DVD+VCR DV1140 User Manual
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be repaired by the user.
Table of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Use Audio CD 3 inch/5 inch (8 cm/12 cm) disc In addition, this unit can play a CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files. z z z z otes Depending on the conditions of the recording equipment or the CD-R/RW disc itself, some CD-R/RW discs cannot be played on the unit. The unit cannot play discs that contain data other than MP3/WMA and CD-DA data. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.
Front Panel POWER Switches the DVD+VCR ON and OFF. COPY Copies a DVD in the DVD deck to a VHS tape in the VCR deck. INTRODUCTION AV2 IN (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, Another VCR). Cassette Compartment (VCR deck) Insert a video cassette here. Disc Tray (DVD deck) Insert a disc here. PLAY ( N ) Starts playback of a disc or tape. Remote Sensor Point the DVD+VCR remote control here.
Display Window The DVD deck is selected. Lights when a disc is loaded in the DVD deck. Flashes when there is no disc. Indicates when Progressive scan is active. Indicates repeat mode. Indicates when the DVD+VCR is locked. A timer recording is programmed or in progress (VCR deck only). A cassette is in the VCR deck. The VCR deck is selected. DVD [P] VCR REC PM TV Lights when TV mode is active (See page 22.) Indicates PM time. (AM is not displayed.) DVD+VCR is Recording.
Remote Control POWER Turns the DVD+VCR ON and OFF. TV/VCR Switches between your TV tuner and the DVD+VCR tuner. DISPLAY, CLK/CTR Accesses the on-screen display. Switches among the clock, tape counter and tape remaining modes on the display. b/B/v/V (left/right/up/down) - Selects menu items - CH(v/V): Selects channels on the VCR. - TRK(+/-): Manually adjusts tracking. SETUP/MENU Opens or exits DVD setup menu and VCR menu. TITLE Displays the disc’s Title, if available.
Rear Panel VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, Another VCR). DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs. COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD OUT) Connect to a TV with Y Pb Pr inputs. AUDIO OUT (Left/Right) (DVD OUT) Connect to a TV, amplifier, receiver, or stereo system. AC Power Cord Plug into the power source.
Connections Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD+VCR. Use connections described on pages 11-13. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. For better sound reproduction, connect the DVD+VCR’s DVD/VCR AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment.
Connections (Continued) Basic TV Connections Make one of the following connections, depending on the capabilities of your existing equipment. RF coaxial connection Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R). ote If you use this connection, tune the TV to the DVD+VCR’s RF output channel (CH 3 or 4). How to set the DVD+VCR’s RF output channel 1. Set the TV to the VCR channel (3 or 4) depending upon the selected channel. 2.
Connections (Continued) Optional, Preferred TV Rear of DVD+VCR PREPARATION Connections (Continued) ote You can ONLY listen to DVD playback using COAXIAL (X) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jacks. (See page 12.
VCR Operation Setup On-Screen Display (OSD) The On-Screen display provides feedback on the current status of the DVD+VCR. ❶ ❷ ❸ PLAY SP HI-FI OCT 8 , FRI ❹ ❺ CH 4 STEREO 2:15 PM ❻ ❶ TAPE SPEED DISPLAY ❼ Shows the current tape speed. ❷ FUNCTION DISPLAY Indicates the function in progress. ❸ HI-FI DISPLAY Indicates when this unit is playing back tape recorded in Hi-Fi. ❹ CHANNEL DISPLAY Indicates the selected channel (or LINE1, LINE2).
Setting the VCR Setup Menu Channel Selection 1 Press MENU and the MAIN menu will appear. v/V V to select the SETUP menu, then 2 Press press ENTER. The SETUP menu will appear. This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Preparation: Connect the DVD+VCR to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD+VCR on page 11.
VCR Operation Setup (Continued) Setting the Clock ote The DVD+VCR gives you two ways to set the time and date: the Auto Clock Feature or manually. The Auto Clock Feature enables the DVD+VCR to set the clock when the DVD+VCR is turned off. Things to know before starting The clock uses the 12-hour system. (Be sure to set AM and PM correctly.) The initial Clock Setting is JANUARY 1, 2004, 12:00 AM.
DVD Operation Setup b/B to change the setting of an item. 3 Use The number buttons can also be used for setting numbers (e.g., title number). For some functions, press ENTER to execute the setting. PREPARATION Caution: Before using the remote control, press the DVD button to select the device to be operated. Temporary Feedback Field Icons General Explanation This manual gives basic instructions for operating the DVD+VCR.
DVD Operation Setup (Continued) Initial Settings Disc Language (Audio, Subtitle, Menu) In this menu system, there are several ways to customize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings. If you press SETUP, only the first level of the menu system will appear on the TV screen. The second and third level can be displayed by pressing B.
DVD Operation Setup (Continued) Each DVD disc has a variety of audio output options. Set the player’s Audio Output according to the type of audio system you use. Dynamic Range Control (DRC) With the DVD format, you can hear a program’s soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest and quietest scenes), e.g.
DVD Operation Setup (Continued) LOCK Password DVD Setting your password LOCK Rating Unlock Password New Country Code US Move Rating If you change the rating level to “7” or lower, you must enter a 4-digit “password” to prevent playback of discs with higher ratings. Select DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc.
Normal Playback Search Preparation: This function lets you search for a desired tape section in either direction: forward or reverse quickly and visually. Turn on the TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’s source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. Set the Output Source to VCR as shown in “Setting the Output Source” on page 6.
Operation with tape (Continued) Normal Recording Timer Recording Preparation: This DVD+VCR can be programmed to record up to 8 programs within a period of 1 year. For unattended recording, the timer needs to know the channels to be recorded and the starting and ending times. Turn on the power of both the DVD+VCR and TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’s source selector to VIDEO.
Operation with tape (Continued) Use V to choose the SPEED option. B to choose the desired recording Use b/B speed (AUTO, SP or SLP). 11 AUTO mode determines how long tape is left and switches speed from SP to SLP, if necessary, to complete recording the program. There will be some picture and sound distortion at the point of the speed change. Checking (Erasing) the Timer Program Programming can be checked whenever the DVD+VCR is turned on. 1 Press MENU and the MAIN menu will appear.
Operation with tape (Continued) Instant Timer Recording Dubbing and Editing Instant Timer Recording allows you to make a recording easily of a preset length without using the program timer. If you wish to edit or dub your camcorder (or another VCR) recordings to this DVD+VCR, the rear (or Front) panel mounted Audio and Video (A/V) input jacks make the connections quick and easy. These direct A/V jacks will also provide better picture results than using the RF jack on the rear panel.
Operation with tape (Continued) MTS (Multi-Channel TV Sound) This DVD+VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The information below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode. This DVD+VCR will decode MTS stereo and bilingual (SAP) off-the-air broadcast sound signals.
Operation with tape (Continued) Tape Counter Memory Feature Additional Information (VCR) Real-Time Counter In manual recording, Timer recording, Instant Timer Recording, playback, or fast forward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette will stop at the beginning of the tape and be ejected, and the DVD+VCR will turn itself off (Only when no disc). After you have finished using the DVD+VCR, rewind, eject, and remove the cassette.
Operation with DVD Playback Setup Moving to another TITLE DVD Turn on the TV and select the video input source connected to the DVD+VCR. Audio system: Turn on the audio system and select the input source connected to the DVD+VCR. Set the Output Source to DVD as shown in “Setting the Output Source” on page 6. 1 Press OPEN/CLOSE (ZZ) to open the disc tray. your chosen disc in the tray, with the 2 Load playback side down. Z) to close the tray. Press OPEN/CLOSE (Z 3 Playback starts automatically.
Operation with DVD (Continued) General Features (Continued) Zoom Repeat The Zoom function allows you to enlarge the video image and to move through the enlarged image. Title DVD DVD Video Discs - Repeat Chapter/Title/Off 1 To repeat the currently playing chapter, press REPEAT. 1 Press ZOOM during playback or still playback to activate the Zoom function. The square frame will be displayed in the right bottom of the picture.
Operation with DVD (Continued) General Features (Continued) Additional Information (DVD) Special DVD Features Last Condition Memory Checking the contents of DVD Video discs: Menus This player memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memorized, the latest stop position is automatically recalled. Title Menu DVD 1 Press TITLE.
Operation with Audio CD and MP3/WMA Discs Notes on MP3/WMA Recordings Playing an Audio CD and MP3/WMA Discs CD MP3 WMA The DVD+VCR can play an audio CD. Also, the DVD+VCR can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on the right side of this page. 1 Insert a disc and close the tray. Audio CD; Audio CD menu appears on the TV screen. Go to step 3. MP3/WMA disc; The MP3/WMA menu appears on the TV screen.
Operation with Audio CD and MP3/WMA Discs (Continued) CD MP3 Random WMA CD MP3 WMA 2 To return to playback, press PLAY ( N ) or press PAUSE/STEP (X) again. 1 Press RANDOM during playback or when playback is stopped. The unit automatically begins Random Playback and “Random” appears on the menu screen. Moving to another Track 2 To return to normal playback, press RANDOM repeatedly until “Random” disappears on the menu screen. 1 Press PAUSE/STEP (X) during playback.
Operation with Photo Disc Viewing a Photo Disc JPEG This DVD+VCR can play discs with JPEG files. Before playing JPEG recordings, read the "Notes on JPEG Recordings" at right. 1 Insert a disc and close the tray. The JPEG menu appears on the TV screen. JPEG Preview List JPEG Folder 1 Slide Show JPEG Folder 2 Speed JPEG Folder 3 JPEG Folder 4 Moving to Another File Press . or > once while viewing a picture to advance to the next file or to the previous file.
CD MP3 WMA Programmed Playback with Audio CD and MP3/WMA Discs Repeat Programmed Tracks The Program function enables you to store your favorite tracks from any disc in the player memory. Program can contain 99 tracks (Audio CD) or 300 tracks (MP3/WMA). 1 Insert an Audio CD or MP3/WMA disc. 2 Press v V b B to select a track on the List. PROGRAM. Or, press v V b B to highlight 3 Press the “Add” icon then press ENTER. Erasing a Track from Program List Audio CD or MP3/WMA menu will appear.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Symptom Correction No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but the DVD+VCR does not work. No disc is inserted. No tape is inserted. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) No picture. The TV is not set to receive DVD+VCR signal output.
Troubleshooting (Continued) Cause Symptom Correction Those channels were deleted with the CH. ADD/DEL option. Use CH. ADD/DEL. to restore channels. See “Channel Selection” on page 15. Picture and sound of broadcasting channel are weak or missing. Antenna or cables are loose. Tighten connections or replace cable. Wrong TUNING BAND option is being used. Try all TUNING BAND options. See “Channel Selection” on page 15 for details. Camcorder image is not shown. Camcorder is off.
Troubleshooting (Continued) Video Head Cleaning Video head clogging The video heads are the means by which the unit reads the picture from the tape during playback. In the unlikely event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be determined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely snowy). If this is the case, use a high quality head cleaning system or have them cleaned professionally.
Language Code List Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 18).
Country Code List Enter the appropriate code number for the initial setting “Country Code” (See page 20).
Specifications General AC 120V , 60 Hz 21W 430 X 78.5 X 273 mm (16.9 x 3.1 x 10.8 inches) (w x h x d) 4.0 kg (8.82 lbs) 5˚C to 40˚C (41˚F to 104˚F) 5 % to 90 % NTSC REFERENCE Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Signal system Inputs ANTENNA IN VHS VIDEO IN VHS AUDIO IN 75 ohms (VHF/UHF/CATV) 1 Vp-p 75 ohms, sync negative, RCA jack x 2 -6.
WARRANTY LIMITED WARRANTY Who Provides the Limited Warranty During the warranty period, the GoVideo Warranty Administrator will honor service for 90 days labor, 1 year parts from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage. Remote controls are warrantied for 90 days from the date of purchase. Who is Protected This warranty protects the original consumer owner of this GoVideo product.
