Power Monitor User’s Manual
ABOUT THIS MANUAL This manual is designed for use with the Power Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice.
Table of Contents 1. Introduction ............................................................................................................1 Features ............................................................................................................................. 2 Package Contents .............................................................................................................. 2 Z-Wave...............................................................................................
1. Introduction This Power Monitor enables you to find out what appliances are actually worth keeping plugging in and can save your energy costs. This Power Monitor can send and receive information to and from the Z-Wave enable devices wirelessly. You can monitor the values of measurements and setup the functions in your home through PC connectivity with Z-Wave USB dongle when you are away from home. Caution: To avoid damage to the monitor, please keep from humidity and any inappropriate usage.
Features Simply plug in the wall outlet and attach the electronic appliances. Shows the operating costs of electronic appliances that plug into the power monitor. Calculates the cost of power consumed in time periods of hour, day, week, month and year. Display the values of the measurements on the remote site. Fully compatible with Z-Wave enable network that can communicate with any Z-Wave certified device.
2.
Product Description Below is a description of button, light and plugs for the Power Monitor. LED Indicator The LED (dual color) will light red to indicate the Power Monitor accesses to electricity. When the LED flash green, it stands for Z-Wave RF under transfer/ receive status. Z-Wave Enabled Outlet This outlet is used to plug in the device you wish to detect, such as your electric appliance. Note that any device plugged into this outlet must NOT exceed 1600 watts.
Installing the Power Monitor NOTE ======================================================= Before you install or use this Power Monitor, please install your Z-Wave controller first and make an inclusion for your Z-Wave device. Not all Z-Wave enabled remote controls have the same installation process. Actual instructions may vary; it depends on the software that Z-Wave controller provided. ============================================================ 1.
3. Specifications Item Description Z-Wave (Multi Channel / Multilevel Sensor / Meter Protocol Command Class ) Module Type Plug connection Max Voltage 120 VAC Max Current 13.4 A Max Power 1600 W Operating Voltage AC110~120V/60Hz Red color: Power On. LED Indicator Green color: LED light flash by Z-Wave RF transfer/ (Dual Color) receive status. Frequency 908.
4. Regulatory Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
