USER GUIDE 1
Welcome Statement: Congratulations on your purchase of a ReSound Unite Remote Control. This device complies with Part 15 of the FCC Rules. ReSound Unite Remote Control will allow you to operate your ReSound hearing instruments. It is both an elegant and userfriendly remote control as well as status reader which gives you access to other wireless functions on your hearing instruments. The ReSound Unite Remote Control can be used to tune both of your hearing instruments simultaneously.
t 3FPSJFOU PS SFMPDBUF UIF SFDFJWJOH BOUFOOB t *ODSFBTF UIF TFQBSBUJPO CFUXFFO UIF FRVJQNFOU BOE SFDFJWFS t $POOFDU UIF FRVJQNFOU JOUP BO PVUMFU PO B DJSDVJU EJGGFSFOU from the receiver is connected. t $POTVMU UIF EFBMFS PS BO FYQFSJFODFE SBEJP 57 UFDIOJDJBO GPS help. Changes or modifications can void the user’s authority NOTE: Allthe tests have been performed at a FCC listed lab to operate equipment.
Contents Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Adjust volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Return to Home settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Pairing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Operating range . . . . . . . . . . . . . . .
Description 1 2 3 4 5 6 7 8 9 10 11 Display Key Lock ReSound Unite TV button Home button Increase volume Decrease volume Activate left hearing instrument only Activate right hearing instrument only Program change Pairing button AAAA battery 10 1 5 9 4 2 7 8 3 11 6 8 9
Getting Started Adjust volume Changing program The “P” button (9 on page 7) is used to change the programs that your hearing care professional has programmed into your hearing instruments. The name of the program displayed can be configured by your hearing care professional. Each time you press the “P” button the program advances one step, returning back to program 1 at the end of each cycle (e.g. 1, 2, 3, 1).
Adjust volume on the right hearing aid only To adjust volume on the right side only, first press the “>” key on the keypad (8 on page 7). Doing so will make the right side “active” and the left side “inactive”. This will be indicated by a right arrowhead (>) in the display with the left arrowhead turned off. Now press “+” or “-“ to adjust volume on the right side only.
Key lock Low battery indicator A two-position key lock switch, located on the right side of the remote control, serves to prevent accidental activation. This feature is handy when the device is kept in a pants’ pocket or purse. When in the locked position all keys/buttons are non-functional. When switched to the non-locked position normal functionality is restored.
Operating range Screen display The Remote control operating range is approximately 100 cm (40”). In the event that you cannot read out the status on the remote control, hold the remote control in front of your chest, as it is shown in the picture. To conserve battery life, the remote control has a Standby feature that automatically turns off the display after 20 seconds of nonuse.
Pairing Note! The following information is intended primarily for your hearing care professional, who in most cases will complete the tasks that are necessary before the ReSound Unite Remote Control can be used with your hearing instruments. However, the process is designed to be simple and should be easily accomplished by almost anyone. Pairing is the process of setting up an exclusive communication between your hearing instruments and your ReSound Unite Remote Control.
ReSound Unite TV (optional) The ReSound Unite TV is an optional accessory available for your hearing instruments. With this accessory you can listen to your TV, Stereo, Computer, etc. directly in your hearing instruments. The Unite TV has a range of 7m / 20 feet, thus you can move around freely when listening to your favourite TV show, music, etc.
To stop streaming and return to the previous program, press the “P” button (9 on page 7). Alternatively, press the Home button (4 on page 6), which will also reset the remote control to simultaneous adjustment mode. Note, however, that the Home button also changes other settings, as described above. Phone (optional) ReSound Unite Phone Clip or the PhoneNow™ also work with the Remote Control.
Situation #4: Both aids are set to P1 but you are using the PhoneNow™ feature on the left side. If during the call you press the P button, the right side will advance to P2 but this will not disrupt the call. After the call the left side will remain in P1. If during the call you press the Streaming button instead, streaming will start on the right side only, also allowing the call to continue on the left side.
General precautions Technical specifications t :PVS IFBSJOH JOTUSVNFOU BOE UIF SFNPUF DPOUSPM XFSF HJWFO B unique communication network code during the fitting. This ensures that the remote control will not affect hearing instruments worn by others. Operating range: Batteries: Wireless: Operating temperature: Storage temperature: t )JHI QPXFSFE FMFDUSPOJD FRVJQNFOU MBSHFS FMFDUSPOJD JOTUBMlations and metallic structures may significantly reduce the operating range.
Warranty What is not covered by this warranty? The Remote Control is covered by a limited warranty issued by the manufacturer for a period of 12 months from the day of the original purchase. Please notice that extended warranties may apply in your country. Please contact your local Hearing Care Professional for more information.
TROUBLESHOOTING GUIDE SYMPTOM CAUSE POSSIBLE REMEDY The display remains turned off when pressing a key on the Remote Control The batteries in the Remote Control are depleted Replace the AAAA batteries with new ones No information is shown on the display after it has been activated by a press of any Remote Control key The Remote Control and hearing aids have not been paired Carry out the pairing process The pairing button on the Remote Control is pressed but the ’searching’ icon on the display does
SYMPTOM CAUSE POSSIBLE REMEDY Two different program numbers or icons are shown on the display The two hearing aids are not in the same program. This can be for several reasons, e.g. that one of the hearing aids was not within wireless range when a command was given from the Remote Control, or because you have changed program on one of the hearing aids by pressing its pushbutton. Press the Program change, TV or Home button as appropriate.
Notes: 34 Notes: 35
Notes: 36 Notes: 37
Be aware of information marked with the warning symbol WARNING points out a situation that could lead to serious injuries, CAUTION indicates a situation that could lead to minor and moderate injuries Advice and tips on how to handle your ReSound Unite accessory better.
Worldwide Headquarters ReSound A/S Lautrupbjerg 7 DK-2750 Ballerup, Denmark Tel.: +45 45 75 11 11 Fax: +45 45 75 11 19 www.gnresound-group.com United Kingdom GN ReSound Ltd. 1 Landscape Close Weston Business Park Weston-on-the-Green Oxon OX25 3SX Tel.: +44 1869 352 800 Fax: +44 1869 343 466 www.gnresound.co.uk 17359000-GB-10.01 Rev.A 40 Australia GN ReSound Pty. Ltd. Unit R1 Regents Park Estate 391 Park Road Regents Park NSW 2143 Tel.: (free) 1800 658 955 Fax: +61 2 9743 7472 www.gnresound.com.
