Product Specs

Applicable equipment:
SAMSUANG:S6/S6edge,S6edge+S7/S8edge/S9,Note5,Note8
LG:G3,G5/G5+,G6/G6+
IPHONE:iphoneX,iphone8,iphone8plus
Nokia:Lumia830,Lumia920,Lumia1020,Lumia1520,Lumia930
Google:Nexus4,Nexus5,Nexus6
1.
2.Place your Qi-enabled device on the charging pad
Charging area
LED
Power input
Plug in the cable to the appropriate adapter, then
connect it with wireless charger, led indicator will
flash once at that time, and standby mode on.
(Note Please: Use the most appropriate adapters
for best results.)
Input:
5V /2A，9 V /1.8A
Please site your smart
phone at the center of
the pad correctly for
high-speed charging.
Inappropriate place may I
nfluence the charging
speed or even result in
charging disconnect.
Product specifications：
Package Contents：Wireless charger*1，
USB cable
*1，Manual *1
Size：78*78*4.8mm
Weight：60g
Normal charge: slow flash
Fast charg e: lo ng bright
FOD: fa st flash
Different application
Attention:
For charging efficiency, the thickness of
phone's case is suggested less than 2mm,
and over 5mm may lead to slow charging or
failure of charging
Do not use metal case.
Please keep the environment temperature in 0-45℃
The fast charge mode requires QC 2.0 adapter
Please keep the charger and receiver away from water and other liquid.
If cleaning the charger, please make sure the power is disconnected.
to charge, led indicator light on.
FCC Statement
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful I
nterference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio
TV technician for help
Caution: Any changes or modifications to this device not
explicitly approved by manufacturer could void your
authority to operate this equipment.