User Manual Digital Signage Menu Board M*****
Please read the instructions carefully before using the product. 1> Connect the power cord correctly and use a properly grounded electrical outlet. 2> Do not change or replace any components without authorization. 3> Do not use two-core plug, ensure the power supply is AC100240V, 50/60Hz 4> There are AC 220V high voltage parts inside the machine. Do not open the shell without authorization. 5> Please keep the machine away from any heat sources such as electric radiators or direct sunlight.
NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE: Changes or modifications made to this equipment not expressly approved by (Shanghai Goodview Electronics Technology Co., Ltd.) may void the FCC authorization to operate this equipment.
I. Overview 1.1 Brief Introduction ........................................................................... 2 1.2 Product Structure ........................................................................... 2 II. Installation ....................................................................................... 3 2.1 Machine Unboxing.......................................................................... 3 2.2 Installation Guide ........................................................................
I. Overview 1.1 Brief Introduction Digital signage adopts LG original IPS commercial panel, 450 cd/ , the wider color range and high restoration showing professional image quality in any lighting environment. Anti-spot tech ensures a long-term well performance without black spot. Built-in GTV publishing system makes multi-terminals remote control comes true. The intelligent power on & off function save more cost for you.
05.VGA 06.AUDIO IN 07.USB 08.USB 09.WIFI II. Installation 2.1 Machine unboxing Due to the large size and heavy weight, we suggest at least two people in handling. Since the display panel is fragile and easily scratched, please handle it gently. Do not place the product face down without a protective pad.
2.2 Installation Guide The manufacturer shall not be liable for installation by non-professionals. To avoid shortening the service life of electronic components, do not install in a humid environment such as kitchen, bathroom, and etc. Please save the packing cases for future transportation. 2.2.1.
Step 3 Hang the machine with hook fixed to the hanging board and tighten the safety screw. III. Operation Guide 3.1 Power on Turn on the switch when powered on.
3.2 Remote control Note: Only on the home page can you call out the OSD menu by pressing SETUP.
V. OSD Menu Use the remote control to open the OSD menu to set system parameters. Press STOP on the remote to stop the current playback and present the home page as shown below. The middle of the top displays the current playing status, the bottom from the left to right are time, date and local storage (including apk version, firmware version, local storage). The working mode is LAN by default. 4.1. System Setting Navigate to System Settings on the main menu and press on the remote to open it.
4.1.1. Language Move the cursor to "picture display language", press confirm key to set the display language of the terminal screen, there are many options such as simplified Chinese and English. Press the left and right arrow of the remote control to adjust the language option, press the arrow to move the cursor to return, and return to the system settings menu. 4.1.2. Switch Screen Mode In the system setup menu, move the cursor to "screen mode switch. The system screen can be set on this interface.
4.1.3. Resolution 1920*1080 by default 4.1.4 Real Time Clock Terminal interface can display the current time, here can set the display position of the real-time clock. ЮTop Left/Right - displays the clock in the top left / right corner on the screen. ЮBottom Left/Right - displays the clock in the bottom left / right corner on the screen. ЮOff - turns off this feature and do not display clock on the screen. 4.1.
ЮOff - scroll text, no matter included or not in the playlist, will not appear on the screen. ЮOn - scroll text, if included in the playlist, will be displayed on the bottom of screen. 4.1.8 Touch Aid Closed by default. When turned on, the icon appears on the upper left corner of the APK main interface. You can also call the touch aids by clicking left twice in the upper left and lower left corners of the APK main interface. ЮSettings: Automatically enter the OSD menu interface after clicking “settings”.
Slave: Automatically play programs in sync with the host. gSync Group: Can be set to 0~255. gSync Mode: 0ˈ1ˈ2ˈ3ˈ4ˈ5ˈ999 seven modes. 0: The host sends a sync signal at the beginning of each clip. 1: The host sends a sync signal every minute.
The player can work in single (stand-alone), LAN(default), WIFI. Single mode only supports USB import, the others support GTV remote publishing. 4.2.2 Manage Soft You are allowed to choose a content management software running on the server platform when the player works in LAN/WIFI mode. This menu is unavailable in single (stand-alone) mode. GTV (Default)- use Signway GTV as the content management software to create and publish playlists as well as manage player networks.
Ezposter/ADPE - use Signway EzPoster or ADPE as the content management software to create and publish playlists as well as manage individual players˄Notes: need to install Ezposter client app and set to the same LAN to realize remote publishing˅ 4.2.3 Play Mode Three playback modes are supported when players work in stand-alone mode. gOpen - Media files, such as images and videos, stored in the root directory of a USB disk can be played and content packing is not required.
4.2.5 Storage This menu allows you to choose where the programs to be played are stored. The window differs as PLAYER work mode changes. gInternal Memory˄Default˅- only the programs stored in the built-in memory will be played. gSD Card - only the programs stored in the SD Card will be played. gUSB - only the programs stored in the USB disk will be played.
4.2.6 Machine Number Setting The mainboard ID is 8 digits by default, the local ID can be automatically obtained, and manually modified. 4.3 Network Setting The local ID can be set in LAN ,WIFI . Connect the server by IP or domain name.
4.3.1 Server Configuration IP mode: Select IP mode, choose the server address to set. Select the server port to editing. Port number can be set here. (note: the port number various for different servers. Only by entering the correct port number can successfully connect to the server). Domain name mode˖Select domain name to call the server address interface to set.
TCP Port: Default 4701, unchangeable UDP Port˖Default 4700, unchangeable MAC Address: Show MAC address, unchangeable (Notes: TCP and UDP parameters depends on sever connected, different server various in port number) 4.3.2 WIFI Setting When the terminal works in WIFI mode, the wireless network can be set this menu cannot be entered in other modes.
Move the cursor to the wireless network to which you want to connect. Press the ok key to select the network to connect to. If a password is required for a network connection, the following prompt appears. Enter the corresponding password according to the prompt, press the back key first to hide the keyboard, and select [connect] to access the terminal to the wireless network. 4.3.3 IP Type When the terminal works in LAN mode, the IP acquisition mode of the wired network can be set .
Manual: manually set the fixed IP address. 4.4 Date and Time Navigate to Date and Time on the main menu and press on the remote to open the menu which allows you to set system date and time.
4.4.1 Date Setting Date – press the date bar to open a panel to adjust the year and date. Press the arrow buttons on the remote to navigate to the box you want to operate. Press +/- to adjust the date. Once satisfied, press Save to apply the changes. 4.4.2 Time Setting Time – press the time bar to open a panel to adjust the time. Press the arrow buttons on the remote to navigate to the box you want to operate. Press +/- to adjust the date. Once satisfied, press Save to apply the changes.
Network time synchronization˖ On: In the WIFI/LAN , it will synchronize network time automatically. Off: Will not synchronize network time in any mode. IP display: On: Show IP address Off: IP address will automatically hide, display as XXX.XXX.XXX.XXX Daylight setting: On˖During daylight, system will add one hour by fault. Off˖During daylight, system will not change accordingly. Time zone: You can set time zone here, the default time zone is China standard. 4.
Uniform Setting (Default) - This mode will have the player turned on/off automatically at your specified time every day. For example, you can have a player on from 8:00 to 22:00 every day. 4.5.1 Uniform mode Timer – On and off time can be defined respectively in 5 timers. Press the arrows on the remote to move to a box and make adjusting. Always On - The player, if powered, keeps being on all the time.
4.5.2 4.6 Week Mode Timer Strategy This menu allows you to specify playback volume and display screens for a specified period. 4.6.1 Volume Time This allows you to specify playback volume for specified periods. When the volume policy is off, you can manually adjust the terminal volume. When the volume policy is turned on, the volume can be set for up to 5 time periods.
4.6.2 Port Strategy Timer – On and off time can be defined respectively in 5 timers, switch timer to HDMI, VGA and digital signage channel by default. 4.7 File Management Press File Management to open the menu which allows you to check the storage space usage and format the disk if necessary. Format: select format to format the internal storage, the content imported through the USB will be removed to free up space.
4.8 Playback in Single (Stand-alone) mode “setup” to enable OSD menu -> System Control>Work Mode->Single ˄stand-alone˅ Copy video/picture to the root directory of the USB, insert the USB into the USB port of the machine, and the system will automatically detect and copy the program, as shown in the figure below.Confirm if the copied material the same quantity in USB.
According to the prompt, it will automatically playback the program once the USB removed. (Note: Name the program as 1,2,3 if you want to play in order) V.Troubleshooting Problem Reason 1.The power cord is disconnected Solution 1.Plug in the power cord. 2.The power switch (on the 2.Make sure the power back of the machine) is off. switch is on. No image Unstable display or with noise 3.Network is not connected. 3.Connect the signal to the display. 4.The display is in standby mode.
2.The volume is turned down to the minimum With image but no sound 3.[MUTE] is on 3. Keep the [MUTE] 4.Not connect to the external off. speaker. . 4. Connect to the external speaker and and adjust to the appropriate volume The display adopts high precision, its normal that Some pixels on the screen may some pixels are not active. not be active.
VI. Service policy The voltage, frequency and current requirements indicated on label must be met since any misconduct will lead to abnormal operation, equipment damage, or fire disaster. Maintenance can only be carried out by qualified technicians. Please contact a qualified electrician or manufacturer if you are in doubt about the installation.
ტ Normal Mode RF Power Range(WLAN,Bluetooth) Band (GHz) 2.4 (2.4~2.4835) Band (GHz) Bluetooth Mode Range(dBm) 802.11b 11.00-13.00 802.11g 10.00-12.00 802.11n(HT20) 10.00-12.00 Mode Range(dBm) GFSK 5.00-6.00 ± -DQPSK 2.00-3.00 8-DPSK 2.00-3.
Digital Signage Menu Board M***** Welcome to our website: www.goodview.com/en * Product info * Specification * Marketing events * News * Software solutions Shanghai Goodview Electronic Technology Co., Ltd. Tel: 400-09690-987 Mail: sales@goodview.com Web: https://www.goodview.
