User's Manual

Goodbetterbest Limited
Suites 103-107, Devonshire Business Centre, Works Road, Letchworth, SG6 1GJ, United Kingdom
Tel: [phone] Email: [e-mail]
GC2PS3-21
GC-2 Wireless RF Controller
operational Manual
Feature :
- 8 functional buttons: ○, X, △, □, L1, R1
- 2 x Triggers L2, R2
- Select / Start Button
- Home Button
- Directional Pad
- 2 x Rumble Motors
- Mni joystick buttons, L3, R3
- Mini USB Jack for battery charging
- Powered by built-in Li-ion Battery
- Channel LED, Turbo LED
- USB Dongle
- Turbo feature
- Thumb stick sensitivity
A) Connecting the GC2PS3 game pad
To connect the GC2PS3 game pad
1. Plug the USB Dongle into the USB Port #1 on the PS3 Console, then turn on the console
2. Press the “Home” Button on the GC2PS3 game pad. The GC2PS3 will select the port automatically, and the corresponding
LEDs light.
LED PORT
1 1
2 2
3 3
4 4
1+4 5
2+4 6
3+4 7
3. Now, you can enjoy the game play with Gioteck wireless game pad.
B) Turbo function
Buttons support turbo feature are O, X, △, X, L1, L2, R1, R2
All turbo buttons are synchronized
All turbo buttons are with the same speed of 8Hz.
To program a button with Turbo function, press [TURBO] and the [button] at the same time. LED flashes in 8Hz
Press again the [TURBO] and the [button] at the same time to cancel the turbo function. LED remains OFF.
Once power off, all buttons returns to default without Turbo function.
C) Thumb stick sensitivity
4 levels settings are available.
Level 1 is normal in 100%
Level 2 is with 75%, moves the thumb stick 1.5 times faster in speed
Level 3 is with 50%, moves the thumb stick 2 times faster in speed
Level 4 is with 25%, moves the thumb stick 4 times faster in speed
To set up the sensitivity, press and hold the [Turbo] button, flick the thumb stick left and right to toggle and advance to
the next faster speed settings. During the set up process, LED 1 lights up to indicate for level 1, LED 2 lights up to indicate
for level 2, LED 3 to indicate for level 3, LED 4 lights up to indicate level 4
Flicks the left thumb stick to set up the left thumb stick sensitivity
Flicks the right thumb stick to set up the right thumb stick sensitivity
Once power off, all thumb sticks returns to default with 100% setting