GPT-T1 Gpacers Poseidon Tracker User Guide Gpacers Technology
FCC WARNING 15.19 • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.105 (for FCC 15B devices) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
IMPORTANT NOTES Radio Frequency Safety Statement The Gpacers Poseidon Tracker is a radio frequency product developed with the IoT technology and should comply with RF regulations when using. • Misuse of GPT’s DISTRESS Function may cause unnecessary rescue efforts. Please ONLY use the DISTRESS Function in case of emergency and only use the Call Function during actual situations. • The antenna and the batteries are assembled and sealed inside the waterproof housing.
1. GPT SYSTEM SUMMARY • The portable Gpacers Poseidon Tracking and Rescue System, known as GPT. The GPT devices provide divers with a real-time, long range, location index, mesh networking capacity and smart safety monitoring service. This fully autonomous system can be easily deployed in any remote area when needed. • Unlike other safety equipment only sends a distress signal after hazard occurred, it’s unclear who will receive the signal and if a rescue operation will be launched.
Gpacers Poseidon Tracking And Rescue System Portable, Real-time, Easy To Operate T1, A1 Transmitters A1 Receiver GPT App Connection via Wi-Fi A1 Repeater Carried by diver Size:10x3x2.7(cm) Use A1 on the boat or on shore Size: 16x6.7x5(cm) Placed at a higher altitude or in a drone, to overcome communication obstacles of various terrain features Main features 1. Simultaneously tracking and monitoring up to 100 transmitters 2. Capable to check battery level of all GPT devices 3.
GPT: A fully autonomous, networkable safety monitoring system GPT-A series models (A1; A2; AS) have multiple function modes: • TX-transmitter mode : is a terminal equipment carried by personnel; sending out signals to report the identity, coordinates, and status of personnel.
APPLICATIONS : DIVERS, SEAFARERS, SAILING TEAMS, MOUNTAINEERING TEAMS, ARMY AND NAVY, FIRE BRIGADE, FOREST FIRE RESCUE...
SAT-satellite communication mode Multiple transmitters GPT-A1 GPT-A2 GPT-A1 GPT-T1 GPT-T1 GPT-T1 Long rang RF (LoRa) GPT-AS : built-in a satellite communication module, or connected with external satellite equipment. Satellite transceiving server GPT App Smart monitoring console Function Mode ■ Transmitter function : – Can be released from underwater by hanging on a buoyancy rings (GPT-A1, A2) or buoyancy bags (GPT-T1, T2) to the surface to transmit data: identity, status, and coordinates.
Receiver/Repeater Placedon on board Receiver/Repeater Placed board or at a altitude higher altitude onshoreoratonshore a higher ID、Location、Status Real Time Tracking+ Danger Precaution + History Record Simple system suitable for small ships TX RX
Recommend to install repeater on the top of large ships Top Cabin TX-OK mode TXdistress mode RP mode RX mode Remarks: The example here is explained with GPT-A1 TX RP RX
Archipelago Environment Multi-point monitoring on shore Sea World Diving Company released GPT-T1 from underwater on September 11, 2020, to actually verify the superior performance of the GPT system. GPT-T1 is the lightest transmitter on the market, only 65 grams including battery, can be easily hung on a buoyancy bag and released from underwater。 GPT-A1, A2 can be released from underwater with an in-house designed buoyancy ring.
2. Initial Setup STEPS 1 2 3 4 TODO TIPS • Search "GPT" at the Play Store (Android) or Apple Store (Apple). • For each function page of GPT App, tap on the help "?" button for instructions. • On the GPT App homepage, tap on the "DEMO" button to practice various functions. • The Wi-Fi password is "Gpxxxxxxxx" and 8 digits are the receiver's identity code displayed on the receiver. • The battery needs to be charged or replaced if the power level is less than 40%.
4. Appearance and functional mode PS. Sw/switch ; DS/distress ; stdby/standby ; RX/receiver ; TX/transmitter ; RP/repeater ; TRX/transceiver TX_DS/transmitter DISTRESS function ; TX_DST/transmitter DISTRESS TERMINATING function ; TX_OK/transmitter OK function ; Appearance LED Status Indication Power Sw and TX_OK LED color TX_DS Green When the battery level is more than 50%, after each data transfer, flashes for 0.5 seconds for 3 times.
HOW TO GET THE DEVICE ID Method 1: Use GPT-A1 to display the ID and coordinates of GPT-T1 STEP 2 The GPT-T1 ID and coordinates will be displayed on the GPTA1 screen (received distress device) STEP 1 GPT-A1 set to RECEIVER mode GPT-T1 set to DISTRESS function Method 3: Read from the SELECT MEMBERS PAGE of GPT App Method 2: Read the label on the PCB inside The device ID is labeled on PCB as 50000256 ① Replace Battery • • Remove screws, Open the top cover, Oring ② Apply silicone oil: • concave surfac
Accessories (see below) and product warranty card Item Usage Size Material Qty Screw and nut Housing seal M2 x 10 mm Stainless steel 5 set Hex Wrench Housing seal 14*45 mm carbon steel 1 Silicone oil pack Housing seal 2 cc Silicone oil 1 O ring Housing seal 23*86 mm Silicone 1 Elastic thread Product fixation 250 mm elastic rubber band 2 Capsule buckle Terminations of elastic thread 3*11 mm Stainless steel 2 Accessories assembling ① • • • Trim the length according to yo