迅丽TTL机顶闪光灯 Thinklite TTL Camera Flash For Fuji INSTRUCTION MANUAL 说 明 手 册 中英文双语 / Chinese English Bilingual 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 在使用本产品之前: 地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层 请先仔细阅读本手册,以确保您能安全使用。请保存好本手册以备将 1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 来查询参考。 邮箱/E-mail: godox@godox.com http://www.
• This table only lists the tested camera models, not all Fuji cameras. For the Foreword compatibility of other camera models, a self-test is recommended. • Rights to modify this table are retained. Thank you for purchasing this product. This TT350F camera flash applies to FUJI series cameras and is compatible with TTL autoflash. With this TTL compatible flash, your shooting will become simpler. You can easily achieve a correct flash exposure even in complex light-changing environments.
Contents 25 Foreword 25 Compatible Camera Models 26 Warning 29 Name of Parts Body Control Panel LCD Panel What's in the Box of TT350F? Separately Sold Accessories 31 Attaching to a Camera 32 Power Management 32 Flash Mode: TTL Autoflash FEC (Flash Exposure Compensation) High-Speed Sync Second-Curtain Sync 34 Flash Mode – M: Manual Flash 35 Flash Mode – Multi: Stroboscopic Flash 37 Wireless Flash Shooting: Radio (2.
● LCD Panel Name of Parts (1) TTL Autoflash Zoom : zoom display (Page 43) Focus length (Page 43) TTL : TTL autoflash 01 02 03 09 04 05 06 : Flash exposure compensation (Page 33) (2)M Manual Flash Flash exposure compensation amount M : Manual flash 07 10 Manual flash output (3)Multi Flash 08 ● Body Multi : Stroboscopic flash 06. Hotshoe 01. Catchlight Panel 02. Built-in Wide Panel 07. LCD Panel 03. Flash Head 08. Lock Ring 04. Optic Control Sensor 09. Battery Compartment 05.
● What’s 1. Flash unit in the Box of TT350F? 2. Mini stand 3. Protection case 4. Diffuser Power Management 5. Instruction manual ● Separately Sold Accessories The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: X1T-F wireless flash trigger, Mini softbox, White & Silver reflector, Honeycomb, Color gels, Snoot, etc. Use Power Switch to power the flash unit on (Long press the button for one second) or off.
FEC: Flash Exposure Compensation With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops. It is useful in situations where minor adjusting of the TTL system is needed based on the environment. Setting FEC: MODE ZOOM SYNC 1 SLAVE SET 2 Press the SET Button and the flash exposure compensation amount will be highlighted on the LCD panel. Turn the Select Dial to set the amount. ● “0.3”means 1/3 step, “0.7”means 2/3 step.
Flash Output Range The following table makes it easier to see how the stop changes in terms of f/stop when you increase or decrease the flash output. For example, when you decrease the flash output to 1/2, 1/2-0.3, or 1/20.7, and then increase the flash output to more than 1/2, 1/2+0.3, 1/2+0.7, and 1/1 will be displayed. 3 MODE ZOOM SYNC SLAVE SET Figures displayed when reducing flash output level 1/1-0.3 1/1-0.7 1/2+0.7 1/2+0.3 1/1 1/2-0.3 1/2-0.7 1/4+0.7 1/4+0.
Wireless Flash Shooting: Radio (2.4G) Transmission ● You can set up three slave groups for TTL autoflash shooting. With TTL autoflash, you can easily create various lighting effects. ● Any flash settings for the slave units on the master flash in TTL mode will be automatically sent to the slave units. So the only thing you need to do is to set the master unit for each slave group without any operation for the slave units at all during the shooting.
3 4 5 MODE ZOOM SYNC SLAVE Check the communication channel ● If the master unit and slave unit(s) are set to a different channel, set them to the same channel. (Page 38) Position the camera and flashes ● Position the camera and flashes as the picture shows. (Page 40) Check the flash operation ● Press the master unit’s Test Button< >. ● Then, the slave unit will fire. If not, adjust the slave unit’s angle toward the master unit and distance from the master unit.
Wireless Multiple Flash Shooting You can divide the slave units into two or three groups and perform TTL autoflash while changing the flash ratio (factor). In addition, you can set and shoot with a different flash mode for each firing group, for up to 3 groups. Position Effective Range Center 0.6~4m Periphery 0.6~2.5m Bounce Flash ● Auto Shooting with Two Slave Groups A B By pointing the flash head toward a wall or ceiling, the flash will bounce off the surface before illuminating the subject.
● Point the flash head straight ahead and then upward by 90°. The catchlight will not appear if you swing the flash head left or right. ● For best catchlight effect, stay 1.5m/4.9ft away from the subject. ZOOM: Setting the Flash Coverage and Using the Wide Panel The flash coverage can be set automatically or manually. It can be set to match the lens focal length from 24 to 105mm (135 format) /16 to 56mm (APS).
Number of flashes that will activate over-temperature protection: Technical Data Power Output Level Number of Flashes 1/1 30 Model 1/2 +0.7 40 • Type 1/2 +0.3 50 1/2 60 1/4(+0.3,+0.7) 100 1/8(+0.3,+0.7) 200 1/16(+0.3,+0.7) 300 1/32(+0.3,+0.7) 500 1/64(+0.3,+0.7) 1000 TT350F Compatible Cameras FUJI cameras (Please reference to compatible camera models) Guide No.
Troubleshooting Maintenance If there is a problem, refer to this Troubleshooting Guide. ● Shut down the device immediately should abnormal operation be detected. The Camera Flash cannot be charged. ● Avoid sudden impacts and the product should be dedusted regularly. ● The battery is installed in the wrong direction. →Install the battery in the correct direction. ● The camera flash’s internal battery is exhausted. →If < > appears and blinks on the LCD panel, replace the battery immediately.