User Guide
PACKAGE INCLUDES Magnetic Leather Case aim L20 Carabiner User Guide USB C-Type Cable (※ Charger not included) APPERANCE Microfiber Cloth (For the Lens) Mode Button Objective Lens User Guide Power / Measurement / Shot tracking (2) Button Diopter Adjustment 6X Monocular Eyepiece LED light (States of slope On/ Off & Charging) Cable connector/ Protection cover Laser Aperture Product Label and Serial Number Shot tracking (1) Button
Viewfinder(OLED) Description 1 2 5 3 6 9 10 4 7 8 1 2 3 4 5 6 7 8 9 10 Slope-adjusted distance Distance unit (Meter / Yard) Targeting Crosshair Focus Circle (Blinks when searching the target; stops when the target is captured) Displays when scan mode is activated Displays when pin mode is activated Measured Distance Height of the Target (Uphill: No indication, Downhill: -) Battery Indicator Displays when shot location is transmitted ※ aim L20 features a OLED that allows brighter and clearer d
GETTING STARTED ▶ How To Charge • Open the protection cover located below the Eyepiece • Plug in the charging cable to start charging(5V, 2A charger recommended, cable not included) • It will charge normally without pushing the charging cable all the way into the terminal. ※ It may be damaged if excessive force is applied. ▶ Checking the Charging Status Through LED • Fully charged: Green color LED always on. ▶ How To Operate 1. Click the Power / Measurement button 2.
▶ How to turn ON / OFF Slope • Press the mode button for 5 seconds to turn ON/OFF slope. When the slope is ON, the distance adjusted for the elevation difference is displayed at the top, and the straight line distance and the elevation difference are displayed at the bottom. When the slope is OFF, only the straight line distance is displayed at the top.
[Standard Mode and Pin Finder Mode] Press and hold Power/ Measurement button to activate Pin finder Mode • Press the Power / Measurement button to display the distance along with vibration. • Press and hold the Power / Measurement button for 2~3 seconds to activate Pin finder mode. • Pin finder mode is used to display the closest target when two or more targets are found, even if there are any other objects such as tree or rocks behind the pin.
▶ Overview of Shot tracking • The shot tracking feature is for recording the current position by pressing ‘SHOT or Power/Measurement button’The current location is transmitted to the smartphone through Bluetooth, so the shot location and route can be reviewed after the round. • The current location is recorded with the location of the smartphone, so it is recommended to carry the smartphone during the round.
▶ How to use shot tracking [Shot tracking mode 1] • When the shot tracking button is pressed at the desired location, the shot tracking icon blinks for 3 seconds and the location data is transmitted. ※ In shot tracking mode 1, the power can be turned on with the shot tracking button.
SAFETY WARNING, CARE AND MAINTENANCE Please read the manual guide carefully before using the device. - Do NOT aim directly at the sun or an eye(as it may cause eyesight loss). - Do NOT turn the device on while looking into the laser aperture or objective lens(as it may cause eyesignt loss). - Golf Rangefinders may fail to measure the distance when the target is measured through glass. - Do not leave the device in direct sunlight for a long period of time, as it may cause damage on the unit.
TROUBLESHOOTING ▶ The unit does not turn on. • Press the Power / Measurement button. • When the power doesn’t turn on after pressing the button, check the battery charging level. ▶ The distance is not shown on the display. • Check the mode setting (Standard / Scan) • Check if there is any object that is blocking the lens. • Lack of light, target movement, non-reflective object, object size, backlit object, and the weather may affect the display of the unit.
SPECIFICATION Item Spec. Physical size 102.8 X 58.7 X 34.7 mm Measuring Speed 0.15seconds Magnification Weight Range Accuracy Objective lens diameter Eye Relief Battery type Battery life No. of measurements (Fully charged) 6X 170g 2~880Y / 2~800M +/- 1 yard 20 mm 15.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.