector and the mount itself. It is recommended to have this unit mounted by a professional. 1.
Angle Adjustment Use the Angle Adjustment Knob to fine tune the projector's height. Image Adjustment 1. Focus Adjustment Increase or reduce to image size to sharpen image. 1. Keystone Adjustment Adjust image corners to reduce image distortion.
Connecting Your Projector HDMI HDMI offers superior sound and picture quality, and is the easiest way to play media from a computer, Blu-Ray player, or other device with an HDMI output. Requires an HDMI cable (not included) and a device with an HDMI output. 1. Using an HDMI cable, connect the HDMI 1 or 2 input on the projector to the HDMI output on your media player or computer. 2.
Audio/Video Input Requires a 3.5mm to RCA audio/video cable (included). 1. Connect the 3.5mm to RCA audio/video cable to the AV input on the unit. 2. Connect the 3.5mm to RCA audio/video cable to the RCA stereo audio outputs and composite video output on the media player. 3. Set the projector's Source to AV and use the controls on the connected player to select and play media. AV IN R AUDIO OUT L VIDEO VIDEO OUT Connect AV cable (included) to media player's AV outputs.
MicroSD & USB Storage Devices Supports MicroSD cards and USB drives up to 32GB. Supports AVI, MOV file formats. 1. Load a USB drive into the USB Port. 2. Set the Source to Media Player, then use the Arrow buttons to select "C:Drive" or "D:Drive" (C:Drive is the SD card, D:Drive is the USB). 3. Use the Arrow buttons to select Music/Photo/Movie, then press the OK button to begin playing content from the connected storage device.
External Audio The PJ300 has a built-in speaker. However, you can also connect external speakers for more sound options. Bluetooth - Pairing to Wireless Speakers or a Sound Bar NOTE: Bluetooth is OFF by default when the projector first powers ON. Bluetooth can be turned ON or OFF from the OPTIONS Menu. 1. Enable Bluetooth on the external speakers, or sound bar (Bluetooth receiver) to which you wish to connect. 2. Power on the projector and make sure the projector's Bluetooth is ON (see note above).
Customer Support Contact Information Website: www.gpx.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Made Green Warranty For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.gpx.com International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.gpx.