TTL 无线引闪器 TTL Wireless Flash Trigger 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong Town, Baoan District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.
Contents 24 Foreword Foreword 25 Warning 26 Names of Parts Flash Exposure Compensation Settings Multi Flash Settings Body (Output Value, Times LCD Panel 28 28 and Frequency) Battery Modeling Lamp Settings flashes with X system e.g. camera flash, outdoor flash, and studio flash. Featuring multi-channel triggering, stable signal transmission, and sensitive reaction, it gives photographers unparalleled flexibility and control over their strobist setups.
Warning Names of Parts Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. Always keep this product dry. Do not use in rain or in damp conditions. Keep out of reach of children. Do not use the flash unit in the presence of flammable gas. In certain circumstance, please pay attention to the relevant warnings. Do not leave or store the product if the ambient temperature reads over 50℃.
Battery Names of Parts AA alkaline batteries are recommended. Installing Batteries As shown in the illustration, slide the battery compartment lid of the flash trigger and insert two AA batteries separately. Battery Indication Check the battery level indication on the LCD panel to see the remaining battery level during the usage.
Using the Flash Trigger Using the Flash Trigger 1.2 Long press the button to set channel, group, mode and parameters (refers M M Zoom mm to the contents of “Setting the Flash Trigger”). 1.3 Turn on the camera flash, press the CH19 SLAVE A wireless setting button and the < > wireless 1/128 icon and slave unit icon will be < > displayed on the LCD panel. Press the Zm/C.
Setting the Flash Trigger Using the Flash Trigger 4. As a Flash Trigger with 2.5mm Sync Cord Jack Operation method: 4.1 The connection method please refers to the contents of “As a Wireless Studio Flash Trigger” and “As a Wireless Shutter Release”. 4.2 Set the transmitter end’s sync cord jack as an output port. Operation: press the
Setting the Flash Trigger Setting the Flash Trigger Wireless ID Settings Magnification Function Change the wireless channels and wireless ID to avoid interference for it can only be triggered after the wireless IDs and channels of the master unit and the slave unit are set to the same. button to back to multi-group. Press the
Setting the Flash Trigger Setting the Flash Trigger Flash Exposure Compensation Settings 1. 6. Until all the amounts are set. Or during any value setting, short press the 7. In the multi flash setting submenu, short press the button to return to button to exit the setting status. No values will blink. Multi-group displays in the TTL mode 1.1 Press the group button to choose the group, turn the select dial, and the FEC main menu when no values are blinking.
Setting the Flash Trigger Setting the Flash Trigger ZOOM Value Settings Sync Socket Settings Short press the button and the ZOOM value will CH1 be displayed on the LCD panel. Choose the group and turn the button again to back to the main menu. A B C D E Note: The flash’s ZOOM should be set to Auto (A) mode before Zm/CH the select dial, and the ZOOM value will change from AUTO/24 to 200. Choose the desired value and short press 1. the
Setting the Flash Trigger Setting the Flash Trigger SHOOT Function Settings C.Fn: Setting Custom Functions Press the
Setting the Flash Trigger Compatible Flash Models Custom Function Function Setting Signs Settings and Description Compatible Flash Models SHOOT One-shoot Only send triggering signals in the M & Multi mode when Transmitter Receiver Flash camera is shooting XProF Full-shoot -- Send parameters and triggering signal when camera is AD400Pro/V860II series/V850II shooting(suitable for multi person photography) TT685 series/TT600/TT350C Only send triggering signal when camera is shooting QuickerII
Compatible Camera Models Technical Data FUJIFILM cameras are divided into three kinds according to their controlling ways to camera flash: A B C GFX50S, X-Pro2, X-T20 , X-T2 , X-T1 X-Pro1 , X-T10 , X-E1 , X-A3 X100F, X100T Camera XProF Compatible cameras FUJIFILM cameras (autoflash) Power supply 2*AA batteries Support for the cameras that have PC sync socket.
Attentions Technical Data Model XProF 1. Wireless Flash Transmission range (approx.) 0-100m Built-in wireless 2.4G Modulation mode MSK Channel 32 Wireless ID 01-99 Group 16 2. 3. Unable to trigger flash or camera shutter. Make sure batteries are installed correctly and Power Switch is turned on. Check if the transmitter and the receiver are set to the same channel, if the hotshoe mount or connection cable is well connected, or if the flash triggers are set to the correct mode.
4. Whether the flash trigger and the receiver end equipment are in the low battery states or not → Please replace the battery(the flash trigger is recommended to use 1.5V disposable alkaline battery). Caring for Flash Trigger Avoid sudden drops. The device may fail to work after strong shocks, impacts, or excess stress. Keep dry. The product isn’t water-proof. Malfunction, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity. Avoid sudden temperature changes.