GW500 WirelessHomePhoneBaseStation User Manual Date:2019-07-18 Version:Draft
Contents 2.5 Manage Your Voicemail ............................................................. 6 2.6 Set Up a Conference Call ............................................................ 6 2.7 Use Call Waiting ......................................................................... 7 2.8 Forward Incoming Calls .............................................................. 7 2.9 Use TTY Mode ............................................................................ 7 2.
GW500 1. Getting Started 1.1 Know Your Device Your GW500 Wireless Home Phone Base Station lets you make calls with your wireless service provider’s cellular network. *For use by manufacturer.
GW500 1.3 Charge Your Battery 1.2 Install Your Battery 1. 1. 2. With the back cover facing upright, and slide your top hand down to Connect the adapter(included) to the power socket on the GW500. Do not force the connector into the power socket. Connect the charger to a standard AC power outlet. remove the back cover. 1.4 Status Indicators The indicator lights show the device’s status. Indicator Power 2.
GW500 Service with the 4 Bars lights Limited or no service, searching for off service, IMS registration failed. Network solid red with No SIM or SIM error 2. Using Your GW500 2.1 Power ON or OFF the 4 Bars lights off Network icon and 4Bars Signal strength indicator, weak to solid green strong signal • To power on your GW500, slide the Power Switch to the ON position. • To power OFF, slide the Power Switch to the OFF position. 1.
GW500 1. Pick up the handset of the connected home phone. Note: If your home phone(s) have volume controls, they are independent of 2. Dial the phone number. the GW500’s Volume Setting Mode. 3. Wait approximately 4 to 12 seconds for the call to be connected automatically. Note: You will need to dial 10 digits, even for local numbers. 2.5 Manage Your Voicemail Your GW500 can divert calls to the voicemail, so callers can leave voicemail Answer a Call messages when they cannot reach you.
GW500 3. When you hear a dial tone, dial the second number. 4. When you’re connected to the second party, press the 3 key and the Flash 2.8 Forward Incoming Calls (or Talk) key to complete the three-way connection. The call forwarding feature allows you to forward your incoming calls to 5. To end the conference call, hang up your home phone or return the phone another phone number, such as your mobile phone or office number. If you’ve receiver to its base.
GW500 2.10 Use Advanced Settings Command Description *955*3284# Reset your device to factory settings. *955*238*xx# Set the auto-dialing time. Replace xx with a number Standby Time Approximately 36 hours 4. Troubleshooting indicating the desired time in seconds, from 4 through 12. *955*866*xxx# *955*808*n# The default time is 4 s. Problem Suggested Solution Set your voicemail number.
GW500 5. Regulatory and Safety Information • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. RF Exposure FCC Compliance This device complies with FCC radiation exposure limits set forth for an This device complies with part 15 of the FCC Rules.
GW500 • Promptly dispose of used batteries in accordance with local regulations. • • Battery usage by children should be supervised. moisture at any time. Do not immerse the GW500 in any liquid. • Avoid dropping the device or battery. If the device or battery is dropped, • Do not allow the GW500 or accessories to come into contact with liquid or Do not place objects on top of the GW500.
GW500 • Do not take out your nano-SIM card unnecessarily. The nano-SIM card may be easily lost or can be damaged by static electricity. 6. Warranty warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law.