GPS Vehicle Tracker User Manual (G1C) This user manual has been specially designed to guide you through the functions and features of your GPS vehicle tracker.
Content 1. Products Components and Port Definition ................................................................3 1.1 Product Introduction ................................................................................................. 3 1.2 Product Configuration List ........................................................................................ 3 1.3 Device wiring diagram ...............................................................................................4 1.
1. Products Components and Port Definition 1.1 Product Introduction Name GPS Vehicle Tracker Type G1C Size 86*41*12 mm G1C Vehicle GPS Tracker is a practical and easy-to-use GPS tracker with small size and accurate location specially designed for vehicle tracking. It combines GPS+LBS communication technology. With EPO technology, this device can easily achieve extreme fast positioning. 1.
1.3 Device wiring diagram Yellow Relay Orange ACC Black GND Red Power 1.
Long bright GPRS online Not light Not yet received the GSM signal/not insert SIM card/GSM dormancy GPS Indicator (Yellow) Flash GPS signal in the search Long bright GPS has been positioning Not light GPS dormancy/not working 2. Specifications and functions 2.
2.2 Functions Functions Function details Description Tracking Real time tracking According to the stetted time update the Long and Lat information. Tracking Fix distance tracking Vibration alarm Collision alarm Vehicle status detection In static status, when ACC is off and static status is lasting for at least 1 minute, if vibration is exceed the threshold, it have alarm.
Harsh acceleration,brake, cornering Harsh acceleration: if acceleration value exceed the threshold in 1s, then generate alarm; Harsh brake: If acceleration value exceed the threshold in 1s, then generate alarm; Harsh cornering: If the angle and speed exceed the threshold for 2S, then generate alarm 7
2.3 Setup and Operation a) Unit Setup (1) Check unit Please check whether the equipment is in good appearance & whether accessories are completed. (2) Set In SIM Card Please press out the SIM card slot and put SIM card in. Please not put SIM card in or out when the equipment is connecting power. And please make sure the SIM card has data service. (3) Setup Position A.
b) SMS Command for Online Tracking Setup Command format is: Set IP online: SPGS: is Header P: Password (default password is: GSGPS) T: 120.076.068.123,7788 is TCP IP and Port Q: domain name and port A: CMNET is APN N: 13288888888 is Device ID printed on the device.
f) Command for Set Time zone The device is set to China time zone by default +8. When device upload the data to server it uses default time zone. In order to receive the data in UTC time please set the time zone to 0. Set Time zone: zone 0:00 Reply: zone 0 3. Common problem analysis and after-sales services 3.
3.2 Attention 1. Stay away from water 2. Please keep the car battery fully charged 3. Device working current is 6-90V, recommended 12V and 24V. Tracker will damage if the current is over this range. 4. Working temperature is -20 to 75 centigrade, please cut off power if the temperature is over this range. 5. When vehicle is in underground parks, tunnels or garage, maybe GPS signal will not very good. Communication network blind area will be caused and cannot monitor vehicle.
FCC Statement 1.This device complies with Part 22/24/27 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate the equipment.