INSTRUCTIONS FOR USE WINE CLIMATE CABINET EN WCN311942G
Contents Introduction ................................................ 3 Welcome to our growing ASKO family! ....... 3 Safety instructions ..................................... 4 Safety of children and vulnerable people ..... 4 General safety .............................................. 5 FCC (Federal Communications Commission) Informations: ................................................ 6 Installation .................................................... 7 Electrical connection .........................
Introduction Welcome to our growing ASKO family! We are proud of our appliances. We hope that this appliance will be an appreciated and dependable aid for many years to come. Please read the operating instructions before use. They include general tips, information about the settings and adjustments you can make, and the best way to take care of your appliance.
Safety instructions Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. WARNING! If the appliance is installed at an altitude of over 3280 ft (1000 m) above sea level, there is a danger of glass cracking due to air pressure. In such case, glass fragments could cause injury.
Safety instructions General safety • Illumination in the appliance is only suitable for illumination of this appliance and not for household room illumination. • WARNING! This appliance is intended to be used in household and similar applications such as: - staff kitchen areas in shops, offices and other working environments; - farm houses and by clients in hotels, motels and other residential type environments; - catering and similar non-retail applications.
Safety instructions FCC (Federal Communications Commission) Informations: • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Safety instructions • This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Installation • Remove all the packaging. • Do not install or use a damaged appliance. • Obey the installation instruction supplied with the appliance. • Always be careful when you move the appliance because it is heavy. Always wear safety gloves. • When tilting the appliance, make sure the door does not touch the floor.
Safety instructions Electrical connection ELECTRIC SHOCK! WARNING! Risk of fire and electrical shock. • The appliance must be earthed. • All electrical connections should be made by a qualified electrician. • Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician. • Always use a correctly installed shockproof socket. • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the electrical components (e.g.
Safety instructions • Be careful not to cause damage to the refrigerant circuit. It contains isobutene (R600a), a natural gas with a high level of environmental compatibility. This gas is flammable. • If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room. • Do not let hot items to touch the plastic parts of the appliance. • Do not store flammable gas and liquid in the appliance.
Safety instructions Disposal WARNING! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. • Remove the door to prevent children and pets to be closed inside of the appliance. • The refrigerant circuit and the insulation materials of this appliance are ozone friendly. • The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
Installation and connection Selecting the location Place the appliance in a dry and well aired room. The permitted ambient temperature range for the appliance depends on the appliance’s climate class, which is shown on the type plate.
Installation and connection Appliance placement Appliance installation should be carried out by at least two persons, in order to avoid damage to the appliance and physical injury of anyone involved. When moving the appliance, be careful not to push it on the floor because of potential damages. There are two casters on the back of the appliance housing, that make moving the appliance around easier.
Installation and connection When the appliance is placed on the intended surface, it should be completely level in order to decrease vibration. To level the appliance, use the adjustable feet at the front of the appliance. An open wrench size 17 is required for adjusting and fastening the feet. • Place the appliance at least 1 15/16" (50 mm) away from an electric or gas stove, and at least 11 13/16" (300 mm) away from a heat source (e.g. a radiator or a heater).
Installation and connection 14 • To allow for adequate ventilation and cooling of the appliance, there has to be sufficient clearence behind the appliance and on both sides as well (at least 1 15/16" (50 mm)). Please, also observe the clearance required to fully open the door in order to allow pulling out the drawers and shelves (see installation diagram).
Installation and connection • Appliance dimensions are shown on the drawing. • If the appliance is placed in a way that does not allow the door to be opened to the 115° angle, the opening angle can also be restricted to 90°. In this case, use the door restrictors (A) supplied in the bag containing the instruction manual. Carefully open the door to an angle less than 90° and insert the restrictor into the provided opening in the lower hinge. Repeat the same process for the upper hinge.
Installation and connection Connecting the appliance • Connect the appliance to the power supply with a plug. The socket must be earthed. The nominal voltage and frequency required for the appliance are shown on the appliance’s type plate/label with basic information. • The appliance must be connected to the mains and earthed in accordance with the prevailing standards and regulations. The appliance can withstand small variations in the mains voltage to a maximum of plus or minus 6%.
Before using the appliance for the first time Before you use the appliance for the first time Do not connect the appliance to the mains until you have carefully read the instructions for the correct and safe use of the appliance. We recommend that you keep these instructions for future use. If you sell the appliance, enclose them with the appliance. Inspect the appliance for damage and/or irregularities. If the appliance is damaged, contact the store that sold you the appliance.
Storing wine Wine storage tips Natural wine cellars are the ideal place to store wine, because of the scarce light, the lack of vibrations and having a special climate. A wine’s temperature determines its flavour, and influences enjoyment. Wine ageing depends on the environment conditions in which the wine is stored. By maintaining constant optimum temperature, correct air humidity, and an atmosphere free from any odours, the wine climate cabinet provides excellent conditions for storing your wine.
Storing wine Storing bottles • Moving the bottles or excessive vibration can have a negative effect on the ageing process and thus on the wine’s flavour. The appliance is fitted with a special sensor that continuously measures vibration. In case of excessive vibration, e.g. when the appliance door is slammed shut, a warning will appear on the appliance display unit. • Keep the bottles intended for daily use on the front half of the shelves.
Description of the appliance This product contains a light source of energy efficiency class . 1. LED shelf illumination (in all three temperature zones) 2. Standard wooden bottle shelf 3. Chalkboard name tag 4. Wooden bottle shelf with moon shaped recesses 5. Top insulation barrier 6. Touch screen TFT display 7. Scan camera 8. Wooden wine glass hanger (right + left) 9. RGB illumination 10. Charcoal filter (in all three temperature zones) 11. Serving tray 12.
Description of the appliance INFORMATION! Make sure the door is fully open before removing the shelves. This will prevent any damage to the door gasket. INFORMATION! Be careful when pulling out the wooden shelves. Carefully pull out and push back the wooden shelves in order not to expose the wine bottles to vibration. To remove a shelf from the appliance, fully extend the telescopic rails (1), and then vertically lift the shelf (2) to remove it from the rails. Take care not to damage the door gasket.
Description of the appliance Wooden bottle shelf with moon shaped recesses (4) The wooden bottle shelf with moon shaped recesses allows you to load the bottles onto the shelf cross-wise. This is particularly convenient for storing larger bottles. In some cases, during opening/closing of the shelf, bottles are not properly positioned or stopped and they can move. To prevent movement of the bottles on the shelf, it is recommended to use the accessory 'bottle stopper' (a) included in the appliance equipment.
Description of the appliance Up to 10 bottles can be stored on a shelf cross-wise. Normal positioning of the bottles is also possible. The wooden bottle shelf with moon shaped recesses can be removed from the appliance in the same way as the standard wooden bottle shelf. Top insulation barrier (5) The top insulation barrier separates zones A and B and allows individual temperature settings for these two zones.
Description of the appliance Zone B - serving area The serving area (zone B) is a temperature zone between the top (5) and bottom (15) insulation barrier. It allows you to bring the wine on ideal consumption temperature, and to prepare in advance everything you need for quick and top-notch wine serving: chilled wine glasses, space for already open bottles, decanter, and other accessories (bottle openers, wine pourers/spouts, stoppers ...).
Description of the appliance Inclination serving bottle shelf (13) is installed on the full-extension telescopic rails with soft close and it is secured against tipping over. A serving tray is placed on the front part of the serving shelf, and the vertical bottle holder is inserted into the shelf’s rear part. The tray and the bottle holder can be lifted and removed from the support shelf (for serving purposes outside the Wine Climate Cabinet, maintenance or cleaning).
Description of the appliance An accessory drawer with wooden dividers (14) is installed on extendible rails underneath the serving shelf. Inclination serving bottle shelf can be removed from the appliance along with the accessory drawer. Take care not to damage the door gasket. Pull out the shelf from the appliance as far as possible. Then, lift it at the front side (1), pull forward (2) and lift at the back (3).
Description of the appliance Accessory drawer (14) is installed on the full-extension telescopic rails. It uses the push-to-open mechanism for opening. Press on the closed drawer to fully open it. To close the drawer, press again on its front side. Wooden dividers in the drawer can be inserted into the grooves to fit the accessories you are storing (bottle opener, pourer/spout, wine stoppers etc.). The drawer can also be removed from the appliance without removing the serving bottle shelf from its rails.
Description of the appliance If the shelf (13) and drawer (14) are not aligned at the front (d≠0), first completely pull out the drawer to access the drawer opening mechanism on the back wall. Press on the spacer (A) to release the mechanism. Rotate the spacer to adjust the length. Situation "a": rotate the spacer in anti-clockwise direction (1). Compared to the initial state, the spacer moves outward relative to the drawer, i.e. it is extended.
Description of the appliance INFORMATION! Charcoal air filter can be ordered as accessory. For more informations refer to the local Asko dealer or to the Asko website of your country. Humidity box One HumidityBox is supplied with the wine climate cabinet. The purpose of the HumidityBox is to adjust the humidity in one of the zones of the wine climate cabinet, specifically to prevent humidity from dropping to below 50%, which could appear in certain conditions (e.g.
Description of the appliance Please do not put the HumidityBox in the dishwasher, as this type of material is not dishwasher safe. Because of the relatively thin walls, the box is fragile and should be handled carefully. Occasionally, shower the inside of the box with tap water. INFORMATION! For more informations refer to the local Asko dealer or to the Asko website of your country.
Description of the appliance Zone C Bottom insulation barrier (15) The bottom insulation barrier separates zones B and C and allows individual temperature settings for these two zones. Functional LED illumination is installed on the bottom side of the barrier. Wooden bottom bottle rack (16) The wooden bottom bottle rack is intended for storing the bottles in the compressor area.
Description of the appliance Changing the basic appliance configuration The basic appliance configuration can be adjusted to suit your preferences. This can be done without using any tools. WARNING! Disconnect the appliance from the power mains before changing the appliance configuration! In order to avoid damaging the floor, use a floor mat or other suitable protection on the floor in front of the appliance. Take care not to damage the door gasket.
Description of the appliance Accessory set There is a possibility to buy additional equipment, shelves set, that contains the following components: • 2 standard wooden bottle shelves, • 1 bottle shelf with moon shaped recesses, • two pairs of full-extension telescopic rails, • screws ST4.8 × 13 Also, the following tools are needed to change the appliance configuration: Shelves set enables you to change the appliance configuration, so a total of 190 Bordeaux bottles can be stored in the appliance.
Operation Control panel 01 02 On/Off button; use to: • turn on the appliance if button is blinking slowly; keep pressing until the appliance switches on. • turn on the user interface if button is blinking quickly (power failure has occured); keep pressing until the display switches on. • switch to or from standby if the button is static lit; short press • appliance forced shutdown; 8 seconds press. X key; use to: • 03 close or answer ‘No’ to a pop-up menu.
Operation Touch screen • Operate your Wine Climate Cabinet’s touch screen by tapping or swiping it. INFORMATION! For the best response, touch the buttons with the main part of your fingertip. Every time you tap a button during use, a short tone will sound (unless this is adjusted in the settings). Opening the keyboard A keyboard can be opened for fast entry of notes, wine data fields, passwords and search. Please refer to chapter "Using the 'Plus' menu" to see how to open menu INVENTORY.
Operation When the input field requires only numbers a numeric keyboard appears. After entering the desired content press on the confirm key to confirm the entry. Initial use INFORMATION! When the appliance is moved or transported, it is mandatory to wait for four hours until the appliance can be connected to the mains. Setting the language Set the desired language in which the appliance’s display texts will appear. The default setting is ‘English’. 1.
Operation With your smart device scan the QR code to download the app. Network connection Connect your appliance to your home router to be able to pair your Wine Climate Cabinet with your mobile app to remote control it and to pair more appliances for monitoring. 1. Tap on the switch to turn "On" the appliance wireless network. Or press ‘Skip’ to not establish the network connection now, you can still do it in Settings. 2. After checking for available networks select the network you want to connect to. 3.
Operation Camera When the camera functionality is enabled, the camera will only be activated when a "scan" action is taking place. When the camera functionality is disabled, wine data can only be added manually. 1. Tap on the toggle switch to turn ‘On’ to enable the camera. 2. Press on the ‘Confirm’ key to save and continue. Time Zone Set the according Time Zone to your location. Time and Date If a network connection has not been established you will need to set the current date and time manually. 1.
Operation Temperature unit Choose Temperature units (C/F) with which to control and monitor Wine Climate Cabinet. Temperature Settings The factory default setting for each of three zones is 54°F (12°C). This temperature can be changed instantly. Use the temperature settings to set the temperature on each zone individually. Please refer to chapter "Status display" to see how to access this display.
Operation Main displays Standby display 40 01 Time, in digital format. 02 Date 03 Time, hour hand of the analog clock. 04 Time, minute hand of the analog clock. 05 Wi-Fi status. 06 Charcoal filter icon. Visible only when charcoal filter needs to be replaced. 07 Humidity box refill icon. Visible only when humidity in a zone is low.
Operation Status display 01 02 Temperature value of each zone; • Top value is for zone A, middle for zone B, bottom for zone C. • Tap any value to open the temperature settings (see chapter "Temperature Settings"). Relative humidity; • 03 Light switch; • 04 The time is shown here. Wi-Fi status. • 06 Tap on the ‘light bulb’ symbol to open the switch menu where light can be adjusted for a period of time. Time; • 05 Tap the value to show the humidity percentage in each zone.
Operation Status Icons Wi-Fi status No icon Wi-Fi turned off. Wi-Fi connection. Remote control enabled. Charcoal filter No icon Filter is operating correctly. Filter countdown close to expiration (Blinking icon) - filter countdown is expired, charcoal filters must be replaced and countdown reset.
Operation Using the ‘Plus’ menu The ‘Plus’ menu comprises a number of functions or settings. Please refer to chapter "Status display" to see how to open this menu. When only the ‘Plus’ icon is visible you can tap on it or slide it from left to right to open the menu. INFORMATION! You can also fix the partly opened plus menu for easy excess to the functions at all times by sliding the vertical colored line just after the icons.
Operation This menu offers the following choices: 3. 4. 44 • GENERAL • SOUNDS • DISPLAY • LIGHTS • PROXIMITY AND DOOR SENSOR • NIGHT MODE • NETWORK CONNECTION • SYSTEM Tap on the desired category and the setting to be adjusted. • tap on the desired choice from a list. • adjust a value by tapping the arrows above and below the value. • or switch a setting on or off by tapping on it. A colour background means ‘On’, a grey background means ‘Off’. Press the confirm key to confirm.
Operation GENERAL: You can set the following from this menu: • Language (language of the touch screen) • Location (Select appliance location) • Temperature unit (°C or °F) • Time and date (Select time zone and enable automatic time and date) • Time (enter manually) • Time format (12 or 24-hour clock) • Date (enter manually) • Date format (DD-MM-YYYY or MM-DD-YYYY or YYYY-MM-DD) SOUNDS: You can set the following from this menu: • General sounds (volume of sound signals and alarm) • Alarm s
Operation • Functional mode; - Shelf lights (temperature and intensity sliding percentage from 0 to 100) - RGB lights (colour and intensity sliding percentage from 0 to 100) - On for (how long for the cabinet to be lit in this mode) PROXIMITY AND DOOR SENSOR: You can set the following from this menu: • Proximity sensor (switch ‘On’ or ‘Off’) • On user presence; • • - Display change to (none, clock screen or status screen) - Light change to (none, ambient mode or functional mode) During door
Operation • Camera (switch ‘On’ or ‘Off’) • Key lock automatic (how long to automatically activate the key lock) • Use of Zone B (serving area or shelves) • Humidity (it is possible to stop monitoring humidity and the humidity box refill notifications) • Charcoal filters - Countdown (‘Reset’ button must be pressed when charcoal filters are replaced) - Notification (how long will the notification appear on the display before the expired date of the filters).
Operation In case the process failed, Wine Climate Cabinet remains on the previous software version and should operate normal. Please wait for some time before you try again. If the process continues to fail, contact the service department for further support. If the appliance is not responding after the update process, please wait for some time. The appliance might be still in the update process. If there is still no response after multiple hours, contact the service department for further support.
Operation INFORMATION! It is possible to change your INVENTORY MANAGEMENT once it has been used. However it is important to know that: • When you change to the EXACT management system, all current positioned bottles will get an UNPLACED state. Do you really want to change the INVENTORY MANAGEMENT system to EXACT? • When you change to the GENERIC management system all NOTES will be deleted and bottles will get a generic position on the current shelf.
Operation When the wine label has been recognized you will see its Wine Data tab. If not, you may take another picture and scan again the label or you can manually input the wine data if you believe the wine is unlikely to be in the Vivino database (for example, if it is from a domestic wine maker). List overview Scroll up or down the list to see all the registered wines.
Operation • Name: A – Z • Name: Z – A 06 Scan a wine. Direct access to the camera scanner. 07 Total number of bottles stored in the Inventory. Bottle overview – Generic management system • Tap on the arrows (above/below) to navigate through the shelfs of the cabinet. Each shelf will display all the bottles positioned inside that shelf. • Scroll left/right to navigate inside the shelf. • A below pop-up will appear to reveal information of the current bottle viewed (middle bottle).
Operation 05 Favorite wine (theme color outline circle). Selecting a wine To view a wine card, position and notes of a wine first select a wine, because these are all grouped in the same screen and divided by tabs. • List view: tap on any space inside the wine row. • Generic management system: tap on the wine label image or the wine row below. • Exact management system: tap on any circle. Wine Card Once a wine is selected you can access the data, position and notes of that wine in different tabs.
Operation Notes Tab. INFORMATION! From tabs to tabs changes are not saved. Press confirmation key to save the changes and return to the Inventory. Press X button to exit without saving changes. Unplaced icon This icon represents the ‘Unplaced’ shelf, therefore, displays all bottles which have not been given a position. This icon appears on both inventory systems on both inventory management systems.
Operation Wine Card Tab The Wine Card tab will show the wine data. Generic Management System Exact Management System 01 Favorite. To mark wine as a favorite. 02 Delete. To remove wine from the Inventory (positioning and notes will also be removed). 03 Image. Image scanned from camera. 04 Wine data; 05 54 • Winery • Wine name • Type • Region • Country • Grapes Edit. Tap to edit wine data and image.
Operation Positioning Tab The Positioning tab will allow you to save the position of bottles from the selected wine in your cabinet. You can also change here the number of bottles you have. Generic Management System 01 Shelf. Tap on the arrows (above/below) to move up and down the shelfs where you want to store the wine. 02 Quantity. Tap on the arrows (above/ below) to add or reduce the number of bottles of the wine. To delete this wine please refer to the Wine Card Tab on how to delete.
Operation Exact Management System 01 Shelf. Tap on the arrows (above/below) to move up and down the shelfs where you want to store the wine. 02 Exact position. Every circle is a reference to an exact position inside a shelf; 03 Unplaced bottles. Tap on the ‘plus’ and ‘minus’ signs to add or reduce the number of bottles of the wine without specifying the shelf you are storing them in. This is convenient if you only want to keep track of the number of bottles you have but not the position.
Operation Notes Tab The Notes tab allows you to take personal notes and set a best to serve alarm if it is a wine which is going to be preserved. Generic Management System In this mode you can save notes for the wine. 01 Added to inventory date. No action can be done here. 02 Edit. Tap here to open the edit menu to insert the following; • Notes. Enter special information about this wine… • Best to drink date. Input the date which is best to drink the wine. • Set reminder toggle switch.
Operation 58 • Notes. Enter special information about this wine… • Best to drink date. Input the date which is best to drink the wine. • Set reminder toggle switch. Turn it on and a date can be set for when you want the "Best to Drink" reminder to pop up.
Maintenance Defrosting the appliance • The wine climate cabinet is defrosted automatically. Drops of water will flow through an opening in the rear wall into a tray fitted above the compressor, from where they will evaporate. Cleaning the appliance WARNING! Switch off the appliance and remove the plug from the socket before you start cleaning it. WARNING! Do not use abrasive cleaning agents, as they can damage the surface. WARNING! Do not remove the rating plate located inside the appliance.
Reversing the door opening direction The direction in which the appliance door opens can be reversed. In order to safely reverse the door opening direction, at least three people should carry out the procedure described below. The door weighs about 88 lb (40 kg). WARNING! In order to avoid damaging the floor, use a floor mat or other suitable protection on the floor in front of the appliance. Also, plan for a suitable spot where you will temporarily place the door during the procedure.
Reversing the door opening direction To reverse the door opening direction, proceed as follows: 1. Open the appliance door. 2. Remove the two hinge caps (1) at the top and bottom. Set them aside, as you will need them later on. 3. Partly (by no more than 5 mm) undo the hinge screws (2) at the top and bottom. Do not completely undo the screws. This way, the door will remain in contact with the housing.
Reversing the door opening direction 62 4. Remove the door, complete with the hinges, by moving it in the direction indicated by the arrow. Carefully place the door on the surface prepared for this purpose. 5. Remove the cap (3). Save it (e.g. in the bag with the instruction manual) if you ever decide to reverse the door opening direction back to the original setting. 6 Undo the screw (4) and remove the cap (5). Set them aside, as you will need them later on.
Reversing the door opening direction 7. Remove the cap (6) and discard into the bin for plastic waste. 8. Completely undo the screws (2). Then, partly screw them into the holes at the top and bottom on the opposite side of the housing. 9. Carefully rotate the door by 180 degrees.
Reversing the door opening direction 10. Hang the door onto the screws (2) at the top and bottom and slide it in the direction indicated by the arrow (a). 11. Tighten the screws. The screws should be tightened to a torque of 4.5 lb/ft (6.2 Nm). 12. Replace the hinge caps (1).
Reversing the door opening direction 13. On the opposite side from the top hinge, attach the cap (5) using the screw (4). 14. Take the caps (7 and 8) from the bag with the instruction manual and install them on the side opposite from the hinges. 15. Close the door and make sure it is aligned with the housing. The housing side and the edge of the door should be parallel.
Reversing the door opening direction If the door is not aligned with the housing (the angle α is not 0°), then proceed as follows: 66 1. Open the door and detach the gasket from its groove in the corners at the top and bottom hinge. 2. Release the screws (1) at the top and bottom. Do not undo them completely! 3. Close the door, then rotate the screw (2) at the top and bottom to adjust the door position.
Reversing the door opening direction 4. Adjust the door position until the edge of the door is parallel to the side of the housing. 5. When the door edge is parallel to the housing side, open the door again and tighten the screws (1) you released at the start of the door adjustment process. 6. Carefully press the gasket back into the groove in the door.
Solving problems If you have any doubts about whether your appliance is working properly, we recommend to first read suggestions below. Tips & Tricks When temperature or humidity in the appliance is out of range an alarm will be triggered. This is an alarm sound and notification pop-up. To remove the sound and pop-up press X key or Confirm key. The temperature and/or humidity of the zone which causes the problem will be blinking on the display until it has been recovered.
Solving problems Humidity out of range Possible cause Countermeasures Frequent and/or long door openings. Try to minimize opening the door of the wine climate cabinet appliance. Prepare loading plan of large quantities of bottles in advance to minimize the required time for loading. Try to use the ConnectLife mobile application as much as possible to change appliance settings. Recent big changes in temperature settings.
Solving problems Error Code Description E9 Door sensor error. F1 Zone A fan error. F2 Condenser fan error. F3 Zone B fan error. F4 Zone C fan error. H1 Humidity sensor error for zone A. H2 Humidity sensor error for zone B. H3 Humidity sensor error for zone C. H4 Humidity sensor error for outside environment. P1 Proximity sensor error. T1 Temperature sensor error for outside environment. T2 Temperature sensor error for zone A. T3 Temperature sensor error for zone A evaporator.
Solving problems Other display warnings Warning Cause/Solution Wi-Fi icon is displayed on the The device is connected to the cloud service. screen. Wi-Fi icon with additional The device is connected to the cloud service and remote control is check mark is displayed on enabled. the screen. Make sure the device is connected to a local wireless network. Make sure your LAN has access to the Internet. There is no visible Wi-Fi icon The device is not connected to the cloud service. on the screen.
Solving problems Warning Cause/Solution The temperature or humidity The temperature in an individual room is outside the permitted limits. of a zone is out of range. • Zone »X« Temperature is out of range. The average humidity value blinks because the humidity of one or more zones is below 40%.
Solving problems General problems Problem Cause/Solution Appliance cools continuously • for a long time. • Appliance makes a noise. Some or all LED lights are not working. The ambient temperature is too high. The door has been opened for too long or too frequently. • The door does not seal properly (the seal is dirty, the door is misaligned or the seal is damaged, etc.). • A larger quantity of bottles is newly inserted. • Insufficient air circulation around the compressor and condenser.
Environmental aspects Disposal of packaging and appliance This appliance is made from sustainable materials. This appliance must be disposed of in a responsible manner at the end of its service life. Contact the local authorities for information about the method. INFORMATION! See also the chapter ‘Disposal’ in the Safety instructions. The packaging of the appliance is recyclable. The following materials may have been used: • Cardboard. • Polyethylene foil (PE). • CFC-free polystyrene (hard PS foam).
Service and warranty Limited Warranty – Residential Appliances This Limited Warranty covers parts and labor, except as set forth in this Limited Warranty. Service must be providedby an authorized ASKO service company. YOUR SOLE AND EXCLUSIVE REMEDYUNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. This Limited Warranty is valid only when the ASKO Product is used in the country in which it was purchased.
Service and warranty warranty rights.This Limited Warrantygives you specificlegal rights and you may have other rights that vary from jurisdiction to jurisdiction. Attempted repair by any person other than an authorized ASKO service company will void this Limited Warranty. Limitation of liability IN NO EVENTSHALL ASKO OR THE MANUFACTURER AND THEIR RESPECTIVE PARENTS, SUBSIDIARIES AND AFFILIATES BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR SPECIAL DAMAGES.
US.ASKO.COM • CA.ASKO.COM • ASKO.
