Table of Contents Safety instructions included in the Box introduction Getting Started Roves Home App ser Servicing instruction Troubleshooting Appending Compliance Information 0 Tl 12
READ AND SAVE THESE INSTRUCTIONS Safety Instructions General Safety & Only use the fan a5 described in this manual, « To reduce the risk of fire or electric shirk, do not use this fan with any solid-state speed corridor! device.
Power Cord & Plug ® This fan has a polarized plug (one blade Is wider than the other). Te reduce the risk of electric shock, this plug is only mended to tin a polarized outer one way, if the plug does not fully fit in the outset, reverse the plug.If it still doss not fit, contact 2 qualified electrician, Do not attempt to defeat this safety feature. » Never use the cord as a handle or otherwise yank, spiral or stretch the power cord.
introduction Novae Smart Alr Circulatory Fan modulates both warm and cool alr from your tabletop or the floor to the whole room, which helps regulate room and body temperature to meet all your coaling needs with variable speed control This sleek and space saving fan can fit in your boardroom, lichen, office, or any medium or small-size room, peaking your home simple but stylish. Part Names # Front Guard fs. Rear Guard . Fan Blade en .
Controls Power Button Touch to turn on or off, When powered on, the fan will restore to the speed, mode, and DIY set previously.
Indicator Status Thar Solidi i ah Haw Sufi Whits Ah A Har Sid White © Divine Central Solid White 1 Le hies Solid white Spend i Lenin Speed Sol White i High Speed Sui White a Serenade Belle wnt Mods 8 Nature Mods Sail white wn Sah Mode Solid Whi WH ar Wi Solid White Functions Memory Function This fan will remember ity previous settings when powered off, The settings will become active again whee the fan is turned back on.
Getting Started 1. Place your fan on a dry, level surface. 2. Pug the power cord Into a polarized 120 V AC wall outlet. 3, Touch tha buttons on the control pane! to adjust the spas, the made, start or stop the oscillation, and set a timer, 5.
Govern Home App You can aces more features using Govern Home App.
User Servicing Instruction ® Fuse replacement *only applicable to US power cord and plug, Note: The product requires 2 2.5 A 125 V fuse. 1 Grasp fhe plug and remove from the socket or other satiety device. Do not unplug by pupping the cord, 2. Slide to open the fuse cover on top of the plug towards blades, 3, Remove the fuse carefully by using a small screwdriver to pry it out of the compartment by its natal ends. 4, Repave only with 2.5 A, 125 V fuse to veld the risk of fire, 5.
For App & Connectivity 1. Cannot conned to Govern Home app. » Make sure the Bluetooth of your smartphone is enabled and your smartphone Is not connected with other Bluetooth devices, ® Enable the smartphones Location Services. « Try connecting with another smartphone. @ Make sure your app Is the latest version, ® Wake sure your smartphone is connected to the GHz network and confirm the network is working correctly. Marks sure the WI-Fi password you entered is correct.
Compliance Information FCC Statement Iris device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: £13 this device may not cause harmful interference, and {23 this device must accept any interference received, including interferon they may cause undesired operation, Warning: Any changes or modifications not expressly approved by the party responsible for compliance could cold the user's authority to operate the equipment.
FCC Radio Frequency Exposure Statement The device has bean evaluated to meet general RF exposure requirements. The device cen be used In fixed/mobile exposure condition. The min separation distance Is 20um. FOC HRZAQABHIT The following importer is the responsible party Name: GOVERN MOMENTOUS) TRADING LIMITED Address: 13013 WESTERN AVE STE § BLUE ISLAND IL 80406-2448 Email: Contact information: HTTP www, JOVEE.
{commandes Bouton d'alimentation Appuyez pour maître-cylindre. Une fois atrium, la ventilateur reprend ia vitesse, ie mode at la DY définis précédemment, Relargue : Le minuteur défini la fols présidente ne sera pas restaure lorsque fe ventilateur est rallumé, ® Bouton de minuteur Appuyer de manière répétée pour définir un cycle de minuteur de 0 7 heures at appuyez pendant 2 5 pour teindre. Bouton de mode Appuyer pour passer su mode Turbo f Nature Tg ot wre .
Démarrage 1. Lavez votre ventilateur sur una surface asbeste of plana, 2 tranchez le cordon alimentation dans une prise murale polarisée de courant alternatif TV. 3. Appuyer sur les boutons du panneau de contre pour régie la vitesse, ie mode, démarrer ou grincer le déplacement en définir un minuteur. 5. Pour déplacer le ventilateur, commences par 'éteindre ef rattrape par la poignée Intégrée située sur te bord extérieur du ventilateur.