STEREO 3CD MINI HI-FI SYSTEM WITH SUBWOOFER AND PLL RADIO BLUETOOTH AND USB CHARGING MODEL : BT9279MO INSTRUCTION MANUAL
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that product heat.
20. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 21.
COMPLIANCE WITH FCC REGULATIONS FCC ID: RQU-HF630PB This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
Should any trouble occur, remove the power source and refer servicing to qualified personnel. BATTERY INSTALLATION The battery compartment is located on the back of the remote control. 1. Remove the battery compartment door by pressing in on the tab and lifting it off. 2. Insert two (2) AAA size batteries (not included) into the battery compartment as the polarity markings inside the battery compartment. 3. Replace the battery compartment door.
LOCATION OF CONTROLS 1-3) DISC 1,2,3 SELECTOR 4) CD OPEN BUTTON 5) STANDBY/ON BUTTON 6) SLEEP/TIMER BUTTON 7) X-BASS BUTTON 8) MEM/CLK-ADJ BUTTON 9) PLAY MODE BUTTON 10) PRESET UP/DOWN BUTTON 11) STOP/ST-MONO BUTTON 12) SKIP DOWN BUTTON 13) USB PORT 14) DISC SKIP BUTTON 15) STANDBY INDICATOR 16) LCD DISPLAY 17) FUNCTION BUTTON 18) REMOTE SENSOR 19) VOLUME KNOB 20) EQ BUTTON 21) PLAY/PAUSE BUTTON 22) SKIP UP BUTTON 23) HEADHONE JACK 24) AUX IN JACK 25) FM ANTENNA 26) SUB-WOOFER TERMINAL 27) SPEAKER/ TERMINAL
LISTENING TO RADIO MANUAL TUNING 1. 2. 3. PRESS “FUNCTION” BUTTON (17) TO SELECT TUNER. TUNE TO THE REQUIRED STATION BY PRESSING THE TUNING UP OR DOWN BUTTON (22,12). ADJUST VOLUME KNOB (19) TO THE DESIRED VOLUME LEVEL . AUTO TUNING 1. 2. 3. 4. 5. PRESS “FUNCTION” BUTTON (17) TO SELECT TUNER. PRESS AND HOLD THE TUNING UP OR DOWN BUTTON (22,12) FOR 1-2 SECONDS AND THEN RELEASE THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP UNTIL A RADIO STATION IS REACHED.
SKIP MODE (SKIP UP 1. 2. 3. /SKIP DOWN ) DURING PLAY OR PAUSE MODE, IF SKIP UP BUTTON (22) IS PRESSED IT WILL GO TO NEXT TRACK AND DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE. DURING PLAY OR PAUSE MODE, IF SKIP DOWN BUTTON (12) IS PRESSED. IT WILL GO BACK TO THE BEGINNING OF THE TRACK, ORIGIANL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE. AFTER STEP 2, PRESS SKIP DOWN BUTTON (12) AGAIN WILL GO TO THE PREVIOUS TRACK AND REMAIN THE PLAY OR PAUSE MODE.
MORE FEATURES A. SLEEP SETTING 1. PRESS & HOLD THE “ SLEEP ” BUTTON ON REMOTE CONTROL, TO ACTIVE & ADJUST THE SLEEP TIMER IN THE ORDER OF 90 > 80 >70….10 MINUTES AUTOMATICALLY. 2. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING. 3. TO CANCEL THE SLEEP MODE, PRESS THE “ SLEEP ” BUTTON ONCE UNTIL “ SLEEP ” INDICATOR DISAPPEAR. B. TIMER SETTING THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY MUSIC FROM CD, TUNER.
REMOTE CONTROL TRANSMITTER CONTROL FUNCTIONS BATTERY INSTALLATION (BATTERY NOT PROVIDED) THE INFRA-RED TRANSMITTER REQUIRE 2 PCS “ AAA “ BATTERY FOR OPERATION BUTTON DESCRIPTION POWER PRESS TO SWITCH THE SYSTEM INTO STANDBY MODE FUNCTION PRESS TO SELECT DIFFERENT FUNCTION MODE CLK-ADJ/MEMORY IN STANDBY MODE : PRESS TO ACTIVE CLOCK SETTING IN TUNER MODE : PRESS TO PRE-SET RADIO MEMORY IN CD : PRESS TO ACTIVE PROGRAMMING FUNCTION SKIP UP/DOWN IN CD/SD/USB MODE : TO SELECT PREVIOUS / NEXT TRACK IN TUNE
SPECIFICATION Power Requirement Main unit: Remote control AC120V~ 60Hz 2 x 1.5V “AAA” size batteries (not included) Frequency Range Radio Band FM 87.5 ~ 108 MHz Output Power Speaker (RMS): Subwoofer (RMS): Total P.M.PO: 2x40 Watts 2x50 Watts 800 Watts USB Port Charging Port: 5V/2.1A CARB statement: " The products indicatediiiiii in this shipment were produced with medium quality fiberboard.
