Jabra JX 10 with Bluetooth Hub English – Français – Español
English Content Headset Setup and Charging Adjusting headset for your comfort Charging your headset Turning your headset on 4 5 5 Bluetooth Hub Setup and Use (for Desk Phone) Connecting Bluetooth Hub with desk phone and power supply Making a test call on your desk phone to adjust settings Making and ending a call via desk phone Answering an incoming call to desk phone 6 7 9 11 Mobile Phone Setup and Use Pairing headset to mobile phone Making and ending a call from mobile phone Using Voice Dial Answerin
English In the box AA BB 8 6 2 5 10 1 7 15 14 3 4 11 12 13 EE 16 C C A. Jabra JX 10 headset 1. 2. 3. 4. 5. 6. 7. 8. DD 9 Light indicator (LED) Volume controls Charging socket Answer/End button (also On/Off) Pairing button Microphone Speaker Earhook FF 17 18 B. Jabra Bluetooth Hub 9. Dial Tone Finder 10. Light indicator (LED) 11. Pairing button 12. Microphone volume control 13. AUX socket 14. Handset socket 15. Desk phone socket 16. Reset button 17.
English Headset Setup and Charging Adjusting headset for your comfort 1 Headset is preset for use on right ear. Switch if necessary. 2 Bend to fit. 3 Adjust speaker volume (how others sound to you) on headset.
English Charging your headset 4 Charge via desk stand or Charge directly (handy for travel). Important: Make sure your headset is inactive while charging. 5 Red = charging. Green = fully charged (approximately 2 hrs.). Turning your headset on 6 Press headset Answer/End button for 1 sec. Blue flash.
English Bluetooth Hub Setup and Use (for Desk Phone) Connecting Bluetooth Hub with desk phone and power supply If your desk phone has a headset port, see instructions in inset. For desk phones without headset port: if your desk phone has an electronic hookswitch lifter, or you are using a GN 1000 (remote handset lifter), please refer to the User Manual on the supplied CD-ROM for instructions. 1 2 Disconnect handset from desk phone. Connect handset to Bluetooth Hub.
English Making a test call on your desk phone to adjust settings If your desk phone has an electronic hookswitch lifter, or you are using a GN 1000 (remote handset lifter), please refer to the User Manual on the supplied CD-ROM for instructions. 1 Place headset on ear. For desk phones with headset port 2 2 Press the appropriate desk phone button to establish a clear dial tone. Lift desk phone handset. 3 4 Tap headset Answer/End button. Listen for dial tone in headset.
English 5 If necessary, find a clear dial tone via settings A-G on Bluetooth Hub Dial Tone Finder is preset to setting A (most commonly used). 6 7 Dial a friend to test settings. Adjust microphone volume (how your voice sounds to others) via Bluetooth Hub. For desk phones with headset port 8 To end call, replace desk phone handset AND tap headset Answer/End button. 8 8 Press the appropriate button on desk phone AND tap headset Answer/End button.
English Making and ending a call via desk phone If your desk phone has an electronic hookswitch lifter, or you are using a GN 1000 (remote handset lifter), please refer to the User Manual on the CD-ROM for instructions. 1 2 Place headset on ear. Tap headset Answer/End button. For desk phones with headset port 3 3 Press the appropriate desk phone button to establish a clear dial tone. Lift desk phone handset. 4 Dial number. 4 Dial number.
English 5 Begin talking. 6 To end call, replace desk phone handset AND tap headset Answer/End button. For desk phones with headset port 6 For desk phones with headset port, press the appropriate button on desk phone AND tap headset Answer/End button.
English Answering an incoming call to desk phone If your desk phone has an electronic hookswitch lifter, or you are using a GN 1000 (remote handset lifter), please refer to the User Manual on the CD-ROM for instructions. 1 2 Place headset on ear. Tap headset Answer/End button. For desk phones with headset port 3 Lift desk phone handset. 3 Press the appropriate desk phone button to establish a clear dial tone. 4 Begin talking.
English Mobile Phone Setup and Use Pairing headset to mobile phone (establishes Bluetooth connection) 1 See your mobile phone User Guide for Bluetooth pairing instructions. 2 Press headset pairing button for 1 sec. Blue light indicates open for pairing (5 minutes).
English Mobile Phone Use Making and ending a call from mobile phone 1 Place headset on ear. Dial number on mobile phone and tap Talk/Yes or similar. 2 Begin talking. To end call, press End/No or similar on mobile phone OR tap headset Answer/End button.
English Using Voice Dial (if your mobile phone supports this feature) 1 2 Press headset Answer/End button for 1 sec. Hear voice dial signal. (Mobile phone dependent) 3 Give voice dial command. Answering an incoming call to mobile phone 1 2 Tap headset Answer/End button. Begin talking.
English Quick Reference Operating the Answer/End button How to… Headset Answer/End button action Turn power on Press for 1 sec Turn power off Press and hold for 5 sec Make call via desk phone Tap Make call via mobile phone Voice Dial (if mobile phone has feature) Press for 1 sec Redial last outgoing number (from mobile phone) Double tap Answer all calls Tap End all calls Tap Reject a call (to your mobile phone) Press for 1 sec Put a call on hold Press for 1 sec Switch between two active
English Quick Reference What the lights mean Red Blue Green Headset Red Blue Green Bluetooth Hub Green steady Charge complete Green steady Bluetooth Hub on Blue slow flash Headset on Blue steady Pairing in progress Blue fast flash Call in progress Blue flash 10 times Pairing successful Blue steady Headset in pairing mode Red flash Red flash Low battery Bluetooth Hub needs to be reset Red steady Charge in progress Red steady Reset in progress Your Jabra JX 10 with Bluetooth Hub