User Manual Interactive Whiteboard GM** S4
Safety Instructions: In order to ensure the reliable use of the equipment and the safety of personnel, please comply with the following during installation, use and maintenance: System grounding: The system must have perfect grounding. Otherwise, not only signal interference, instability or mechanical damage, but also personal accidents may be caused by leakage. >It is prohibited to change or add any parts to the mechanical and electrical design of this product.
Content .................................................................................................................................... 01 I. Brief Introduction ........................................................................................................... 02 1.1. Brief Introduction .......................................................................................................... 02 1.2. Product Structure...............................................................................
I. Brief Introduction 1.1. Brief Introduction Goodview Interactive Flat Panel (PLUS), 4KHD display with perfect image performance, support writing, annotation, hand erasing, email, QR scan saving and 4 screen split. The wireless projection is complied with multiple mobile terminals such as the mobile phone, computer, tablet, and etc. Running fast and smoothly, the overwhelmed upgraded configuration contributes to a higher conference efficiency. 1.2.
II. Installation 2.1. Machine unboxing Due to the large size and heavy weight, we suggest at least two people in handling. Since the display panel is fragile and easily scratched, please handle it gently. Do not place the product face down without a protective pad.
2.2. Installation Guide The product supports both wall mount and bracket mount. The manufacturer shall not be liable for installation by non-professionals. To avoid shortening the service life of electronic components, do not install in a humid environment such as kitchen, bathroom, and etc. Please save the packing cases for future transportation. 2.2.1. Bracket Mount The movable bracket can be adjusted and lifted from 1390mm to 1660mm, which can meet the viewing needs from different heights.
2.2.2. Wall Mount The installation environment needs to be checked in advance due to the heavyweight. The wall should bear more than 200kg. If the machine is mounted on the wooden wall, please ensure that the thickness at least 2cm, the load-bearing should over 200kg. Please follow the hole spacing of the product to install, and keep a certain distance between the product and wall for good ventilation. Please prepare 4 M8 bolts (with a screw length of 50mm) and tighten the bolts.
3.2 Enter the Main Interface 3.3 Channel Switch Slide from the bottom of the screen to adjust the channel bar and select “OPS”. Select the “Annotation” button at the top right to enter the Windows system interface. (Notes: GM55S4、GM65S4、GM75S4 have equipped with OPS slot on the back of machine) 3.
Home: Click “More”→ “Settings”→ “Internet and device”→ Select the appropriate access mode 3.5 Screencast Guide Screencast Guide Prerequisite: Connect to the same network with IFPD One terminal to multi-screens Click “screencast” on main interface →Click MeetingPad →Turn on “ Display Group” → Select the Multi-terminals to one screen MeetingPad Setting Click“screencast”on main interface → “Settings”(Upper right corner)→Select split mode 1.
Connect to the same network with IFPD→ Scan the QR bottom left→ Download the Eshare and install to run. Mobile Phone Eshare - PC Instruction Eshare - Mobile phone Instruction 3.5.1. 3.5.1.1. IOS Mobile Phone Method 1: Connect to the same network with IFPD→ Open Airplay→ Select the MeetingPad → Enable “Screen Mirroring” → Click “Finish” Method 2: Download “Eshare” from APP store → Install to run.
Step2: Click on the top right corner Step3: The floating box pop up → open the “display group” settings → select the Meeting Pad and will see the interface below.
3.5.2. 3.5.2.1. Multi-terminals to one screen projection Conference flat panel terminal Prerequisite: Connect to the same network with IFPD. Step 1: Click on the top right corner. Step 2: The floating box pop up → Open the PIN password shown as below. Step 3: Select the split mode.
3.5.3. Mobile Terminals Step1: Download Eshare and follow the guide below according to the devices. Mobile phone: Open the Eshare and you will see the interface below.
Select the MeetingPad •Screen mirroring Mirror your windows PC or rooted android device screen to tablet. •Wireless screencast Wireless cast to the tablet from PC or mobile phone. •Wireless camera Your android phone or tablet becomes a wireless camera, you can put your phone or pad anywhere you want to watch, then you will see the live show on tablet. •Remote control Use your android or IOS device as touch mouse, air mouse, keyboard, touch pad and remote controller of tablet.
3.6 Whiteboard Toolbar 3.
3.8 Background Color Change 3.
3.10 More Applications 3.
IV. Accessory 4.1 Smart Pen Function 4.2 Udisk Dongle Plug Udisk dongle to the computer and connect to the same network with IFPD, open the Eshare inside. 4.
Access to the hotspot→ Plug the display dongle to the tablet for paring → Plug on your PC → Press the dongle when it lights long V. Troubleshooting Problem No image Unstable display or with noise Image is unfocussed Abnormal color Reason 1. The power cord is disconnected 2. The power switch (on the back of the machine) is off. 3. Network is not connected. 4. The display is in standby mode. Caused by surrounding electrical equipment or fluorescent lights. 1. The signal cord is not properly connected.
VI. Service policy The voltage, frequency and current requirements indicated on label must be met since any misconduct will lead to abnormal operation, equipment damage, or fire disaster. Maintenance can only be carried out by qualified technicians. Please contact a qualified electrician or manufacturer if you are in doubt about the installation.
Interactive Flat Panel GM** S4 PLUS Welcome to our website: www.goodview.