Z-Wave USB Dongle User’s Manual
Z-Wave USB Dongle ABOUT THIS MANUAL This manual is designed for use with the Z-Wave USB Dongle. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice.
Z-Wave USB Dongle Table of Contents 1. Introduction ............................................................................................................1 Features ............................................................................................................................. 1 Package Contents .............................................................................................................. 2 System Requirements...............................................................
Z-Wave USB Dongle 1. Introduction This Z-Wave USB Dongle enables you to access your USB devices without limitation caused by wire. This Dongle is designed to adapt your regular USB 2.0 interface to a Wireless USB interface. Simply plug this dongle to your USB socket then the notebook turns into a wireless USB enabled platform, access your Z-Wave USB devices such as printer, scanner freely without boundary up to 10 meters.
Z-Wave USB Dongle Package Contents Z-Wave USB Dongle x1 CD (Driver and User’s Manual) x1 Quick Installation Guide x1 System Requirements Windows 2000, XP, Vista¥, Windows 7 Applicable For Serial Product of Z-Wave Z-Wave dongle is Z-WaveR-Certified software and is compatible with Z-Wave Cerfied devices. Z-Wave standard is designed to ensure that Z-Wave-Certified devices work together, regardless of manufacturer.
Z-Wave USB Dongle 2. Installation On Windows XP and 2000 To install Driver: 1. Insert the provided CD into disk drive. Click Next to the Next step for installation.
Z-Wave USB Dongle 2. Click Install to begin the installation. 3. Click Finish to exit the wizard. 4. Please Plug in Z-Wave USB Dongle to the USB Port on your PC.
Z-Wave USB Dongle On Windows Vista and 7 To install Driver: 1. Insert the provided CD into your disc drive, locate and double-click the Setup.exe file under E:\Driver where E is your disc drive letter. Click Next to the next step for installation.
Z-Wave USB Dongle 2. Click Finish to exit the wizard. 3. Please Plug in Z-Wave USB Dongle to the USB Port on your PC.
Z-Wave USB Dongle 3. Specifications Protocol Z-Wave USB Dongle User Interface USB A-Type Plug USB Compliance USB 2.0 specification; backward compatible with USB 1.1 Transmit Power 94.92 dBμV/m 94.92 dBm Frequency 908.42MHz Transmit Data Rate 9.6 kbps, 40 kbps ˥˙ range ˄ˈ̀ʳ˼́˷̂̂̅ʿʳˆ˃̀ʳ̂̈̇˷̂̂̅ʳ ʳ Housing ˣ˿˴̆̇˼˶ Dimension 59(L)X26(W)X12.
Z-Wave USB Dongle 4. Regulatory Compliance FCC Conditions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.