Operation Manual

Technical specifications:
Multi-socket: 230V, 50Hz,
14 Watt (stand-by < 0.1 Watt)
IP Class: 20 Casing
Dimensions 360 x 230 x 70 mm
Maintenance:
-
Warranty:
Product compliance
This product is CE certified and complies to:
EN 60335-1: 2002 + A1 (2004) +A2 (2006)
+ A11 (2004) + A12 (2006);
IEC 60884-2-4:2007;
IEC 55014-1 / 55014-2;
IEC 60730-2-8;
EN 61770:2009;
NEN 1020:1978+A2:2004
Safety:
Disposal:
Use
1
Installation:
Safety, maintenance and technical specifications:
boiler
Go Green DishWash, for sustainable housekeeping
Manual
The DishWash is supplied with the following parts:
DishWash
pipes
Lid
Multi-socket
Remote control
(3x) clips, plugs and screws
and bottom
Go Green's DishWash offers 1 year
warranty on the parts. Please contact us
via www.go-green.nl if something breaks
or if you have any questions.
Most of Go Green's DishWash's parts
can be recycled. Take Go Green's
DishWash's electrical parts to a collec-
tion point for electrical appliances and
take the copper pipes to a metal waste
disposal unit. The lid and the bottom can
be thrown away.
This manual has been printed
on FSC certified paper.
• Only connect Go Green's DishWash to
a 16A earthed fuse. Do not use an
extension lead.
• Only use Go Green's DishWash in the
way described in this manual.
• Only place Go Green's DishWash
against a wooden or a stone wall (this
wall needs to be able to bear at least 6
kilos).
• Only use Go Green's DishWash in the
house; in rooms which are between 5
and 40 °C, at a maximum of 2000
meters above the Amsterdam Water
Level and in areas which have a
maximum humidity of 85%.
• Do not expose Go Green's DishWash
to splashing water.
Go Green's DishWash does not need to
be maintained. You can clean the lid, the
remote control and the multi-socket
using a cloth.
necessary items
(not provided):
2 Flexible pipes, Kiwa
approved and suitable
for hot water
up to 90° C.
Remove the high efficiency boiler, boiler or
water pump's plug from the socket (or turn
off the district heating)
Turn off the hot and cold water supply (or stop tap
and water meter) by turning the taps to the right.
Turn off the washing
machine's tap and
disconnect the washing
machine's pipe.
Place a bucket under the tap
and allow the pipes to fully
drain.
Unscrew the tap from the pipe
and place it to one side.
Press the button on the Go Green
DishWash's remote control once you
turned on the washing machine.
The DishWash will turn off automati-
cally at the end of a program.
Thank you for purchasing this product. Go Green's DishWash conserves energy when
washing by providing hot water. This means the washing machine does not have to heat
the water electrically which is more efficient and which conserves energy. It also means
your dishwasher will last longer.
Go Green's Wash is compatible with all brands and types of dishwashing machines and
can be connected to solar boilers, water pump boilers, district heating or high performance
combination boilers.All you need is a hot water connection point in your kitchen area.