Product Type:Goki SmartProducts Tested Model:G1
Please read the manual carefully before installation and keep this manual at a secure place ● Please refer to sales agents and professionals for information not included in this manual. For more support, please call +61 02 8321 0121 ● We reserve the right to upgrade the product without prior notice. Care & Maintenance 1Please keep the SmartLock away from corrosives. 2Please recharge batteries when you receive a low power notification on the staff application.
Packing List Absorbers Locks SmartDisc Parameters Communication method: Bluetooth 4.1ble Supporting systems: Android 5.0/IOS7.0 Stand-by current: ≈35μA Operating current: ≈200 mA Power supply: Lithium Ion 1150 MAH Unlock time: ≈1.
Installation
Manual Two ways are available for deleting Bluetooth Administrator/resetting to default mode A.If the lock already has a Bluetooth Administrator, the administrator can delete the lock on the App when he is near the lock. B.Long press Reset Button on the lock for 3 seconds till two short beeps are heard. 2.Add Bluetooth Administrator To add a Bluetooth Administrator to a lock that is in default mode, touch the keypad to activate the lock. When the backlights are on, add administrator on the App. 3.
Manual 4.Two ways to unlock with App A.When [Touch to Unlock] feature is on and user’s app is activated, user can unlock by touching and lightening up the keypad of the lock. B.Press the Unlock/Lock icon on the App. A long beep indicates unlocking successful. 5.Lock A.Long press“#”on the keypad of the lock till two short beeps are heard. B.Long press the Unlock/Lock icon on the App. C.When Auto Lock feature is on, the lock locks automatically in pre-set time. Notice: The default mode of Auto Lock is off.
Manual 6.Edit user passcode Input [*10#original passcode#new passcode#new passcode#] on the keypad to edit passcodes. A long beep indicates editing successful and 4 short beeps mean editing unsuccessful. 7. Ways to set Auto Lock A.Input [*21#Admin Passcode#Auto Lock time out(0, 5999 seconds)#] to set Auto Lock. If“0”is set as the time out, Auto Lock is disabled. Other numbers mean the time the lock will automatically lock after it is unlocked. The default mode of Auto Lock is off. B.
Manual 9.Keypad lock The keypad will be disabled for 5 minutes after 5 consecutive trials of wrong passcode. During the lockout period, the light will flash quickly after each pressing. Unlocking with App is still functional in this case, and the keypad will be back to normal once the lock is unlocked successfully with an App. The keypad will be reactivated after 5 minutes’lockout period, and user can continue to input passcode. However, each wrong passcode trial will result in 5 minutes’ lockout.
Manual (No APP 10.Edit default Admin Passcode Before an administrator is added to the lock, default Admin Passcode is 123456 Input [*12#default Admin Passcode#new passcode#new passcode#] to edit Admin Passcode. A long beep indicates editing successful and 4 short beeps mean editing unsuccessful. 11.Add Unlocking passcode Input [*85#Admin Passcode#new passcode#new passcode#] to add a new unlocking passcode. A long beep indicates adding successful and 4 short beeps mean adding unsuccessful. 12.
Please read the manual carefully before installation and keep this manual at a secure place ● Please refer to sales agents and professionals for information not included in this manual. For more support, please call +61 02 8321 0121 ● We reserve the right to upgrade the product without prior notice. Care & Maintenance 1Please keep the SmartDock away from corrosives. 2Please recharge batteries when you receive a low power notification on the staff application.
Packing List SmartDock Battery Modules Parameters
Smarter Hostels, Happier Guests.
FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.