Installation Instructions

Control Panel
Power On/Off: Press to control the main power of the sauna
Power Indicator: Indicates the status of the sauna’s main power
Work Start/Stop: Press to control the working functions of the
sauna
Work Indicator: Indicates the working status of the sauna
Heat Indicator: Indicates the status of heating function
Light: Press to control the lighting function
Time Display: Displays the heating time of the sauna in minutes
Time: Press to adjust the setting of the timer
Temperature Display: Displays the actual interior temperature of
the sauna room in
o
C/
o
F
Temperature: Press to adjust the temperature setting
0
C/
0
F: Press to change the temperature display between
o
C/
o
F
1. Plug the sauna into the wall outlet.
2. Press the POWER button once. The POWER light will come on, the TIME DISPLAY
will show 90 (minutes), the TEMPERATURE DISPLAY will show 151
o
F / 66
o
C, and the
control panel will flash.
3. Press the up/down arrows under the TIME DISPLAY to adjust the amount of time you
want the sauna to remain on. Press the C/F button to choose between Celsius and
Fahrenheit. Press the up/down arrows under the TEMPERATURE DISPLAY to adjust
the temperature setting. Once you have set these adjustments to the desired settings,
press the START/WORK button. If you do not press the button for 5 seconds, the
control panel will stop flashing and the set-up values will be memorized. The WORK
and HEAT lights will now be on and the emitters will now be generating heat. You can
either pre-heat the sauna to the set temperature before entering or sit inside the sauna
as the temperature rises to the set temperature. Please keep in mind that you will
increase the time it takes for the sauna to reach the set temperature if you enter the
sauna room before it has reached the set temperature.
4. During your sauna session, set-up time will count down the minutes one by one. You
can use the up/down arrows to adjust the time. If you do choose to adjust the time, the
control panel will flash and the emitters will stop generating heat. Once you set the
time to the desired setting, then press the START/WORK button twice and the control
panel will stop flashing and heat will began coming from the emitters once again.
5. Heating times do vary. Generally, it will take approximately twenty to thirty minutes to
preheat the sauna to the average used temperature range of approximately 118
degrees Fahrenheit / 48 degrees Celsius. When the ambient temperature is low,
heating requires additional time. For the first few times of use, you may use 115
degrees Fahrenheit / 46 degrees Celsius as a reference starting point for a time period
of about 20 to 30 minutes (this represents the actual time you are in the sauna at the