User's Manual

IMEI:123456789012345
SSID: admin
PWD: admin
1. Signal Indicator 2. Wi-Fi Indicator
3. Battery Indicator 4. Type-C(Input)
5. Power button
Local SIM
1. Power on: Press power button for 3 seconds.
2. Power off : Pre
ss power button for 5 seconds.
3. Reset: Press power button for 14 seconds.
4. Restore Factory Settings：Press reset button for 5 seconds.
5. Battery Capacity and Signal Strength: Press the power
button, the battery capacity will be shown in the first 3
seconds, then the signal strength will be shown afterwards.
1. Register an Account：Scan the QR
code below to download the
GlocalMe App. You can register for an
account after installation.
2. Activate Device: Use the GlocalMe
app to scan the QR code on the back
panel of the device.
3. Purchase Package: Purchase
package or top up through the
GlocalMe app.
4. Power On: Press power button
for 3 seconds.
1.
P
lease tur
n o your device
when inserting/removing SIM
card
2.
Open the shell c
o
ver As
shown on the right, insert SIM
card according to marked
direction.
※UPP device does not
support SIM cards with PIN
code, if you want to use this
type of SIM cards, please
unlock the PIN code first.
Quick Start Guide
5. Connect to GlocalMe: When the When the Wi-Fi LED
indicator “ ” is staying on, turn on Wi-Fi on your cell
phone, select GlocalMe Wi-Fi, enter the password to
connect to the internet. (Wi-Fi name and password
can be seen on the back panel. as shown below)
6. Device Management: Enter “192.168.43.1” in the
address bar of web browser, and enter the username
and password to login. (The initial username and
password are
admin/admin
).
Copyright © 2022 uCloudlink All Rights Reserved
User Manual
Product Overview
Function Introduction
Brand: GlocalMe Model No.:GLMU21A03
Box content: Device, Quick start,, Type-C cable
Technical Specification:
Function Introduction
• Size:
• LTE FDD:
• LTE TDD:
• WCDMA:
• GSM:
• Max Upload Speed:
126*66*10mm
B2/4/5/7/12/13/17/25/26/66
B41
B2/4/5
850/1900
50Mbps
• Max Download Speed: 150Mbps
• Wi-Fi: IEEE802. 11b/g/n
• USB port: Type-C (Input)
• Battery Capacity: 3000mAh
• Power Input: DC 5V 1A
LED Indicator Type Status Remarks
On Ready for internet connection
Off No internet connection
Flashing Service connecting
On
The signal strength is shown by
strength LED indicator
Flashing Service Error
On
The battery capacity is shown by
strength LED indicator
Flashing Charging
Battery LED Indicator
Wi-Fi LED Indicator
Signal LED Indicator
Hong Kong uCloudlink Network Technology Limited
E-mail: [e-mail]
Hotline: [phone] or [phone] （China）
Facebook: GlocalMe
Instagram: @GlocalMeMoments
Twitter: @GlocalMeMoments
YouTube: GlocalMe
Address: SUITE 603, 6/F, LAWS COMMERCIAL PLAZA, 788
CHEUNG SHA WAN ROAD, KOWLOON, HONG KONG
Copyright © 2022 uCloudlink All Rights Reserved
V1.0
This product and related system are protected by one or more of
uCloudlink’s patents, details please refer to
https://www.ucloudlink.com/patents
Contact Us
1
2
3
4
5
Micro SIM Card
Warning
EU Regula
tory conformance
Specific Absorption R
ate (SAR) refers to the rate at which the
body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in
countries that set the limit averaged over 1 gram of tissue and 2.0
watts per kilogram in countries that set the limit averaged over
10 grams of tissue. During testing, the device are set to their
highest transmission levels in all tested frequency bands,
although the SAR is determined at the highest certified power
level, the actual SAR level of the device while operating can be
well below the maximum value.
The device complies with RF specifications and when used with
an accessory that contains no metal and that positions the
device a minimum of 0.5 cm from the body.
The SAR limit adopted is 2.0W/kg averaged over 10 grams of
tissue. The highest SAR value reported for the device when
properly worn on the body complies with the limit.
For body worn operation, the device complies with FCC RF
exposure guidelines and when used with an accessory that
contains no metal and that positions the device a minimum of
1.0 cm from the body.
The SAR limit adopted by the FCC is 1.6W/kg averaged over 1
gram of tissue. The highest SAR value reported for the device
when properly worn on the body complies with the limit.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause.
Undesired operation. Any changes or modifications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Regulatory conformance
Note:
This equipment has been tested and complies with
the limits for a class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
T
his equipment generat
es uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur
during installation. If the device does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is suggested to try to
correct the interfernce by the following measures:
--Reorient or relocate the receiving antenna.
--Increase the distance between the equipment and receiver
--Connect the equipment to an outlet on different circuit to the
receiver
--Consult the manufacturer or an experienced radio/TV
technician for help.
Inf
ormation on the disposal and recycling of the devices.
This symbol (with or without a solid bar) on the device, batteries
(if included), and/or the packaging, indicates that the device and
its electrical accessories (for example, a headset,adapter,or cable)
and batteries should not be disposed of as household garbage.
These items should not be disposed of as unsorted municipal
wasted and should be taken to a certified collection point for
recycling or proper disposal. For detailed information about
device or battery recycling, contact your local city office,
housedhold waste disposal service, or retail store.
Disposal of the device and batteries ( if included) is subject to
WEEE. Directive recast (Directive 2012/19/EU) and battery
dirctive (Directive 2006/66/ec). The purpose of separating WEEE
and batteries from other waste is to minimize the potential
environmental impacts and human health risk of any hazardous
subsatances that may be present.
EC
ERP
Ocean Trading GmbH
Anhalter Str.10, 10963, Berlin, Germany
[e-mail]
96 Kensington High Street W8 4SG, London
[e-mail]
UK
ERP
UCLOUDLINK UK LIMITED
Note:
Listed wireless data transfer rates are the theoretoical
maximum. The actual data transfer rate may vary depending
on the network environment and carrier
’s coverage.