Installtion manual for: Dimensions: D43.5"H46"L12 Bulb Type : E12 bulb not included Lamp Frame Weight (lbs) : 36.7 Total weight (lbs) : 48.
LD8801D43 D43.5.H46.Ll2 Frame Parts List SAFETY larning: IIAIB SURE THE ELECTRICITY TO THE IIRES YOU ARE IORKING ON IS SHUT OFF, BY EI1111lR RF.ll>VING THE FUSE OR TURNING OFF THE CIRCUIT BREAKER. Pl7 CAUTION - Before assad:lling the li&bting fixture, please read all instructicms carefully. - All :frame l crystal CXlll)(Dllts are ftasile, please ban:lle with care. - RecJdred aa,ly circuit : 110 - l!IJ'l/mk - 1.meled wires are "L• far live wire, "N• f
LD8801D43 D43.5'H46'L12 LD8801D43 D43.5'H46'L12 Step 1 Please use the parts list to ensure you are not missing any parts LD8801D43 IBl"t ZA ZB picture ''="' ·-- ·-· zc ES3 ZD -c===i ZE ZF Pl (��) � cg PARTS LIST Deacripticn Parts Number Qty 1 4.1" Crossbar 1 Canopy ring 1 121().4"�.6"nipple +loop Power Cord 79" SPr-1-18# Clear/Brown 1111.&"Crystal eyelet P2 I 121().4".i.l.6"nipple P'J cg 1111.&"Crystal eyelet P4 (] Cover @) P5 P6 05.3 ,.
LD8801D43 D43.5'H46'Ll2 part P19 P20 P21 picture (\ \__J 0 A � B � C D E F G H I y @� � � y � §@� J �-� "ll=� K ,€=� 7= L §@@ LD8801D43 D43.5'H46'Ll2 Description Parts Nmbar 121().4-•L62.6 Arm � 12J().4'•L69.3'+ 12J().3'*0.8'•2Arm � '"' '"' 03. 9 •HO. 6 Lamo body 1050-14#*1+ '"' 911-2 1050-14#*2 '"' +911-2. 5 1050-1411*5-5PCS+ 2024-1411+1050-1411 +911-2, 5 H 1050-14#*1+ 911-2" 1050-14#*1 +911-2. 5" 1050-14#*1 +911-2.
LD8801D43 D43.5.H46.Ll2 Frame Assembly Diagram IMPORTANT:Test sockets with bulb before dressing the fixture. 1. Attach the crossbar to the electrical box. 2. Pass the lamp wire and ground wire through the loop,canopy ring and center hole of canopy cover. 3. Screw2.S" nipple into the crossbar and fasten with hex-nut. 4. Pull wires up through the nipple. S. Screw loop only onto threaded pipe. 6. Hang the fixture on chain. 7. Make the electrical connections as detailed in the drawing above. 8.
LD8801D43 D43.5.H46.L12 Cleaning and Maintenance of Chandelier Frame The finish on our chandelier frames and fixture frames is protected by a durable coating of lacquer. To clean, use a clean, soft, dry cloth.Do not use any metal polishes, cleaners, abrasives or any substance which could remove the protective finish.Failure to follow these instructions automatically voids the guarantee.
LD8801D43 D43.5.H46.L12 Returns and Conditions of Warranty Returns must be pre-authorized by contacting our customer service department at the address on the reverse side.Returns will only be accepted with a written return merchandise authorization and return shipping charges pre-paid.We reserve the right to inspect all returned merchandise to fully determine the nature of any defect.