INSTRUCTIONS FOR USE WINE CLIMATE CABINET EN WCN111942G
Contents Introduction ................................................ 3 Welcome to our growing ASKO family! ....... 3 Safety instructions ..................................... 4 Safety of children and vulnerable people ..... 4 General safety .............................................. 4 FCC (Federal Communications Commission) Informations: ................................................ 6 Installation .................................................... 7 Electrical connection .........................
Introduction Welcome to our growing ASKO family! We are proud of our appliances. We hope that this appliance will be an appreciated and dependable aid for many years to come. Please read the operating instructions before use. They include general tips, information about the settings and adjustments you can make, and the best way to take care of your appliance.
Safety instructions Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. WARNING! If the appliance is installed at an altitude of over 3280 ft (1000 m) above sea level, there is a danger of glass cracking due to air pressure. In such case, glass fragments could cause injury.
Safety instructions - staff kitchen areas in shops, offices and other working environments; - farm houses and by clients in hotels, motels and other residential type environments; - catering and similar non-retail applications. WARNING! Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
Safety instructions FCC (Federal Communications Commission) Informations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This device complies with part 15 of the FCC Rules.
Safety instructions • This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Installation • Remove all the packaging.
Safety instructions ELECTRIC SHOCK! WARNING! When positioning the appliance, ensure the supply cord is not trapped or damaged. Electrical connection ELECTRIC SHOCK! WARNING! Risk of fire and electrical shock. • The appliance must be earthed. • All electrical connections should be made by a qualified electrician. • Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician. • Always use a correctly installed shockproof socket.
Safety instructions Use WARNING! Risk of injury, burns, electrical shock or fire. • Do not change the specification of this appliance. • Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer. • Be careful not to cause damage to the refrigerant circuit. It contains isobutene (R600a), a natural gas with a high level of environmental compatibility. This gas is flammable.
Safety instructions Disposal WARNING! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. • Remove the door to prevent children and pets to be closed inside of the appliance. • The refrigerant circuit and the insulation materials of this appliance are ozone friendly. • The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
Installation and connection Selecting the location Place the appliance in a dry and well aired room. The permitted ambient temperature range for the appliance depends on the appliance’s climate class, which is shown on the type plate.
Installation and connection Appliance placement Appliance installation should be carried out by at least two persons, in order to avoid damage to the appliance and physical injury of anyone involved. When moving the appliance, be careful not to push it on the floor because of potential damages. There are two casters on the back of the appliance housing, that make moving the appliance around easier.
min115/16" 50 mm 115/16" 50 mm Installation and connection Place the appliance at least 1 15/16" (50 mm) away from an electric or gas stove, and at least 11 13/16" (300 mm) away from a heat source (e.g. a radiator or a heater). If such clearance is not possible, then install an insulation panel. • Do not expose the appliance to direct sunlight. • We recommend free-standing installation of the appliance.
Installation and connection 313/8" • The appliance comes supplied with two spacers that should be fitted in the slots on the back of the appliance, one on either side, near the bottom. The spacers ensure adequate air circulation that is required for correct appliance operation. The appliance will operate normally without the spacers in place; however, this could affect its power consumption. • Appliance dimensions are shown on the drawing.
Installation and connection Connecting the appliance • Connect the appliance to the power supply with a plug. The socket must be earthed. The nominal voltage and frequency required for the appliance are shown on the appliance’s type plate/label with basic information. • The appliance must be connected to the mains and earthed in accordance with the prevailing standards and regulations. The appliance can withstand small variations in the mains voltage to a maximum of plus or minus 6%.
Before using the appliance for the first time Before you use the appliance for the first time Do not connect the appliance to the mains until you have carefully read the instructions for the correct and safe use of the appliance. We recommend that you keep these instructions for future use. If you sell the appliance, enclose them with the appliance. Inspect the appliance for damage and/or irregularities. If the appliance is damaged, contact the store that sold you the appliance.
Storing wine Wine storage tips Natural wine cellars are the ideal place to store wine, because of the scarce light, the lack of vibrations and having a special climate. A wine’s temperature determines its flavour, and influences enjoyment. Wine ageing depends on the environment conditions in which the wine is stored. By maintaining constant optimum temperature, correct air humidity, and an atmosphere free from any odours, the wine climate cabinet provides excellent conditions for storing your wine.
Storing wine Storing bottles • Moving the bottles or excessive vibration can have a negative effect on the aging process and thus on the wine’s flavour. The appliance is fitted with a special sensor that continuously measures vibration. In case of excessive vibration, e.g. when the appliance door is slammed shut, an alarm signal will sound and alarm key will flash on the display. • Keep the bottles intended for daily use on the front half of the shelves.
Description of the appliance This product contains a light source of energy efficiency class . 2 3 1 4 5 6 1. Control panel 2. Proximity sensor 3. Door sensor 4. LED illumination 5. Charcoal filter 6. Wooden bottle shelf 7. Chalkboard name tag 8. Wooden bottom bottle rack 7 9. 3-layered glass door with UV filter 8 9 Control panel (1) By pressing the keys on display unit, you can control the operation of the wine climate cabinet and set certain functions according to your preferences.
Description of the appliance Door sensor (3) When you open or close the appliance door, light will change according to your preferences. They can be set in SETTINGS MENU. • Door open: light change to (no change, ambient mode or functional mode) • Door closed: light change to (no change, ambient mode or functional mode) Door sensor error is detected, when door open time reaches 10 minutes. In that case light is turned off. LED illumination (4) LED illumination is installed on the appliance ceiling.
Description of the appliance To replace the air filter: 1. Rotate the filter in the anti-clockwise direction (1) and pull it out from the appliance. 1 2. Insert a new filter into the filter slot and rotate it clockwise until it clicks into place. 2 INFORMATION! Charcoal air filter can be ordered as accessory. For more informations refer to the local Asko dealer or to the Asko website of your country.
Description of the appliance The shelf can also be partly pulled out from the appliance. The blocks on the plastic shelf supports protect the shelf from being fully extended and pulled out, which could result in the shelf falling from the appliance. INFORMATION! Before you start adding bottles to a shelf, check once more whether the shelf is correctly placed on the plastic holders. Up to 13 Bordeaux bottles (25.4 fl oz (0.75 l)) can be placed on each standard wooden bottle shelf.
Description of the appliance Wooden bottom bottle rack (8) The wooden bottom bottle rack is intended for storing the bottles in the compressor area. This area is suitable for storing bottles you wish to keep for a longer period of time, especially for ageing without excessive vibration and unnecessary movement. Up to 27 Bordeaux bottles (25.4 fl oz (0.75 l)) can be stored on the wooden bottom bottle rack.
Description of the appliance You can also buy additional HumidityBoxes when needed. Please do not put the HumidityBox in the dishwasher, as this type of material is not dishwasher safe. Because of the relatively thin walls, the box is fragile and should be handled carefully. Occasionally, shower the inside of the box with tap water. INFORMATION! For more informations refer to the local Asko dealer or to the Asko website of your country.
Operation Display 01 01 09 ’T’ 02 03 ’H’ 04 05 06 07 08 On/Off key: • a long press (2 seconds) to switch the appliance on or off • a short press to switch the appliance to or from Standby 02 Key lock key – to lock or unlock the user interface (3 seconds press) 03 Temperature arrows: • to increase or decrease the set temperature • to toggle through menu options inside SETTINGS MENU 04 Settings key – to go to SETTINGS MENU 05 Value arrows – to select preferred setting or value inside SET
Operation Keylights intensity depends on the availability of the certain function: Keylight intensity with door closed or opened Function not available 0% Function available 60% Function activated or to be activated 100% First plug-in INFORMATION! When the appliance is plugged in for the first time or after the appliance was disconnected from the mains for a longer period of time it is mandatory to wait four hours until the appliance can be activated.
Operation Temperature setting Default setpoint temperature of the appliance is 54°F (12°C). This temperature can be changed instantly in Status display, after the appliance is switched on. Temperature of the appliance compartment can be set between: 41°F and 68°F (5°C and 20°C). By pressing on the arrow keys, setpoint temperature on display 'T' changes. With every press, setpoint temperature will change 1°C up or down.
Operation • automatically, after a certain time of inactivity. It can be set in SETTINGS MENU. Status display: Key lock key active, door open If you press on any other key, Key lock key will blink fast, 2 times. Press on any other key is ignored. Exeption: In case that any of the alarms is triggered, short press on alarm key alarm. will cancel the Key lock mode deactivation: • with a 3 seconds press on Key lock key .
Operation Humidity Humidity can be (de)activated in SETTINGS MENU. If it is set to 'OF', then humidity is no longer being monitored (not in the appliance and not in the mobile app). Display 'H' does not show any value and automatically humidity alarm and humidity box refill notification are disabled. Humidity alarm sounds when 7 days average value of compartment humidity falls below 40% or rises above 80%, for 7 days constantly. The alarm key is illuminated and alarm sound is heard.
Operation Humidity box notification The appliance can notify you when humidity box needs to be refilled. Humidity box notification starts when 7 days average value of compartment humidity is between 40% - 50% for 7 days constantly. So you do not have to remember to check it yourself and can also help avoid triggering the humidity alarm. The alarm key heard. and humidity value are blinking softly . No alarm sound is Humidity box notification can be (de)activated in SETTINGS MENU.
Operation Vibrations notification If light vibrations are detected, light vibrations alarm is triggered. 'UA' display 'T'. is blinking softly on Vibration has been noticed. Please close the door gently and pull-out /close the shelves gently, making use of the soft close mechanism. Frequent vibrations can influence the quality of the wine on longer term. Vibrations alarm If heavy vibrations are detected, heavy vibrations alarm is triggered. 'UA' on display 'T'. Alarm key is is blinking rapidly blinking.
Operation Stopping the alarm: Short press on alarm key will stop 'PF' blinking. After that, current measured temperature and current humidity value will be shown on displays 'T' and 'H'. If you press on alarm key again, alarm will be canceled. Compartment setpoint temperature and humidity level will be shown on displays 'T' and 'H'. INFORMATION! When Power outage high temperature alarm is canceled, Temperature alarm can be still active. In that case, alarm behaves like Temperature alarm.
Operation The humidity display 'H' will be used to represent the settings and values that can be selected. It differs per menu option how many or what kind of settings there are possible. Arrows can be used to toggle through MENU options. Arrows can be used to select the preferred setting or value. Example We will use the first option in SETTINGS MENU as an example: First 'A' is representing MENU option Group: GENERAL. Second 'A' is representing Menu option: Temperature unit.
Operation INFORMATION! If SETTINGS MENU is active, the alarm indications (audio and visual), error notifications and Charcoal filter notifications are not active, they will be activated as soon as SETTINGS MENU is closed. SETTINGS MENU is not activated again when, after failure, power is restored or when appliance goes back from Appliance-Off to Appliance-On. In case of power failure, after power is restored, your settinngs will be set to values before power was disconnected.
Operation SETTINGS MENU table Temperature unit Select temperature unit: from °C to °F Time hours Select the hours of time: from 00 to 23 hours Time minutes Select the minutes of time: from 00 to 59 minutes GENERAL Date day Select the day: from 01 to 31 days Date month Select the month: from 01 to 12 months Date year Select the year: from 00 up to 99 35
Operation General sounds Select the preferred volume: from 0 to 5 SOUNDS Alarm sounds Select the preferred volume: from 0 to 5 Key sounds Select the preferred volume: from 0 to 5 Time of inactivity after which display goes to standby: 1 minute 5 minutes DISPLAY Standby time 15 minutes 30 minutes 60 minutes 12 hours 36
Operation Explanation about the light modes can be found in chapter "LED illumination".
Operation Functional mode Kelvin Select the first two digits of the Kelvin value: from 2700 to 5000 Kelvin Functional mode Intensity Select the light intensity: from 0 to 99 How long will the cabinet be lit in Functional mode: 1 minute LIGHTS 5 minutes ON for 15 minutes 30 minutes 60 minutes 90 minutes always 38
Operation Proximity sensor can be (de)activated: Proximity sensor Proximity sensor on Proximity sensor off If Proximity sensor is set to 'On', associated settings will become available.
Operation Night mode will dim the light during a set time. Night mode status Night mode can be (de)activated: On or Off If Night mode is set to 'On', associated settings will become available.
Operation WLAN can be (de)activated: WLAN Status WLAN on WLAN off NETWORK CONNECTION Switch on the appliance Wireless Network to use the appliance optimally in combination with our ConnectLife application. Explanation about the Connection Setup can be found in chapter “Connection setup”. Connection setup can be activated: Connection Setup Connection setup on, press to confirm Both will be blinking during setup The setup ends automatically if connection was succesfull or after 3 minutes.
Operation Appliance Pairing can be activated: Appliance Pairing Appliance pairing on, press to confirm Both will be blinking during pairing The process ends automatcially if pairing was succesfull or after 3 minutes. Appliance can be paired to (additional) user account. Refer to the applicaton for further instructions.
Operation Key lock automatically activate it after: 5 minutes Key lock mode 15 minutes 30 minutes 60 minutes SYSTEM never Humidity can be (de)activated: Humidity Humidity alarm on Humidity alarm off If Humidity is set to 'On', associated settings will become available.
Operation Explanation about the charcoal filter can be found in chapter "Charcoal filter countdown and notification". Charcoal filter lifetime in days: Charcoal filter countdown SYSTEM First digit of 3 digit number Second and third digit of 3 digit number Charcoal filter lifetime is 365 days. Countdown will show the number of days left until the countdown. If a 'minus' is in front of first digit, amount is showing days after expiration date.
Operation Set the number of days ahead of the end of the countdown, when you wish to receive a notification: no notification on the day itself Charcoal filter notification 1 day in advance 7 days in advance 15 days in advance SYSTEM 30 days in advance Appliance can be reset to the factory settings: Factory RESET RESET, press Are you sure? If YES, press to confirm to confirm If you confirm RESET all personal settings and stored data will be lost.
Operation Explanation about the Sabbath mode can be found in the chapter "Sabbath mode". Sabbath mode can be (de)activated: Sabbath mode* Sabbath mode on, press to confirm Sabbath mode off, press to confirm Appliance will continue to operate, while extra functions like light, display, sounds, alarms and proximity- and door sensor will be disabled for 72 hours. To disable Sabbath mode, press SYSTEM for 3 seconds. Explanation about the ECO mode can be found in chapter "ECO mode".
Operation switch control among others. Temperature and humidity values are mirrored at real time. Temperature in the compartment can be changed in the app too, so the door can remain closed. 1. Mobile app First, download the mobile application with your smart device and create a user account. It is available on Google Play, App Store and AppGallery. 2. Wi-Fi modul activation: • directly, with a 2 seconds press on Wi-Fi key • . or go to WLAN STATUS inside NETWORK CONNECTION inside SETTINGS MENU.
Operation 6. Unpair all By triggering this option appliance removes all paired user accounts. Data and saved settings remain the same inside the appliance. Unpairing function ends automatically if the unpairing process on the cloud is successful or if after 1 minute the unpairing has not been successful on the cloud. 7.
Operation • automatically 72 hours after activation, • with a 3 seconds press on Key lock key . If any error occurs during Sabbath mode, it won't be showed until Sabbath mode is deactivated. * Active Sabbath mode overrules ECO mode and Night mode for a maximum of 72 hours. Eco mode During ECO mode, the appliance internal illumination and display illumination are adjusted for best energy consumption. ECO mode is activated after 5 minutes of inactivity on Appliance's Display. Only On/Off key active.
Maintenance Defrosting the appliance • The wine climate cabinet is defrosted automatically. Drops of water will flow through an opening in the rear wall into a tray fitted above the compressor, from where they will evaporate. Cleaning the appliance WARNING! Switch off the appliance and remove the plug from the socket before you start cleaning it. WARNING! Do not use abrasive cleaning agents, as they can damage the surface. WARNING! Do not remove the rating plate located inside the appliance.
Reversing the door opening direction The direction in which the appliance door opens can be reversed. In order to safely reverse the door opening direction, at least three people should carry out the procedure described below. The door weighs about 88 lb (40 kg).. WARNING! In order to avoid damaging the floor, use a floor mat or other suitable protection on the floor in front of the appliance. Also, plan for a suitable spot where you will temporarily place the door during the procedure.
Reversing the door opening direction To reverse the door opening direction, proceed as follows: 52 3 1 6 1 1. Open the appliance door. 2. Remove the two hinge caps (1) at the top and bottom. Set them aside, as you will need them later on. 3. Partly (by no more than 5 mm) undo the hinge screws (2) at the top and bottom. Do not completely undo the screws. This way, the door will remain in contact with the housing.
Reversing the door opening direction 4. Remove the door, complete with the hinges, by moving it in the direction indicated by the arrow. Carefully place the door on the surface prepared for this purpose. 5. Remove the cap (3). Save it (e.g. in the bag with the instruction manual) if you ever decide to reverse the door opening direction back to the original setting. 6 Undo the screw (4) and remove the cap (5). Set them aside, as you will need them later on.
Reversing the door opening direction 54 7. Remove the cap (6) and discard into the bin for plastic waste. 8. Completely undo the screws (2). Then, partly screw them into the holes at the top and bottom on the opposite side of the housing. 9. Carefully rotate the door by 180 degrees.
Reversing the door opening direction 10. Hang the door onto the screws (2) at the top and bottom and slide it in the direction indicated by the arrow (a). 11. Tighten the screws. The screws should be tightened to a torque of 6.2 Nm. 12. Replace the hinge caps (1).
Reversing the door opening direction 13. On the opposite side from the top hinge, attach the cap (5) using the screw (4). 14. Take the caps (7 and 8) from the bag with the instruction manual and install them on the side opposite from the hinges. 15. Close the door and make sure it is aligned with the housing. The housing side and the edge of the door should be parallel.
Reversing the door opening direction α If the door is not aligned with the housing (the angle α is not 0°), then proceed as follows: 1. Open the door and detach the gasket from its groove in the corners at the top and bottom hinge. 2. Release the screws (1) at the top and bottom. Do not undo them completely! 3. Close the door, then rotate the screw (2) at the top and bottom to adjust the door position.
Reversing the door opening direction 58 4. Adjust the door position until the edge of the door is parallel to the side of the housing. 5. When the door edge is parallel to the housing side, open the door again and tighten the screws (1) you released at the start of the door adjustment process. 6. Carefully press the gasket back into the groove in the door.
Solving problems If you have any doubts about whether your appliance is working properly, we recommend to first read suggestions below. Tips & Tricks When temperature or humidity in the appliance is out of range an alarm will be triggered. Alarm sounds and alarm key is blinking on display. To remove the sound, short press alarm key . The temperature or humidity will be blinking on the display until it has been recovered.
Solving problems Humidity out of range Possible cause Countermeasures Frequent and/or long door openings. Try to minimize opening the door of the wine climate cabinet appliance. Prepare loading plan of large quantities of bottles in advance to minimize the required time for loading. Try to use the ConnectLife mobile application as much as possible to change appliance settings. Recent big changes in temperature settings.
Solving problems Error notifications If a component inside the appliance is failing, a notification will pop-up. The notification will display a code. Codes for these errors can be found in the table below. Error Description Code Code shown on Code shown on Display 'T' Display 'H' E0 Communication error from power board to user interface electronics. E0 E0 E1 Wi-Fi module can not turn on. E 1 E4 Wi-Fi module can not connect to Cloud Service. E 4 E5 'Hard Pairing' process not successful.
Solving problems The exception is error P1 (Proximity sensor), where the user can choose not to display this error anymore. Error itself can not be disabled. General problems Problem Cause/Solution Appliance cools continuously • for a long time. • Appliance makes a noise. LED light is not working. 62 The ambient temperature is too high. The door has been opened for too long or too frequently. • The door does not seal properly (the seal is dirty, the door is misaligned or the seal is damaged, etc.).
Solving problems Other display warnings Warning Cause/Solution The door is open: • The door has been open too long: close the door. • If the warning keeps showing, call the service center to arrange repairs. The appliance operates in a safe mode until it is corrected. The appliance automatically maintains the most suitable temperature. The humidity is out of range: The value of humidity in the compartment is outside the permitted limits.
Solving problems INFORMATION! When calling a service center, you will have to state the type, model and serial number indicated on the type plate on the inside of the appliance [see chapter “Selecting the location”]. When waiting for a service technician, do not open the appliance door to avoid an unnecessary rise in temperature.
Environmental aspects Disposal of packaging and appliance This appliance is made from sustainable materials. This appliance must be disposed of in a responsible manner at the end of its service life. Contact the local authorities for information about the method. INFORMATION! See also the chapter ‘Disposal’ in the Safety instructions. The packaging of the appliance is recyclable. The following materials may have been used: • Cardboard. • Polyethylene foil (PE). • CFC-free polystyrene (hard PS foam).
Service and warranty Limited Warranty – Residential Appliances This Limited Warranty covers parts and labor, except as set forth in this Limited Warranty. Service must be providedby an authorized ASKO service company. YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. This Limited Warranty is valid only when the ASKO Product is used in the country in which it was purchased.
Service and warranty warranty rights.This Limited Warranty gives you specific legal rights and you may have other rights that vary from jurisdiction to jurisdiction. Attempted repair by any person other than an authorized ASKO service company will void this Limited Warranty. Limitation of liability IN NO EVENT SHALL ASKO OR THE MANUFACTURER AND THEIR RESPECTIVE PARENTS, SUBSIDIARIES AND AFFILIATES BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR SPECIAL DAMAGES.
US.ASKO.COM • CA.ASKO.COM • ASKO.