深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层 1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com http://www.godox.
Foreword Warning Before using this product Always keep this product dry. Do not use in rain or in damp conditions. Please read this user manual carefully in order to ensure your safety and the proper operation of this product. Keep Do not disassemble. Should repairs become necessary, this product must be sent to an authorized for future reference. maintenance center. Keep out of reach of children. Thank you for purchasing a GODOX product.
Contents 23 Foreword 24 Warning 27 Name of Parts Body Flash Head AV Panel Included Accessories Separately Sold Accessories Attaching Bare bulb flash head 31 Battery 32 Power Management 32 Modeling Lamp 32 Wireless Flash Mode 33 Flash Mode— TTL Autoflash TTL Mode FEC (Flash Exposure Compensation) High-Speed Sync 34 Flash Mode—M: Manual Flash 36 Flash Mode—Multi/Stroboscopic Flash 37 Wireless Flash Shooting: Ratio (2.4G) Transmission 39 C.
Name of Parts Name of Parts Body: Flash Head: Light Sensor Speedlite flash head: Flash Head Mounting Socket Power Switch Heat Dissipation Hole 1/4" Mounting Hole Head Mounting Socket Modeling Lamp (LED) Head Release Button Wireless Control Port 3.
Name of Parts Name of Parts (4) Radio Transmission Shooting AV Panel (1) AV Panel Channel Wireless Channel Radio transmission wireless shooting Multi Color Temperature Mode TTL M Mode : HHS c Group C.Fn t0.1 t0 1 Mask MK 12 sec min Hz Group Battery Level T0.1 Flash exposure compensation amount sec min Flash frequency S1 Flash high temperature Modeling lamp(LED) Time Standby ● S1/S2 C.Fn-F2 S1/S2 Beeper ● The display will only show the settings currently applied.
Power Management Name of Parts ON/OFF Power Switch controls the on/off of the flash unit, turn off the power pack if the flash unit will not be used for an extended period. The product design of power supply with automatic hibernation feature, When unattended operation for a long time (approx. 30/60/90 minutes ), the flash will automatically standby. Attaching Bare bulb flash head C.Fn Disabling Auto Power standby function is recommended when the flash is used off camera. (C.Fn-F3, Page 39) 1.
Flash Mode — TTL Autoflash ● With high-speed sync, the faster the shutter speed, the shorter the effective flash range. ● Multi flash mode cannot be set in high-speed sync mode. ● Over-temperature protection may be activated after 20 consecutive high-speed sync flashes. This flash has three flash modes: TTL, Manual (M), and Multi (Stroboscopic). In TTL mode, the camera and the flash will work together to calculate the correct exposure for the subject and the background.
Flash Mode — Multi: Stroboscopic Flash Optic S1 Secondary Unit Setting In M manual flash mode, press the
Wireless Flash Shooting 4. Wireless ID Settings AD200Pro adopts Godox 2.4G wireless X system, which has good compatibility with other products of our company. As a slave unit, AD200Pro is automatically compatible with Canon/ Nikon/ Sony TTL system according to the master unit. Nikon cameras (use X1T-N), Canon cameras (use X1T-C) and Sony cameras (use X1T-S) can use one or more AD200Pro-TTL flashes simultaneously. Positioning and Operation Range (Example of wireless flash shooting) 1.
C.Fn: Setting Custom Functions Other Applications The following table lists the available and unavailable custom functions of this flash.
Number of flashes that will activate over-temperature protection in high-speed sync triggering mode: Power Output Technical Data Times Speedlite flash head Bare bulb flash head Model AD200Pro 1/1 20 50 Wireless Slave Unit Mode Radio transmission mode (compatible with Nikon & Canon & Sony& Fujifilm & Olympus 1/2(+0.3,+0.7); 30 60 & Panasonic & Pentax ) Flash Mode Wireless off M/Multi Slave unit of radio transmission TTL/ M/Multi 1/4(+0.3,+0.7); 50 75 1/8(+0.3,+0.
Firmware Upgrade ● USB connection line is not included in this product. The USB port is a Type-C USB socket.Type-C USB connection line is applicable. ● As the firmware upgrade needs the support of Godox G3 software, please download and install the "Godox G3 firmware upgrade software" before upgrading. Then, choose the related firmware file. ● As the product needs to do firmware upgrade, please refer to instruction manual of the newest electric version as final.