Gogoro B01 Electric Pedal Assist Bicycle User’s Manual Manufacturer: Gogoro Taiwan Limited Address: 11F, Building C, No.225, Sec. 2, Chang’an E. Rd., Songshan Dist., Taipei City 105, Taiwan Tel:03-2730900 Version：190701 Series (Model): B01 Copyright© 2019 Gogoro Taiwan Limited All rights reserved. Any portion of this user’’s manual shall not be forwarded, reproduced or copied in any form unless a prior written consent is received from Gogoro Taiwan Limited.
Contents 1. Before You Hit the Road 2 1.1 Safety notice 2 1.2 Names and functions 4 2. Before the First Ride 5 2.1 Open the box 5 2.2 Check content 6 2.3 Basic installation and adjustment 7 2.3.1 Handle bar settings 7 2.3.3 Pedal installation 8 2.3.4 saddle height settings 8 2.3.5 Take out the charging stand. 9 2.4 Wake up your Gogoro B01 and charge the battery 2.5 APP Setting 9 10 2.5.1 Download and install the Gogoro Smartwheel APP 10 2.5.
11. Specification 24 12. Legal Documentation 26 1. Before You Hit the Road Welcome to your new Gogoro B01 electric pedal assist bicycle! Let us walk you through the right steps to operating your B01 safely and maximize your riding experience. Please read this guide carefully before you hit the road and make sure you meet all of the following requirements: ● You fully understand how to correctly operate the Gogoro B01.
● ● ● ● The braking distance might increase under wet weather and road condition. The A-weighted emission sound pressure level at the driver ears is less than 70 dB(A) Do not use bicycle trailer / child-seat / bicycle carrier with this product. Contact Gogoro designated service center if maintenance or repairs are needed. Warning: This product is not for off-road purpose. Incorrect use might lead to parts damage or personal injury.
1.2 Names and functions No. Name No.
2. Before the First Ride 2.1 Open the box ● ● ● Pinch and pull out the four fixers around the bottom of the box. Lift up the outer sleeve. Take out quick start guide, user manual, tool set and accessories from the bottom compartment, and charger from the side compartment.
2.2 Check content Please check the content when you first open the box of this B01. ○ Gogoro B01 ○ Quick Start Guide ○ User manual ○ Charging set ■ Stand Charger * ■ Regular Charger * ■ AC cable ○ Pedals x2 ○ Tool set ■ T45 Torx wrench ■ 8 mm Hex wrench ■ Phillips screwdriver ○ Accessories ■ Spoke reflector x6 ■ Pedal reflector x4 ■ Frame reflector x2 ■ Bell * ■ Lights* x2 * The content might be different according to model and country.
If anything on the list is not in the box, please consult your local dealer, or contact Gogoro via the Gogoro Smartwheel APP or website. 2.3 Basic installation and adjustment Some basic installation and adjustment must be done before this B01 can function: 2.3.1 Handle bar settings ● ● Straighten the stem and handle bar.
2.3.3 Pedal installation ● Install pedals. ○ Use 8 mm hex wrench ○ Torque: 20 Nm Please note that the left pedal has left-handed thread, please turn counter-clockwise to tighten it. The right pedal is on the opposite. 2.3.4 Saddle height settings ● ● ● We provide 5 different lengths of seatposts. Please contact Gogoro via the Gogoro Smartwheel APP or website if necessary, and choose a proper length to fit your needs.
Warning: Do not pull the seatpost beyond the Minimum insertion line. 2.3.5 Take out the charging stand. ● Take out the charger from the side compartment 2.4 Wake up your Gogoro B01 and charge the battery During shipping and storage, the Gogoro B01 might be under “Hibernation mode” and cannot be turned on and function. Please do the following procedure to wake it up. ● ● ● Connect AC wall outlet and charger. Put charger vertically on Gogoro B01 to initial charging.
Note: If LED is still silent, means something is wrong, check the connection between charger and AC outlet. Unplug and then replug vertically . Warning: Plug and unplug the charger connector vertically and gently. Applying excessive force on the connector with improper angle might damage the hardware. Warning: When the battery is left to be at a low level of charge for too long, it can become damaged.
● You can download Gogoro Smartwheel APP by scanning the following QR code: ● iOS platform: Requires iOS 11.0 or later. Please download from the QR code or Apple iOS APP Store. Android platform: Requires Android 6.0 or later. Please download from QR code or Google Play APP Store. ● Note: Some smartphones might not be able to download or install the APP properly due to compatibility issue.
2.5.3 Pair the Gogoro B01 with your account ● ● ● Make sure your smartphone is connecting with internet, and Bluetooth is on. Launch Gogoro Smartwheel APP on smartphone. Once you have signed in the APP with your Gogoro account, follow the instruction of the APP: ○ Scan the QR code on the rear hub, pair the Gogoro B01 with your phone and account.
3. Unlock, Turn on and Ride 3.1 Unlock it and turn it on ● ● ● ● Use paired smartphone APP, long press to unlock and turn on Gogoro B01 When motor is on, it will flash LED to notify user. All settings and adjustments can only be controlled by smartphone APP. Ride like a normal bicycle, and the assistance kicks in. 3.2 Assist power adjustment 3.2.1 Electric assistance is triggered by pedaling ● The torque output is in proportion to your pedal input force.
3.2.2 Assistance level adjustment ● You can adjust several assist level of power assist on APP. ○ Swipe up to add more power. ○ Swipe down to reduce power. ○ The higher level gives you more and helps you conquer steep hills. ○ The lower power assist level can be used for riding on flat roads when minimal assistance is needed and has less battery consumption. ○ The lowest level will shut off the assist power, and you can still ride it like a normal bicycle.
Note: The range of assistance depends on user’s weight, riding pattern, slope and condition of the road, assist level etc.. Warning: Internal sensors might be affected by strong magnetic field. Please keep magnets away from the motor. 4. Turn off and Lock 4.1 Manually turn it off Please turn the Gogoro B01 off and lock it when you leave the bike, to minimize the risk of theft. ● ● ● ● Long press on the phone APP to turn off the Gogoro B01.
4.2 Auto lock ● ● When Gogoro B01 is not moving, there’s no smartphone BLE link, for a period of time (5 / 10 / 15 min / OFF, APP adjustable), Gogoro B01 enters “Locked Mode”. Default is OFF, user needs to enable it via phone APP. 5. Charging ● ● ● Always charge the battery to full level when B01 is not in use. ○ Connect AC wall outlet and charging stand. ○ Put charger on Gogoro B01 to initial charging. ○ The LED on the charger should be green.
Warning: Always connect the charger both to the wall AC outlet and B01. NEVER leave B01 on the charging stand without connecting to wall AC outlet, or the battery will drain faster than expected. Note: The operating temperature range of Gogoro B01 is 0。c ~ 40。c ,or it might become abnormal. 6. Hibernation Mode ● ● ● When Gogoro B01 battery level is too low, the system will activate hibernation mode to protect the battery. Under hibernation, B01 will no longer respond to APP command.
Adjustment of the transmission belt needs special tools and knowledge and is not self-serviceable, please contact us on the Gogoro Smartwheel APP or website if necessary. ● ● ● ● ● ● ● If the batteries still have sufficient power for your trip. If the braking system is working normally. Check the wear of brake pads. Check appropriate spares, i.e. tires, tubes, and brake friction-components. Check and tighten screws if necessary.
Warning: When the battery is left to be at a low level of charge for too long, it can become damaged. Please connect the charger and keep the battery fully charged when you are not using the Gogoro B01. Warning: In order to protect the battery from damage by over-discharge, be sure to charge the battery to full level before you store of ship the Gogoro B01, and charge the battery at least once per month. Warning: Always connect the charger both to the wall AC outlet and B01.
● Adjust saddle placement to fit your body geometry. ○ Use 5 mm hex wrench to loosen the screws underneath the saddle rails. ○ Adjust position and angle of the saddle, then tighten the screws. ○ Torque: 5 mm - 9.2 Nm. 8.3.2 Transmission belt tension adjustment ● Proper tension is essential for optimum operation of Gates Carbon Drive System. ○ Use 5 mm hex wrench to loosen screws of dropouts (2 screws each side, both sides).
8.3.3 Brake lever setting ● Rotate the barrel adjuster on the lever to properly set the cable tension. When you pull the brake levers, they should be about 1 ½ inches (3.8 cm) away from the grip on the handlebars. If the levers hit the handlebars when you pull them, the brake cables are too loose. 8.3.4 Torque values for threaded fasteners ○ ○ ○ ○ ○ ○ ○ ○ Handle bar: T45 Torx - 15 Nm. Seatpost clamp: 4mm hex - 10 Nm. Screw underneath the saddle: 4mm hex - 10 Nm.
Gogoro B01 doesn’t respond to APP operation. 1. Gogoro B01 is under hibernation mode or the battery level is too low. 2. The bluetooth connection between your smartphone and Gogoro B1 is invalid. 3. System error. 1. Check if the LED on motor is ON or you need to connect Gogoro B01 to the charger until fully charged ideally, then unplug it and replug. 2. Please restart the APP or your smartphone, then try again. 3. Plug and unplug charger on Gogoro B01 to reboot system.
I want to change the default unit of measurement? Go to the Menu page > Settings > Unit of Measurement I want to optimize my riding experience? Smartwheel™ is an AI product that will get smarter over time the more it gets to know you. In order to ensure the best riding experience possible, please make sure that: 1. You fill in all of the information on Profile page 2.
10. LED Signal List Charger LED Event Hub LED (Blue) Red Green Off On General Respond to APP input (Unlocking, change setting) FOTA proceeding / data transmitting Responding (Quick Flash 3 times) Snooze (2 short flash, 1 sec off) Riding Battery >20% On Battery Low =< 20% Slow flash Motor derate to zero output (overheat, SOC too low etc.
11. Specification Classification Item Frame Fork Bike Motor Phone connection Battery Charger Specification Carbon fiber Stem Aluminium Handle bar 31.8 mm, carbon fiber Seatpost 31.6 mm aluminum with carbon fiber surface Brakes Fr. Disk / Rr. V-Brake Transmission Belt, Gates Carbon Drive CDX-11M-113T-12CT Gear option Single speed Chainring Gates FC300 170BP 50CDX +1/45.5 NG 50T Flywheel Gates CT1120SMN 20T Wheel set 700-28C, carbon fiber rim Weight 12.
Safety reference EU: CB (EN60335-1/ 60335-2-29); CE mark/ EMC(EN55014) US：UL1310 JP: PSE ( J61558-1 or J60335) TW: CNS15425-1 26
12. Legal Documentation 根據 NCC 低功率電波輻射性電機管理辦法規定： 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自 變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時 ，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無 線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干 擾。 Federal Communications Commission (FCC) Statement 15.19 This device complies with Part 15 of the FCC Rules.
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC Industry Canada Statement This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
