G6S User Manual G6S User Manual V1.6 V1.6 Copyright © 2013 Gosafe ATTENTION! Do not disassemble the device. Do not touch before unplugging the power supply if the device is damaged, the power supply cables are not isolated or the isolation is damaged. All wireless data transferring devices produce interference that may affect other devices which are placed nearby. The device may be connected only by qualified individuals.
G6S User Manual The device must be firmly fastened in the predefined location. The device is susceptible to water and humidity. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
G6S User Manual must read these instructions carefully and follow the strictly before operating the device! The device uses a 8V-32V DC power supply. The nominal voltage is 12V DC. It is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible, which show what status of operation the device is in.
G6S User Manual G6S is designed for service providers, integrators, and enterprise customers to enhance mobile resources and improve their dispatch system; the G6S is a dependable quad-band GSM/GPRS tracking device, delivering the key features fulfilling the most demanding applications: fleet management, insurance telemetric, dispatch, vehicle location and recovery, and more.
G6S User Manual Contents ATTENTION! ........................................................................ 2 INSTRUCTIONS OF SAFETY .................................................. 3 LEGAL NOTICE ..................................................................... 4 INTRODUCTION .................................................................. 4 1. Packing List ..................................................................... 7 2. Specifications ...................................................
G6S User Manual 1.
G6S User Manual accessory NOTE: SIM card which for GSM/GPRS connectivity is not supplied in the package, please consult your local SIM provider for further information.
G6S User Manual 2. Specifications Dimension 80(L)x51.5(W)x26(H)mm Weight ~75g (With battery) Physical -40℃~+80℃ (without backup battery) Environment Operating temperature -10℃~+50℃ (with backup battery) ACC input 1 channel Digital input 2 channels Analog/Digital *2 channels Digital output 3 channels *1WIRE Maxim Integrated *RS232 serial link RxD & TxD Microphone 1 channel *Speaker SPK+ & SPK- USB Mini USB 2.
G6S User Manual 850/1900MHz Class 12 TCP/IP over PPP SIM card 1.8V & 3.3V Internal antenna 25*25 with amplifier External antenna GPS Active Antenna Model uBlox NEO 6M Channel 50 Parallel Channels Accuracy Autonomous<2.5M Sensitivity -162dBm Vibration sensor N/A Accelerate sensor Built-In, 2-axis 16Mbits Built-In, Maximum to save 8,000 GPS positions GPS Sensor Flash storage NOTE: * indicates only for G6S 3. Overview 3.1.
G6S User Manual GSM Jamming Detection Quad Band GSM Modem HDOP For Precise Location Multiple Data Upload Modes 2-Axis Accelerometer Sensor 156 Hardware Based Geo-Fence/Point of interest Over Speed Management Multiple Inputs & Outputs Configurable Inputs & Outputs Internal Backup Battery 11
G6S User Manual 3.2.
G6S User Manual Cover remove slot GPS external antenna connector 2*8/2*5 PIN I/O connector 4. Installation 4.1. Remove the cover 1, On the back panel of the device, there is a small slot at the top of it.
G6S User Manual 4.2. Insert the SIM card 1, Flip up cover of SIM holder, facing metal side of SIM card to the PCB board as step1. 2, Insert SIM card to cover then flip it down, pull the cover at the direction as step2 to lock up SIM card firmly. 4.3. Install direction ■G6S has accident & harsh detection features that based on built-in 2-axis sensor. Its accuracy will be affected by install direction of device, please find the sticker on housing of device for recommended direction.
G6S User Manual 1, By default you need to point side “0” to the engine, which is the direction of vehicle heading. 2, If you prefer other side pointing to engine, please send command to change the default setting of installation direction. E.g.: Side “1” is pointing to engine, Command to send: 1234,BDS;1 1234,BDS;1 Note: 1234 is the default user password to send command, and default is 1234,BDS;0 , and please set phone number as User number before sending this command.
G6S User Manual 5.
G6S User Manual 1 *Green/White RxD Receive serial link data 2 *Purple SPK+ Positive (+) of speaker 3 *White/Black TxD Transmit serial link data 4 *Orange/White Orange/White SPK- Negative (-) of speaker 5 *Yellow/Black 1WIRE 1WIRE link 6 *Blue/White AD2/IN4 Analog/Digital input channel 7 Grey MIC Microphone 8 Orange IN1 Digital input channel 1 9 Brown OUT3 Digital output channel 3 10 Red/Black IN2 Digital input channel 2 11 Yellow OUT2 Digital output channel 2 12
G6S User Manual GSM network unregistered: Flash 3 times quickly in a row every 3 seconds SIM card error: Flash 4 times quickly in a row every 3 seconds Serial link communication error: Flash 5 times quickly in a row every 3 seconds GSM module OFF: Never flash ■GPS GPS LED: Yellow GPS fixed: Flash once quickly every 3 seconds GPS unfixed: Flash twice quickly in a row every 3 seconds GPS communication error: Flash 3 times quickly in a row every 3 seconds GSM module OFF: Never flash ■Power Power LED: Red Usi
G6S User Manual User1’s command words are UNO0 UNO0, UPW0 UPW0, USP0 USP0. User2’s command words are UNO1, UPW1, USP1. USP1 Below will take user1 as example: To set your cell phone number as User1 to control and receive messages from device, please send UNO command to the device, e.g.: 1234,UNO0 1234,UNO0;+8613912345678 Or 1234,UNO0 1234,UNO0;13912345678 Explanations: 1234: 1234 Default password. UNO0 UNO0: Command control word for setting user number.
G6S User Manual 1234: 1234 Factory Password UPW0: UPW0 Command control word for setting new password 5678: 5678 New Password ■Set position report interval to user phone Device is able to report its current position periodically according to the setting, default is every 30 minutes. To change it please send USP command, e.g.
G6S User Manual G: GPS location information as first priority, if it is invalid, will be replaced by LBS information. S: Using LBS information only. L: Device will voice call USER periodically for voice monitoring purpose. W: Location information type T: Text for current location, showing GPS coordinate. W: Google map hyper link for current location.
G6S User Manual 8. Message Explanation ■Periodical SMS report Below are the different kinds of message will be received by user periodically according to the setting of command USP, example on G6S. “W” mode 1. GPS is fixed Content of message Explanation G6S V1.00 Device name/Firmware version LTM 2013-06-06 14:17:12 Date/Time http://maps.google.com/maps?q... Google map hyper link GSM -52dBm GSM network signal strength EXT_PWR=12.08V External power voltage BAT=3.
G6S User Manual There are 2 kinds of map hyper link available, static and dynamic, it depends on the setting of command USP, e.g.: Static link: http://maps.google.com/staticmap?zoom=14&size=300x300&markers =%n(,%e&sensor=false Dynamic link: URL0;http://maps.google.com/maps?q=%n(,%e&t=m&z=16 2. GPS is not fixed Map hyper link will be LBS (URL1) instead of GPS (URL0) Content of message Explanation G6S V1.00 Device name/Firmware version LTM 2013-06-06 14:17:12 Date/Time http://maps.google.com/maps?q.
G6S User Manual “T” mode 1. GPS is fixed Content of message Explanation G6S V1.00 Device name/Firmware version LTM 2013-06-06 09:41:22 Date/Time GPS 1.55/0.50/3/4 HDOP/ALTITUDE in meter/Fixed satellite number/Time of first fixed N23.164302 N means north/S means south E113.428456 E means east/W means west SPD:0km/h 0 Speed/Heading GSM -52dBm GSM signal strength EXT_PWR=12.13V External power voltage BAT=3.96V Built-in battery voltage #27 Consumed messages 2.
G6S User Manual G6S V1.00 Device name/Firmware version LTM 2013-02-28 23:51:09 Date/Time MCC/MNC/LAC/CID/RSSI Base station information type 460/0/2503/962C/-53dBm Main station, MNC/MNC/Local area code/Station ID/Signal strength 460/0/2731/40F4/-60dBm Neighbor station 1 460/0/2703/4050/-70dBm Neighbor station 2 GSM -58dB GSM network signal strength EXT_PWR=5.13V External power voltage BAT=4.
G6S User Manual BAT=3.86V Built-in battery voltage #301 Consumed messages 3. GPS is not fixed Map hyper link will be LBS (URL1) instead of GPS Content of message Explanation G6S V1.00 Device name/Firmware version LTM 2013-06-06 14:17:12 Date/Time http://maps.google.com/maps?q... Google map hyper link ETD:6/ACC ON Event ID/User defined event name/Data GSM -52dBm GSM network signal strength EXT_PWR=12.08V External power voltage BAT=3.
G6S User Manual G6S V1.00 Device name/Firmware version LTM 2013-02-28 23:51:09 Date/Time GPS 1.55/0.50/3/4 HDOP/ALTITUDE in meter/Fixed satellite number/Time of first fixed N23.164302 N means north/S means south E113.428456 E means east/W means west SPD:0km/h 0 Speed/Heading ETD:6/ACC ON Event ID/User defined event name/Data GSM -52dBm GSM network signal strength EXT_PWR=12.13V External power voltage BAT=3.96V Built-in battery voltage #28 Consumed messages 2.
G6S User Manual EXT_PWR=12.13V External power voltage BAT=3.96V Built-in battery voltage #28 Consumed messages Appendix Optional accessory ■USB cable To the computer that To the front panel runs configuration tool of device ■GPS external antenna Item Antenna Parameter Center Frequency 1575.42±1MHz Band Width CF±5MHz Polarization RHCP Gain 5dBic(Zenith) V.S.W.R <1.
G6S User Manual LNA Mechanical Environmental Impendence 50Ω Axial Ratio 3dB(max) Dimension 25*25*300cm Gain 28±2dB Noise Figure <1.5 Filter Insertion Loss <3dB Ex-band Attenuation 12dB@CF+50MHz/16dB@CF-50MHz Supply Voltage 2.2~5V DC Current Consumption 5~15mA V.S.W.R <2.0 Cable RG174---3M Connector SMA Redone Material ABS Mounting Method Magnet Operating Temperature -40℃~+85℃ Relative Humidity Up to 95% Ingress Protection IP65~IP67 Vibration 10 to 55Hz with 1.
G6S User Manual ■Microphone Item Parameter Length 3 meters Material Al-Si Output impedance 2.2Kohm Sensitivity -30db to 60db Frequency 50HZ to1600HZ Channel Stereo PIN15 Black wire: To PIN15 This accessory is necessary PIN7 Red wire: To PIN7 for voice related functionalities.
G6S User Manual Power consumption 1W PIN16 Red: To PIN16 This accessory is PIN15 Black: To PIN15 necessary for voice PIN4 White: To PIN4 related functionalities.
G6S User Manual PIN8/10 Black/White wire: To PIN8/10 Press button to send PIN15 Black wire: To PIN15 SOS message/call from G6S ■Fuse This accessory protects the device when illegal power supply has been connected.
G6S User Manual PIN16 Power cable: PIN15 Black: To PIN15 PIN3 Red: To PIN16 To GARMIN PND PIN1 Data cable: Brown: To PIN15 White: To PIN3 Yellow: To PIN1 ■Immobilizer Immobilizer is an electronic security device fitted to an automobile that prevents the engine from running, it can be control by digital output channel from G6S PIN9/11/13 85: To +12V/24V 86: To PIN9/11/13 87a & 30: Between ignition wire 33
G6S User Manual FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
G6S User Manual -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.