Installation Guide

Home Security Suite Quick Programming Guide
TM
PREMIUM
Door / Window Sensor
1. Identify Parts
2. Insert Battery
3. Add Product Via App
a. Select “ADD PRODUCT”.
b. Select Sensors.
c. Select Door / Window.
d. Follow the App
instructions.
e. When prompted, press
the Program Switch
with a small tool.
4. Install Device (refer to full instructions)
Motion Sensor
1. Identify Parts
2. Insert Battery
3. Add Product Via App
a. Select “ADD PRODUCT”.
b. Select Sensors.
c. Select Motion Sensor.
d. Follow the App
instructions.
e. When prompted, press
the Program Switch
with a paper clip.
4. Install Device (refer to full instructions)
Siren / Strobe
1. Identify Parts
2. Insert Batteries
3. Add Product Via App
a. Select “ADD PRODUCT”.
b. Select Alarms.
c. Select Siren / Strobe.
d. Follow the App
instructions.
e. When prompted, press
the Program Switch
with a small tool.
4. Install Device (refer to full instructions)
BRACKET
MAGNET
DOOR /
WINDOW
SENSOR
LED STATUS
INDICATOR
CASE
SCREW
PRESS ON TAB
TO OPEN CASE
SENSOR
LENS
LED STATUS
INDICATOR
PROGRAM SWITCH
ACCESS HOLE
FRONT
VIEW
REAR
VIEW
LED STATUS
INDICATOR
SIREN
SOUNDER
STROBE
LIGHTS
FRONT
VIEW
REAR
VIEW
REMOVABLE
MOUNTING
PLATE
MOUNTING PLATE
LOCKING TAB
BATTERY
HOLDER
PROGRAM
SWITCH
INSERT BATTERY
INTO HOLDER
OBSERVE
BATTERY
POLARITY !!!
INSERT BATTERY
INTO HOLDER
OBSERVE
BATTERY
POLARITY !!!
OBSERVE
BATTERY
POLARITY !!!
INSERT
4 TYPE "AA"
ALKALINE
BATTERIES IN
IN HOLDER
INSERT HOLDER
INTO SIREN CASE
MOUNT
SENSOR
ON WINDOW
OR DOOR
FRAME
MAGNET
ON WINDOW
OR DOOR
DON'T POINT AT HEAT SOURCES (HEATERS, ETC.)
WINDOWS, OTHER MOTION DETECTORS OR
DOOR/WINDOW TRANSMITTERS
BEDROOM
BATH
KITCHEN
FRONT
ROOM
(FOR INDOOR
USE ONLY)
MOUNT
DETECTOR
SO THAT
INTRUDER
WILL CROSS
BEAMS
PIR
MOTION
DETECTOR
MOUNTING
PLATE
LOCKING
TAB
10004885 X4Copyright © 2015 Nortek Security & Control
PROGRAM
SWITCH
PROGRAM
SWITCH
PROGRAM
SWITCH