迅丽TTL机顶闪光灯 Thinklite TTL Camera Flash For Sony INSTRUCTION MANUAL 说 明 手 册 神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 中英文双语 / Chinese English Bilingual 地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong Town, Baoan District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 在使用本产品之前: 请先仔细阅读本手册,以确保您能安全使用。请保存好本手册以备将 邮箱/E-mail: godox@godox.com 来查询参考。 http://www.godox.
前言 安全须知 在使用本产品之前: 请勿让本产品淋雨或受潮,以免发生火灾或触电。 请先仔细阅读本手册,以确保您能安全使用。请保存好本手册以 备将来查询参考。 感谢您购买神牛产品。 本产品内部有高压元件,切勿自行拆解或维修。如果接触产品内 部的高压电路,可能会发生触电。需要修理时,请送往指定地点 进行专业维修。 该型号机顶闪光灯适用于SONY系列相机,兼容TTL 自动闪光。 在使用过程中,如果本产品由于跌落、受到挤压或遭受强烈冲击 使用TTL闪光灯,您将获得更简单的拍摄体验,在光线变化复杂的情 而造成外壳破裂的,请勿继续使用,以免因接触到内部电子元件 况下,可以自动获得准确的闪光曝光,拍摄轻松自如。产品特点突出 而受到电击伤害。 表现在以下几方面: ● GN36 (m ISO 100, @105mm) ● 兼容索尼相机TTL 支持TTL自动闪光,可作为无线多灯闪光系统的主控或从属单 元,拍摄更简单快捷。 ● 高清液晶屏 显示直观,操作更加简易 ● 内置2.
目录 01 前言 02 安全须知 05 部件名称 机身 控制面板 液晶显示屏 标配物品 可选购附件 07 装卸闪光灯 07 电源管理 08 闪光模式:TTL自动闪光模式 闪光曝光补偿 高速同步 第二帘快门同步 Electronic Camera Flash 09 闪光模式:M手动闪光 10 闪光模式:Multi频闪闪光 11 无线闪光拍摄:无线电(2.4G)传输 无线设置 设置主控闪光灯的闪光模式 设置通讯频道 TTL:全自动无线闪光拍摄 M:⼿动无线闪光拍摄 Multi:手动无线闪光拍摄 16 其他应用 自动辅助对焦灯 反射闪光 迅丽TTL机顶闪光灯 创建眼神光 ZOOM:设置闪光覆盖范围并使用广角散光板 Thinklite TTL Camera Flash 电池电量低警示 19 C.
● 液晶显示屏 部件名称 (1) TTL自动闪光 01 Zoom : 变焦显示(第18页) 02 TTL : TTL自动闪光 焦距(闪光覆盖/第18页) 03 09 04 05 : 高速同步 06 闪光曝光补偿量 (第09页) (2)M手动闪光 M : 手动闪光 07 10 手动闪光输出 08 ● 机身 (3)Multi频闪闪光 Multi : 多重(频闪)闪光 01. 眼神光板 06. 热靴 02. 内置广角散光板 07. 液晶显示屏 03. 闪光灯头 08. 固定旋钮 04. 光控传感器 09. 电池仓 05. 辅助对焦灯 10. USB端口 闪光次数 闪光频率 13 12 11 MODE ZOOM SYNC 14 19 18 15 20 SLAVE 17 16 SET (4)无线电传输拍摄 ● 主控单元 闪光模式 21 闪光组 ● 控制面板 11. 闪光模式选择按钮 12. ZOOM选择按钮 13. 高速同步按钮 (复用按钮,长按2秒) 18.
● 标配物品 C.Fn 离机使用时,建议通过自定义功能使“自动关闭电源”无效。 (C.
高速同步 S1光控单元设置 使用高速同步(HSS闪光),您可以在所有的快门速度下同步使用闪光 灯。高速同步模式下,使用光圈优先对人像进行填充闪光时特别方 便。按按钮可开启高速同步闪光,此时高速符号< >显 示,然后调节SONY相机快门可实现高速同步闪光。 在M手动闪光模式下,按可以使用S1功能,闪光灯可作为 副灯使用,创造多种照明效果,适用于手动闪光环境。它会与主闪光 灯的第一次闪光同步触发闪光,效果与使用无线引闪器一致。 S2光控单元设置 ● 使用高速同步,快门速度越高,有效的闪光范围就越小。 ● 在高速同步模式下,无法设置频闪闪光。 ● 连续高速同步闪光15次后,闪光灯热保护功能可能会被激活。 ● 尽量不使用高速同步闪光,因为高速同步闪光会缩短闪光管寿命。 在M手动闪光模式下,按可以使用S2功能,闪光灯可作为 副灯使用,适用于TTL闪光环境。具有防预闪功能,使用带一次预闪 功能的相机能用光控实现同步拍摄。它会与主闪光灯的第二次闪光同 步触发闪光,即2次光控引闪。 第二帘快门同步 ● 只有在M模式下才支持S1/S2光控引闪模式。 使用慢速快门,您可以在
闪光次数/闪光频率=快门速度 例如,如果闪光次数是10,闪光频率是5Hz,快门速度则至少为2秒。 为防止闪光灯头过热并损坏,请勿执行连续10次以上的频闪闪光连 拍。闪光10次后,请让闪光灯至少冷却15分钟。如果您试图执行 连续10次以上的频闪闪光连拍,为防止闪光灯头过热,闪光可能自 动停止。如果发生了这种情况,请让闪光灯至少冷却15分钟。 ● 即使有多个从属单元,主控单元也可通过无线控制控制所有 的闪光灯。 ● 本说明手册中,“主控单元”指安装在相机上的闪光灯, “从属单元”指通过无线控制的闪光灯。 1、无线设置 ● 反光很强的被摄体在暗背景前使用频闪闪光更加有效。 您可以在普通闪光和无线闪光之间切换。对于普通闪光,请务必将无 线设置设为“关”。 ● 推荐使用三脚架和遥控开关。 ● 频闪闪光时也可以使用“buLb”。 主控单元设置 ● 如果闪光次数显示为--,则闪光灯会连续闪光,直到快门或电池 耗尽。如下表所示,闪光次数将受到限制。 ZOOM SYNC 1 SLAVE 最大频闪闪光次数 闪 Hz 光输出 1 2 3 4 5 6-7 8-9 10 20-50 SET 60-
3、设置通讯频道 如果在拍摄现场不止一个无线闪光系统,您可以通过更改通讯频道来 防止信号干扰。保证主控单元和从属单元设置为相同的频道编号即 可。 ZOOM SYNC 1 SLAVE SET 5、M:手动无线闪光拍摄 使用手动闪光的无线(多重闪光)拍摄,可以为每个从属单元(闪光 组)设定不同的闪光输出进行拍摄。在主控单元上设定所有参数。 长按按钮2秒直至 频道值闪烁,旋转调节旋钮 从1至16中选择频道。 MODE ZOOM SYNC SLAVE 1 选择M模式。 SET ZOOM SYNC 2 SLAVE SET 将闪光模式设为。 ● 按下按钮, 按下设置按钮确定。 MODE ZOOM SYNC SLAVE SET 4、TTL: 全自动无线闪光拍摄 2 设置闪光输出 ● 旋转调节旋钮为闪光组设 定闪光输出。 3 拍摄照片 ● 各组以设定的闪光光比闪光。 使用一个从属单元闪光 1 设置主控单元 ●将安装在相机上的T350S设 为主控单元。 (第12页) ●M/A/B/C都可独立设置为 TTL。 2 设置从
使具有无线电传输无线拍摄功能的闪光灯(主控/从属),可按照与普通 TTL自动闪光拍摄同样的方法,轻松利用高级无线多重闪光照明进行拍 摄。 ● 用三个从属组进行自动闪光拍摄。 基本相对位置和操作范围如图所示,只要将主控单元设定为就 可以进行无线自动闪光拍摄。 C 定位和操作范围(无线闪光拍摄的示例) ● 使用一个从属单元进行自动闪光拍摄 A (主控) B (从属) 传输距离约30米 ● 使用附带的微型支架定位从属单元。 ● 开始拍摄前请进行测试闪光和试拍。 ● 受从属单元的位置、周围环境、天气状况等影响,传输距离可能 更短。 无线多重闪光拍摄 可以将从属单元分割为两个或三个组同时进行TTL自动闪光拍摄。此 外,可以为各闪光组(最多3个组)设定并用不同的闪光模式拍摄。 其他应用 自动辅助对焦灯 在低亮度或低对比度的拍摄情况下,闪光灯内置的自动对焦辅助灯将 开启,使自动对焦更容易。当对焦困难时,红色辅助对焦灯亮起;当 对焦准确,辅助对焦灯自动熄灭。 如想关闭自动辅助对焦功能,在C.
反射闪光 ZOOM:设置闪光覆盖范围并使用广角散光板 通过将闪光灯头指向墙壁或天花板,闪光在照亮被摄体前被墙面反射。 这可以减轻被摄物体背后的阴影,获得更自然的摄影效果。称之为反射 闪光。 该闪光灯有两种变焦方式:自动变焦和手动变焦。可以设置闪光覆盖范 围以匹配24-105毫米的镜头焦距。自动变焦时,焦距会随相机变焦镜 头的改变而变化,以提供最佳闪光效果。同样,使用内置的广角散光 板,闪光覆盖范围可以扩展为14毫米广角镜头。 旋转闪光灯头来设置反射方向。 -7-90 手动变焦时,按下 ZOOM SYNC SLAVE 设置按钮。 270 SET ● 转动调节旋钮更改闪光覆盖范围。 ● 在显示< AU>状态下,将自动设置 闪光覆盖范围。 ● 如果手动设置闪光覆盖范围,确保其覆盖镜头焦距,这样照片就不 会出现阴影边缘。 ● 低电量警示时,ZOOM值将无法调整,自动固定在24mm。 使用广角散光板 拉出广角散光板并将其置于闪光灯 头上。闪光覆盖范围将扩展至14毫 米。 ● 如果墙壁或天花板太远,反射闪光可能太弱并导致曝光不足。 ● 墙壁或天花板应该是平坦的、白色的以利于高效的反
高速同步模式下,激活热保护功能的连续闪光次数: C.Fn:设置自定义功能 请对照以下图表本机应用栏,使用自定义功能来完成设置。 自定义 功能 设置符号 设置和说明 功能符号 ST 自动休眠(standby) AF 自动对焦辅助光闪光 BL 背光控制 功率 次数 1/1 15 1/2(+0.3,+0.7); 20 1/4(+0.3,+0.7) 30 ON 启动 1/8(+0.3,+0.7); OF 关闭 1/16(+0.3,+0.7) ON 启动 OF 关闭 10秒 10秒后自动熄灭 OF 一直熄灭 ON 一直点亮 40 2. 其他保护 ● 为了保证设备安全的工作,系统时刻进行预防保护,以下提示符号 供您参考: LCD显示 警示内容 E1 闪光灯回电系统出现问题,无法回电引闪,请重新开机,如无法 解决请维修 3. 按< SET >设置按钮,自定义功能编号闪烁。 E3 闪光灯管两端电压过高,请维修 4. 旋转调节旋钮设置想要的编号,按按钮确定。 E9 固件升级有误,请进行正确固件升级 1.
规格参数 型号 故障排除指南 TT350S 如果遇到问题,请参阅此故障排除指南。 · 类型 兼容相机 SONY索尼 (参考兼容相机列表) 闪光指数 36(m ISO 100) (1/1档位;105mm焦距) 闪光覆盖范围 闪光灯不充电。 ● 电池安装方向错误。 →以正确的方向安装电池。 ● 闪光灯的内置电池耗尽。 24 – 105毫米 →如果闪光灯LCD屏幕上< >显示并闪烁,表明需要更换电池。 •自动变焦(自动设置适合镜头焦距和图像尺寸的闪 光覆盖范围) •手动变焦 •闪光灯头旋转/倾斜,水平0~270°, 垂直-7°~90°(反射闪光) 闪光持续时间(t0.
兼容相机列表 本机可兼容以下SONY相机型号: α7RII α7R α58 α99 ILCE6000L α77 II RX10 注: 1. 此表格仅列举目前已测试的相机型号,未涵盖所有SONY相机。 其他相机型号,用户可自行测试。 2.
Foreword For Your Safety Thank you for purchasing this product. Always keep this product dry. Do not use in rain or in damp conditions. This TT350S camera flash applies to SONY series cameras and is This product contains high-voltage electronic parts. Touching the high-voltage circuit inside it may result in electric shock. Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. compatible with TTL autoflash.
Contents 25 Foreword 26 For Your Safety 29 Name of Parts Body Control Panel LCD Panel What's in the Box of TT350S? Separately Sold Accessories 31 Attaching to a Camera 32 Power Management 32 Flash Mode: TTL Autoflash FEC (Flash Exposure Compensation) High-Speed Sync Second-Curtain Sync 34 Flash Mode – M: Manual Flash 35 Flash Mode – Multi: Stroboscopic Flash 36 Wireless Flash Shooting: Radio (2.
● LCD Panel Name of Parts (1) TTL Autoflash Zoom : zoom display (Page 42) Focus length (Page 42) TTL : TTL autoflash 01 02 03 09 04 05 06 : Flash exposure compensation (Page 33) (2)M Manual Flash Flash exposure compensation amount M : Manual flash 07 10 Manual flash output (3)Multi Flash 08 ● Body Multi : Stroboscopic flash 01. Catchlight Panel 06. Hotshoe 02. Built-in Wide Panel 07. LCD Panel 03. Flash Head 08. Lock Ring 04. Optic Control Sensor 09. Battery Compartment 05.
● What’s 1. Flash unit in the Box of TT350S? 2. Mini stand 3. Protection case 4. Diffuser Power Management 5. Instruction manual ● Separately Sold Accessories The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: X1T-S wireless flash trigger, Mini softbox, White & Silver reflector, Honeycomb, Color gels, Snoot, etc. Use Power Switch to power the flash unit on (Long press the button for one second) or off.
FEC: Flash Exposure Compensation With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops. It is useful in situations where minor adjusting of the TTL system is needed based on the environment. Setting FEC: MODE ZOOM SYNC 1 SLAVE SET Press the SET Button and the flash exposure compensation amount will be highlighted on the LCD panel. M: Manual Flash The flash output is adjustable from 1/1 full power to 1/128th power in 1/3rd stop increments.
Multi: Stroboscopic Flash With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture a multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the flash output. MODE ZOOM MODE SYNC ZOOM SET SLAVE SYNC SLAVE SET 1 2 3 MODE ZOOM SYNC SLAVE SET MODE ZOOM SYNC SLAVE Press button so that is displayed.
Slave Unit Setting ZOOM SYNC 1 SLAVE SET Long Press the button for 2 seconds so that < > is blinking. Turn the Select Dial until the < > is displayed on the LCD panel, which means the slave unit. 2 Slave Unit Setting ● Set the TT350S that to be controlled as the wireless slave unit. (Page 37) ● The slave unit can be set as A/B/C. 3 Check the communication channel ● If the master unit and slave unit(s) are set to a different channel, set them to the same channel.
5. M: Wireless Flash Shooting with Manual Flash Slave/Master Unit's Positioning and Operation Range This describes wireless (multiple shooting) using manual flash. You can shoot with a different flash output setting for each slave unit (firing group). Set all parameters on the master unit. ● Autoflash Shooting with One Slave Unit MODE ZOOM SYNC SLAVE 1 Setting the flash mode to ● Press the Button to set the flash to M mode.
Other Applications ● If Auto Focus Assist Beam In poorly-lit or low-contrast shooting environments, the built-in auto focus assist beam will automatically light on to make it easier for autofocus. The beam will light up only when autofocus is difficult and get out as soon as the autofocus becomes correct. If you want to turn off the auto focus assist beam, set the “AF” to “OFF” on the C.Fn settings. the wall or ceiling is too far away, the bounced flash might be too weak and result in underexposure.
Using the Wide Panel Pull out the wide panel and place it over the flash head as shown. The flash coverage will then be extended to 14 mm. ● The catchlight panel will come out at the same time. Push the catchlight panel back in. ● When pull out the wide panel, the ZOOM will constantly be 14mm. The button will not work. Low Battery Warning If the battery power is low, < > will appear and blink on the LCD panel. Please replace the battery immediately.
Firmware Upgrade • Auto Focus Assist Beam Effective range (approx.) Center: 0.6~4m This flash supports firmware upgrade through the USB port. Update information will be released on our official website. USB connection line is not included in this product. The USB port is a standard Micro USB socket. Common USB connection line is applicable. Periphery: 0.6~2.5m • Power Supply AA batteries Recycle time Ni-MH batteries (recommended) or 2*LR6 alkaline batteries Approx. 0.1-2.
Troubleshooting If there is a problem, refer to this Troubleshooting Guide. Compatible Camera Models This flash unit can be used on the following Sony camera models: α7RII The Camera Flash cannot be charged. ● The battery is installed in the wrong direction. →Install the battery in the correct direction. ● The camera flash’s internal battery is exhausted. →If < > appears and blinks on the LCD panel, replace the battery immediately.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a re sidential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.