Contents Safety ................................................................................................................ 3 Environment .................................................................................................... 4 1 Getting Started .............................................................................................. 5 1.1 Getting to know your touch phone................................................... 5 1.2 Installing the SIM card and storage card ................
9.2 Alarm Clock .................................................................................. 31 9.3 Calculator......................................................................................
Safety Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of its use. As a general rule, always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to protect users and their environment. Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture.
manufacturers of such equipment will be able to give you any advice you may need in this area. Hospitals: Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff. Road safety: Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call. You must comply with any current legislation.
1 Getting Started 1.1 Getting to know your touch phone 1.2 Installing the SIM card and storage card You need to remove the back cover before you can install the SIM card and storage card. Also, you can remove and install the SIM card and storage card when the phone is turning on. To remove the back cover 1. Make sure your device is turned off. 2. Firmly hold the device with both hands and the front panel facing down. 3.
Note: To remove the memory card, press it to eject it from the slot. 1.3 Charging the Battery Your device comes with a rechargeable lithium-ion battery and is designed to use only manufacturer-specified original batteries and accessories. Battery performance depends on many factors, including network configuration, signal strength, and usage patterns. Warning: To reduce risk of fire or burns: • Do not attempt to open, disassemble, or service the battery pack.
Silent mode To silence your phone quickly, press & hold the – volume button to zero volume. Screen sleep After a period of inactivity, your screen will go to sleep (display will turn black). In sleep, your phone uses less battery power. You can control this behavior: Set screen timeout period and select Settings. 1. On the Home screen, touch 2. Select Display > Sleep. Select a time from the menu. Prevent sleep while charging and select Settings. 1. On the Home screen, then touch 2.
shortcuts as you like. 1. The Home screen actually extends beyond the screen width. On Home screen, slide your fingertip left and right along the screen to reveal the full width of the Home screen. This additional space gives you more room to customize Home with applications and shortcuts. 2. Create Home screen shortcuts: • On Home screen, touch & hold the blank screen to select ‘SHORTCUTS’.
there are four different options: square, squircle, circle and teardrop. 1.5 Status Icons Connection status icons Along the top of your phone screen is the status bar. On the left side, icons will appear, notifying you of a new message, upcoming calendar event, or something else you should notice. On the right side of the status bar, you’ll see connection status icons.
To open the message, reminder, or other notification, you can touch the items. To close the notifications window, slide your finger up the screen. If you are temporarily unable to handle some application notice, you only need to slide the notice until you see the clock icon. Click the clock icon to let this notice disappear from the notification bar temporarily, and then come back after set time.
2.2 Making a call > Phone to enter the dial screen. On Home screen, you can touch 1. Touch the on-screen dial pad to enter a number, touch ‘Delete’ button to delete numbers you’ve entered. Touch & hold to delete all the numbers in the field. To dial a call, touch ‘Call’ button (Green icon) to make a call. To end a call, touch ‘End’ button (Red icon). to show the call records, 2. On the dial screen, touch Call history tab select an entry listed in the log to call the number.
calls at any time, touch ‘Swap calls’. • If you don’t want to interrupt your call in progress, then touch ‘END’. 6. While on a call, you can start a conference call. Note that you can also have an additional caller on hold during a conference call, regardless of how many participants are on the conference. Note: Whether the group call function can be used depends on whether the network operator supports and provides such function as well as whether you have applied for such function.
Airplane mode Airplane mode on/off: When airplane mode is selected, all wireless connectivity will display in the status bar when airplane mode is is off. This icon selected. 3.2 Connected devices Bluetooth 1. Use this check box to turn Bluetooth services on or off. 2. With Bluetooth services on, you can touch Bluetooth to open the Bluetooth settings screen. 3.3 Apps & notifications Apps View all the applications stored on your phone and how much space they occupy.
3.5 Sound Volumes: Select to open the volume control, and then slide your finger along the volume bar to set an incoming call ring volume or alarm volume, playing back music, videos volume. Phone ringtones: Select to decide on a ring tone to use for incoming calls. Note that you can override this setting for individual contacts in the Edit contact details screens. Default notification sound: Select a ring tone to use for a notification (e.g., new message).
Date & time Set time, time zone, and date: Use Automatic unless you need to override the network values. Time format: Select from 12 or 24 hour formats. Developer options Developer options is invisible by default. Continuous touch the Build number several times to make it visible. If you are an application developer, you may be interested in these settings: USB debugging: If you want be able to communicate with your phone directly via USB, select ‘USB debugging’ check box.
This mirroring of information happens through over-the-air data synchronization, or data “syncing”. Data syncing occurs in the background and shouldn’t ever get in your way. Because sending large amounts of data back and forth over the air can take time and require considerable bandwidth, there are some settings on the phone that allow you to control data sync. Sync by application To control synchronization Contacts, you can do the following: and select Settings. 1. On the Home screen, then touch 2.
Pair & connect with Bluetooth devices Before your phone can communicate with a Bluetooth headset or hands-free car kit, the devices must “pair & connect”: 1. Make sure you have turned Bluetooth on. 2. Your phone starts scanning for Bluetooth devices within range. As they are found, the devices appear in the list of Bluetooth devices. 3. To pair with a device in the list, select it. 4. On the pair confirm dialog, select ‘Pair’. 5. Once paired, the device will connect automatically. 6.
matching contacts are appeared on the screen. From the Contacts screen, you can: 1. Go to Contact details: Select the contact’s name to open the Contact details screen, where all screen the information you’ve saved for this contact is displayed. 2. Take action on a contact: On the Contact details screen, you can view, call the contact’s number, send a text message, add remove a star or edit the contact details. 3. On the Contact details screen, press MENU to open the context menu.
you’ve stored for a contact, and to initiate other types of communication with that contact, open the Contact details screen. To open a contact’s details screen, simply select their name from Contacts. 1. Call a contact: From the contact list, touch the contact you want to open the Contact details screen. Touch the call number directly to dial that contact’s number. 2.
touch and select Messaging icon. About text and multimedia messages SMS messages are also known as “text” messages which can contain emoticons and can each be around 160 characters. If you continue to type after the limit is reached, your message will be delivered as one, but count as more than one message. These are called “concatenated” messages. MMS messages are also known as “multimedia” or “picture” messages and can contain text, emoticons, emotion Sticker, location, picture, audio, and video files.
touch & hold the individual message you want to delete to open the context menu, and then select ‘Delete’ icon. • Delete all messages in a thread - From the message list, you can also delete an entire thread from the message list by pressing & holding the thread, then touch ‘Delete’ icon on the top of the screen. • Delete all message threads - From the message list, press MENU, select the threads what you want to delete and then select ‘Delete’ icon. Compose text and multimedia messages 1.
To set text and multimedia message preferences, from the message list, press MENU and select ‘Settings’. 6.2 Email accounts Add an email account You can fetch messages from gmail, exchange, POP3 or IMAP accounts. Follow these steps: and select email application. 1. On the Home screen, then touch 2. The Set up new account screen appears. 3. Type your account email address and password. 4. Select ‘Next’. Follow the prompts to type the email server, protocol, and other account information yourself.
the message you want to delete. 3. Select ‘Delete’. 4. Your message is moved to the Trash. 6. Empty Trash: Once you’ve moved a message to the Trash, to empty messages in the Trash you should go to your Inbox, press MENU and select ‘Trash’ to enter the Trash. From the trash, touch ‘EMPTY TRASH NOW’. Note that the message is only deleted from your phone, not from the account server. 7. Remove an email account: You can always remove a email account from your phone.
number, infrastructure, and other objects through which the signal passes. 7.2 Browser To open the Browser, touch and select Browser applicaiton. The Browser always opens to the last Web page you were viewing. The first time you enter the Browser after powering on, your home page will display. You can change your home page by pressing MENU > Settings >General > Set homepage. The Browse screen From the Browse screen you can do the following: 1.
installed on your phone that supports sharing). 2. View bookmarked page: Touch & hold the bookmark you want to open. The context menu opens. Select Open or Open in new window. 3. Edit bookmark: Touch & hold the bookmark you want to e open. The context menu opens. Select ‘Edit bookmark’. The edit bookmark dialog box opens. Type your change and select ‘OK’. 4. Delete a bookmark: Touch & hold the bookmark you want to open. The context menu opens. Select ‘Delete bookmark’. You will be asked to confirm. 5.
Captured pictures are saved to the “DCIM” folder on the phone storage. Before you take a picture, wipe the sensor window to remove any small amounts of oil. and select Camera icon. 1. To open the Camera, on the Home screen, touch 2. The Camera opens in capture mode. Frame your picture within the screen and hold the phone steady. Touch Camera button to capture. Continue to hold the camera steady for a second after you hear the shutter sound. The picture you have captured is saved to Gallery application.
home screen wallpaper, lock screen wallpaper or both home screen and lock screen wallpaper. 4. Set as contact picture: In full-screen view, press MENU and select Set picture as. From the menu that opens, select Contact icon. Your contact list opens. Select the contact you want to associate with the picture. On the contact photo edit screen, drag the sizing spots of the cropper in or out to size. Touch & drag the cropper to move it within the picture. When you’re happy with the cropped area, select ‘SAVE’.
Load music onto yourPhone Storage Read the instructions below to add music to your phone storage. 1. Attach your phone to your computer using a USB cable that came in the box. Select ‘Transfer files’ check box on ‘Use USB to’ window. 2. On your computer, find the mobile deive and open the phone storage. 3. Open ‘Music’ folder and copy music files into it. If you want, create folders within “Music” to organize your music further.
the drive as required by your computer's operating system. Remove the USB cable from your phone and computer. Play back music At any level in your Library, touch & hold a listing (a song, artist, album, or playlist) to open the context menu. Select Play to begin play and go to the Playback screen. You can do the following using the Playback screen: 1. Shuffle songs: Shuffle plays songs in random order. Touch to toggle shuffle on and off. When the con is grey, shuffle is off. 2.
from this screen: Play, Edit (rearrange songs), Delete and Rename. Create ringtones from songs You can set any of your songs as a phone ringtone: 1. From the Library, navigate to a song you want to use as a phone ringtone. 2. Touch & hold the song in the list to open the context menu. 3. Select Use as phone ringtone. The ringtone is set as your default incoming call ringtone. 4. Now, when you go to Home > Settings > Sound, and select a phone ringtone, your song will be listed as an option.
Event details screen. • Type the event name that appears in Day view. • Type the location. • Select date & time. • Description can be as long as you like. • Select a calendar if you display more than one. • Set default repetition time. • Set a default reminder time. • Set online presence: available or busy. • Select calendar privacy from Default (as defined when calendar was created), Private, or Public. When finished, select ‘Done’. Pressing BACK also saves the event.
Ring tone: The current ring tone selection is shown. Select Ring tone to pick another ring tone that will play when the alarm rings. (When you select a ring tone, it plays briefly.) Note that when your alarm goes off, the ring tone will play for five minutes etc which you can set from Alarms menu . Vibrate: Select this check box to have your phone vibrate when it goes off. Once your alarm goes off, you will receive an alert with the options to Snooze (for 10 minutes etc.) or Dismiss.
Contenido Seguridad…………………………………………………………………………………………….................................3 Medio ambiente………………………………………………………………………………….................................4 1 Primeros pasos………………………………………………………………………………........................................5 1.1 Conozca su teléfono táctil …………………………………………………………….................................5 1.2 Instalación de la tarjeta SIM y la tarjeta de almacenamiento ……….................................5 1.3 Carga de la batería…………………………………………………….…………………............
La seguridad Nunca intente desmontar su teléfono. Usted solo es responsable de cómo usa su teléfono y las consecuencias de su uso. Como regla general, siempre apague su teléfono donde esté prohibido el uso de un teléfono. El uso de su teléfono está sujeto a medidas de seguridad diseñadas para proteger a los usuarios y su entorno. No use su teléfono en áreas húmedas (baño, piscina ...). Protéjalo de líquidos y otra humedad.
Hospitales: siempre asegúrese de que su teléfono esté apagado en los hospitales cuando así lo indiquen las señales de advertencia o el personal médico. Seguridad en la carretera: no use su teléfono mientras conduce. Para prestar toda su atención a la conducción, deténgase y aparque de forma segura antes de realizar una llamada. Debe cumplir con la legislación vigente.
2. Sostenga firmemente el dispositivo con ambas manos y el panel frontal hacia abajo. 3. Empuje la cubierta posterior hacia arriba con los pulgares hasta que se desenganche del dispositivo y luego deslícela hacia arriba para extraerla. Para instalar la tarjeta SIM La tarjeta SIM contiene su número de teléfono, detalles del servicio y la agenda / memoria de mensajes. Su dispositivo es compatible con tarjetas SIM 2G, 3G (WCDMA). 1. Retire la cubierta posterior si está instalada. 2.
• No exponga a temperaturas superiores a 60 ° C (140 ° F). • Reemplace solo con el paquete de baterías designado para este producto. • Recicle o deseche la batería usada según lo estipulado por las reglamentaciones locales. Las baterías nuevas se envían parcialmente cargadas. Antes de comenzar a usar su dispositivo, se recomienda que instale y cargue la batería. Algunas baterías funcionan mejor después de varios ciclos completos de carga / descarga.
Evite dormir mientras se carga 1. En la pantalla de inicio, toque y seleccione Configuración. 2. Seleccione la casilla de verificación Sistema> Opciones de desarrollador> 'Permanecer despierto'. Bloquear pantalla y poner el teléfono a dormir Excepto cuando en una llamada telefónica, desde cualquier pantalla, presione ENCENDIDO (inmediatamente). Mientras no esté en una llamada, para bloquear sus botones de control y pantalla de activación táctil accidental, presione ENCENDIDO.
• Toque sin soltar para seleccionar un acceso directo a la aplicación, un acceso directo a parte de su información guardada (como una lista de reproducción) para su pantalla de inicio. Puede colocar el atajo deslizando la punta del dedo hacia la derecha a lo largo de la pantalla para revelar el ancho de la pantalla de Inicio. • La aplicación, el acceso directo y la carpeta aparecen en la pantalla de inicio. 3.
Network signal E:GSM SINCRONIZANDO DATOS 3G:WCDMA REGRESO DE LLAMADA CANCION ESTA ACTIVA LLAMADA PERDIDA WLAN service connected SMS/MMS LLAMADA EN PROCESO ALARMA MODO DE AVION SONIDO APAGADO MUTE BLUETOOTH ESTA ENCENDIDO BATERIA ESTA BAJA AURICULAR CONECTADO BATERIA CARGANDO Lee tus notificaciones Cuando vea una notificación en la barra de estado, toque la barra y deslice su dedo hacia abajo en la pantalla para abrir la lista de notificaciones que se muestra en la ventana deslizante.
En muchos países, la ley le exige que apague el teléfono mientras está a bordo de un avión. Otra forma de desactivar la función del teléfono es cambiar su dispositivo al Modo avión. Cuando habilita el modo avión, todas las radios inalámbricas de su dispositivo se apagan, incluida la función del teléfono, Bluetooth y WLAN. 1. Toca> Configuración> Red e Internet. 2. Toca 'Modo avión' para habilitar o deshabilitar.
Mientras está en una llamada, revele las opciones de llamada entrante: Altavoz, Silencio, En espera, Fin. Tenga en cuenta que si los servicios Bluetooth están activados y está conectado a un dispositivo de manos libres, el indicador de menú más mostrará Bluetooth activado. 1. Altavoz: para usar el altavoz, seleccione 'Altavoz'. Para apagarlo, selecciónelo de nuevo. La barra de estado mostrará el icono cuando el altavoz esté encendido. 2.
2.6 Configuraciones de llamada En la pantalla de marcación, presione MENÚ> Configuración para ingresar al menú de configuración de Llamadas, puede realizar la operación de configuraciones de llamada y configuraciones generales. 3 Configuración en su dispositivo Controla la configuración de todo el teléfono desde la pantalla de configuración de Inicio: toca y selecciona Configuración. 3.1 Red e Internet Wifi 1. Seleccione esta casilla de verificación si prefiere usar Wi-Fi para su conexión de datos. 2.
2. Desinstalar: si descargó una aplicación de Market, podrá desinstalarla de esta pantalla seleccionando Desinstalar. Puntos de notificación En la pantalla de aplicaciones y notificaciones, toque Notificaciones y seleccione la casilla de verificación 'Permitir puntos de notificación', luego los puntos de notificación se mostrarán en la pantalla de inicio para todas las aplicaciones.
Ver y administrar el almacenamiento de datos en su teléfono. 3.7 Seguridad y ubicación Google Play Protect: comprueba regularmente sus aplicaciones y dispositivos en busca de comportamientos dañinos. Se le notificará de cualquier riesgo de seguridad encontrado. Patrón de desbloqueo de pantalla: crea un patrón que se te pedirá que dibujes antes de que tu pantalla se desbloquee. Puede seleccionar que el patrón sea visible o invisible a medida que lo dibuja.
Sobre el teléfono Ver el estado de su teléfono: esta pantalla muestra una variedad de información, incluyendo su número de teléfono, la red que está usando actualmente, el tipo de red, la intensidad de la señal, si está en roaming o no, cualquier dirección WLAN a la que esté conectado, y Más. Vea el número de modelo y la información de versión para su teléfono. 4 ActiveSync 4.1 Sincronización de datos Algunas aplicaciones en su teléfono (Contactos, etc.
Puede usar Bluetooth para enviar y recibir llamadas usando un auricular o un kit manos libres para el automóvil. Encienda los servicios Bluetooth 1. En la pantalla de inicio, toque y seleccione Configuración. 2. Seleccione Dispositivos conectados, y luego seleccione la casilla de verificación 'Bluetooth' para activar los servicios Bluetooth. Cuando está activado, el icono de Bluetooth aparece en la barra de estado. 3.
Notas: El teléfono solo admite los auriculares y los perfiles Bluetooth manos libres, por lo que si intenta conectarse a un dispositivo que no es un audífono o un kit de manos libres para automóvil, recibirá un mensaje de "no se puede conectar". Si empareja con un segundo auricular mientras está conectado al primero, el primer auricular permanecerá conectado. Para cambiar la conexión al segundo auricular, debe seleccionar manualmente ese auricular nuevamente después del emparejamiento.
4. Puede asignar un ícono de identificación de llamada a su contacto tocando el icono de identificación de llamada. Se abre la aplicación Imágenes. Navega hasta una imagen y selecciónala, dimensiona el recortador con tu dedo. Cuando termine, seleccione 'GUARDAR'. La imagen está asociada a tu contacto. Si no asigna un ícono, se le asignará un icono predeterminado de Android. 5. Para guardar su contacto, toque el ícono 'GUARDAR'.
Importador de contactos SIM Si ha almacenado nombres y números de teléfono en su tarjeta SIM, puede agregarlos a los Contactos almacenados en su teléfono al seleccionar esta opción de configuración.
1. Para ver detalles sobre un mensaje en particular, en la vista Lectura, mantenga presionado el mensaje para abrir el menú contextual. Seleccione Ver ícono de detalles. 2. Responder a un mensaje: simplemente comience a escribir su mensaje en el cuadro de texto en la parte inferior de la pantalla para responder a un mensaje. Siempre puede presionar el ícono '+' y seleccionar un archivo adjunto para convertirlo a un mensaje multimedia. Seleccione el icono 'Enviar' cuando esté listo. 3.
5. Seleccione 'Enviar' cuando esté listo. También puedes guardar un borrador. 6. A medida que su mensaje se envía, se muestra el progreso. Si ve este ícono a la derecha del mensaje, significa que su mensaje aún se está entregando. Guardar mensaje como borrador Al componer, presione ATRÁS, su mensaje se guarda automáticamente como borrador.
4. Componer nuevo Desde la Bandeja de entrada: 1. Presione el ícono 'Redactar'. 2. Agregue destinatarios escribiendo un nombre o una dirección en el campo 'Para'. Aparecerán contactos coincidentes. Seleccione el destinatario o continúe escribiendo la dirección. Agregue tantos como desee. 3. Escriba un asunto y mensaje. 4. Seleccione 'Enviar', o presione Menú y seleccione 'Guardar borrador' o 'Descartar'. Al presionar ATRÁS también se guardará como borrador a menos que no haya tecleado nada. 5.
7. Eliminar una cuenta de correo electrónico: siempre puede eliminar una cuenta de correo electrónico de su teléfono. Vaya a su Bandeja de entrada, presione MENÚ y seleccione 'Configuración'. Toca la cuenta para abrir la pantalla de configuración de la cuenta. Presiona Menú y selecciona Administrar cuentas. En la pantalla Usuarios y cuentas, toque la cuenta que desea eliminar y luego seleccione ELIMINAR CUENTA. Se le pedirá que confirme antes de que se elimine la cuenta.
Desde la pantalla Examinar puede hacer lo siguiente: 1. Vaya a una página web: asegúrese de que el foco no esté en un cuadro de texto y luego comience a escribir la URL. 2. Agregue un marcador: marque la página web que está viendo actualmente: • Presione MENÚ y seleccione 'Guardar en favoritos'. • Confirme la URL y el nombre, y luego seleccione 'Aceptar'. • Para ver todos sus marcadores, presione MENÚ y seleccione Marcadores / Historial. 3.
5. Establezca el marcador como página de inicio: toque y mantenga presionado el marcador que desea abrir. El menú contextual se abre. Seleccione 'Establecer como página de inicio'. El marcador seleccionado se establecerá como página de inicio. Configura tu página de inicio Establece su página de inicio desde la pantalla Configuración: 1. Presione MENÚ y seleccione Configuración. La pantalla de Configuración se abre. 2.
1. Para abrir Imágenes, en la pantalla de inicio, toque y seleccione el icono de Galería. 2. Dependiendo de la cantidad de imágenes que haya almacenado, es posible que tarden unos minutos en cargarse. 3. Si almacenó sus imágenes en carpetas en su tarjeta de memoria, las carpetas se mostrarán como "álbumes" por separado. El álbum superior izquierdo siempre contiene todas las imágenes en todos los álbumes. 4. Las imágenes individuales se muestran en una cuadrícula en formato de miniatura.
5. Cortar una imagen: en la vista de pantalla completa, presione MENÚ y seleccione Recortar. En la pantalla de edición de la imagen, arrastre el borde del recortador hacia adentro o hacia afuera al tamaño. Toque y arrastre el centro del recortador para moverlo dentro de la imagen. Cuando esté satisfecho con el área recortada, seleccione 'GUARDAR'. Presione ATRÁS para cancelar el recorte. La imagen recortada se guarda en la Galería. 6.
Nota: Si no desea que aparezca un tono de llamada en su Biblioteca de música pero desea que esté disponible como tono de llamada, y luego copiar música en la carpeta "Tonos de timbre", "Notificaciones" o "Alarmas" fuera de su "música" carpeta. 5. Cuando termine de copiar, retire el cable USB de su teléfono y computadora. Cargue música en su tarjeta de memoria Lea las instrucciones a continuación para agregar música a su tarjeta de memoria. 1.
3. Vaya a cualquier punto de la canción: deslice la punta del dedo en la barra de progreso al punto deseado en una canción. 4. Control de reproducción: de los iconos de izquierda a derecha: vaya a la canción de inicio, Pause / resume play y Go to next of song. Si se está reproduciendo una canción mientras está en la pantalla de la Biblioteca, puede cambiar rápidamente a la pantalla de Reproducción seleccionando la barra de canciones inferior.
3. Seleccione Usar como tono de llamada del teléfono. El tono de llamada está configurado como tono de llamada entrante predeterminado. 4. Ahora, cuando vaya a Inicio> Configuración> Sonido, y seleccione un tono de llamada, su canción aparecerá como una opción. Eliminar música de la tarjeta de memoria Toda la música que reproduce en su teléfono se almacena en el almacenamiento del teléfono o en la tarjeta de memoria insertada. Desde su teléfono, puede eliminar la música almacenada en la tarjeta: 1.
• La descripción puede ser el tiempo que desee. • Seleccione un calendario si visualiza más de uno. • Establecer el tiempo de repetición predeterminado. • Establecer un tiempo de recordatorio predeterminado. • Establecer presencia en línea: disponible u ocupado. • Seleccione la privacidad del calendario de Predeterminado (como se definió cuando se creó el calendario), Privado o Público. Cuando termine, seleccione 'Listo'. Presionar ATRÁS también guarda el evento.
selecciona un tono de llamada, se reproduce brevemente). Tenga en cuenta que cuando suena la alarma, el tono de llamada se reproducirá durante cinco minutos, etc., que puede configurar desde el menú Alarmas. Vibrar: Seleccione esta casilla de verificación para que su teléfono vibre cuando se apaga. Una vez que se active la alarma, recibirá una alerta con las opciones para Posponer (durante 10 minutos, etc.) o Descartar.
SAR The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.