User guide UK 2 Bedienungsanleitung D xx Guide d’utilisation F xx Manual del usuario ES xx Guia do utilizador P xx Istruzioni d’uso I xx Gebruikershandleiding NL xx Brugsanvisning DK xxx Bruksanvisning S xxx FIN xxx Käyttöohje xxx xxx 1552-099 Rev.A 1 GN6110_contents_EU_21-10-03.
English – GN 6110 user guide 1. Product information This user guide provides you with information on setting up, using and maintaining your GN 6110. Congratulations on purchasing the GN 6110, which consists of a base and headset. The GN 6110 accepts calls from both your desk and mobile phone, letting you answer/make a call from either your desk or mobile phone via your headset.
1.2 GN 6110 – Parts and signatures 2. Assembling your GN 6110 5 13 12 4 14 2 First assemble your GN 6110 to work with your desk telephone, and then set it up to work with your mobile phone. The GN 6110 supports the GN 1000 Remote Handset Lifter for desk telephones as well as newer telephones with built-in electronic hook switches. AUX See Section 4.3 for hook switch set up instructions and use.
Note: For your convenience, you may also feed the telephone cord through the base’s right or left slot, depending if your desk telephone is positioned to the right or left of the base. Clear dial tone adjustment Desk telephones operate on a range of standards. In order for your GN 6110 to work with your desk telephone and to hear a clear, crisp dial tone, you must set the correct dial tone setting. Consult the inside back cover of this user guide for the most common telephone models and settings. 5.
C 2. Put on your headset and press the Multifunction Button on the base. An audible tone will shortly be heard. 3. Lift the telephone’s handset from the cradle and listen for a dial tone in your headset. 4. Using your desk telephone, make a call to someone who will act as your test person. 5. While speaking with your test person, adjust the blue microphone volume adjustment button until he/she hears your voice at an appropriate level. 2.
Making calls: 1. With the boom arm open, press the Multifunction Button on either the headset [C] or the base [B]. An audible tone will be heard and the connection will be established shortly. 2. Lift the telephone’s handset, or press the telephone’s line button if your telephone has one. A dial tone will be heard. 3. Dial the desired number when the dial tone is heard in your headset. Headset C A B handset switching (while on a call). To switch from using the headset to the handset during a call: 1.
3.2 Operation – with mobile telephone If your headset is in its base, press the release headset button to free the headset before using it. Turning headset ON: Open the headset boom arm. The headset indicator will light for 2 seconds, and then continue to flash slowly as long as the headset is on. Turning headset OFF: Close the headset boom arm. The headset indicator will light for 2 seconds, after which it will turn off. Making calls: 1. Open the headset boom arm and place the headset on the ear. 2.
3. You have 30 seconds to accept the transfer to your mobile phone; after accepting continue the call on your mobile phone. 4. To end the call, use the mobile phone’s End Call button/functionality. Press the volume + (up) or volume – (down) button until the desired volume level has been reached. If minimum/maximum volume is reached, an audible tone will be heard in the headset. To switch from using the mobile phone to the headset during a call: 1.
A To connect your GN 1000 to the GN 6110, complete the following: 1. Connect the GN 1000’s connector cord to the yellowmarked hook switch [AUX] socket on the bottom of the base [A]. 2. Consult the GN 1000 user guide to complete the set up. Note: If you cannot locate the GN 1000 product box and/or user guide, consult GN Netcom’s web pages at www.gnnetcom.dk. To change for left ear wearing, use the instructions as follows: 1. Open the headset boom arm. 2. Put the headset’s earhook in its opened position. 3.
2. The hook switch will be activated, and your telephone’s handset will be lifted. 3. Dial the desired number when the dial tone is heard. The headset indicator and the base’s on-line indicator will flash rapidly for the duration of the call. 3. To end the call, hang up the telephone handset. Answering calls: 1. Press the Multifunction Button on either the headset [C] or the base [B], or open the headset boom arm [A] if not already opened.
4.6 Pairing your headset to the desk telephone To use your headset, press the release headset button to free the headset from its base. During initial (and subsequent) charging, you may use your desk telephone’s handset. Battery charge indication The headset indicator will light to indicate charging, and will turn off when fully charged.
Verifying pairing To verify pairing, create an audio link between the headset and base by completing the following: 1. With the boom arm open, press the Multifunction Button on either the headset [C] or the base [B]. C An audible tone will be heard, and A B the headset indicator and online indicator will flash rapidly. 2. To end the audio link, press the Multifunction Button on either the headset or base, or close the headset boom arm. Note: You may verify pairing at any point.
The headset’s visual indicators: Headset mode Power Off Charging in Process Charging Complete Pairing Mode Pairing Successful Audio Link (on a call) Headset ON, but not on a call Opened boom arm (turn ON) Closed boom arm (turn OFF) Test link established Headset indicator OFF (no charger) ON (charger plugged in, or headset placed in base) OFF (charger plugged in, or headset placed in base) ON (no charger) with headset boom arm opened Series of 10 rapid flashes Rapidly flashes Continously flashes (slow rate)
How long do I have to charge the headset before I can use it? It takes 2 hours to fully charge your headset. Although you may already use your headset after 20 minutes of charging, we recommend you allow 2 hours of charging before you use your headset. The battery indicator represents the charge level of your headset. One lit indicator light represents a 25% charge and when all four indicator lights are lit the headset is fully charged.
Only authorised dealers or service centres may open the product. If any parts of your GN 6110 require replacement for any reason, including normal wear and tear or breakage, contact your dealer. USA FCC part15 FCC Notice to Users/Product Statements This device complies with part 15 of the FCC rules.
GN Netcom Inc. 77 Northeastern Blvd. Nashua NH 03062 Canada IC Notice to Users/Product Statements Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
