User's Manual

ManualsBrandsGloblink Technology ManualsElectronicsWIRELESS PRESENTER

Quick Reference

1. Insert batteries.

2. Turn on your computer. (Presenter doesn’t compatible with IMAC system, only

compatible with IBM PC or compatible system.)

3. Plug the receiver to the computer’s USB port.

4. Turn the power switch to “on” of the presenter.

5. Press “Lock” key of the receiver.

6. The “Lock” LED will light off of the receiver.

7. Press “ID” key of the presenter.

8. The “Lock” LED will light on again of the receiver.

9. Now you can use the wireless presenter.

User’s Manual

Features and Specifications：

 RF presenter; Dimension: 120(L) x 51(W) x 46(H) mm

 RF receiver; Dimension: 68.7(L) x 23.7(W) x 14(H) mm

 Laser pointer

 Optical trackball mouse function、presentation function、multimedia function

 Error detection ability

 Total of 1024 sets and 8 channels

 Advanced power saving design when presenter stop working

 Power switch for on/off

 Microsoft Windows 98SE/ME/2000/XP compatible（Internet access hotkey、

email access hotkey and multimedia keys functions cannot use Windows 98SE

system）

 CE, FCC approval

Installation:

1. Battery installation: Push out the cover of the battery compartment to open it as

shown in fig. 1, then insert the alkaline batteries（AAA*2）that comes with the

product, ensuring that the polarities are correct. Close the cover of the battery

compartment.

Fig(1)

Battery insert

Battery Cover

ID Key

Summary of content (7 pages)

PAGE 1
Quick Reference 1. Insert batteries. 2. Turn on your computer. (Presenter doesn’t compatible with IMAC system, only compatible with IBM PC or compatible system.) 3. Plug the receiver to the computer’s USB port. 4. Turn the power switch to “on” of the presenter. 5. Press “Lock” key of the receiver. 6. The “Lock” LED will light off of the receiver. 7. Press “ID” key of the presenter. 8. The “Lock” LED will light on again of the receiver. 9. Now you can use the wireless presenter.
PAGE 2
. Connect the receiver that comes with the product to a USB port on the computer, the LED on the receiver lights to indicate that the PnP connection has been successful. 3. Setting the identification code: 3.1 Press the "Lock" key on the receiver once, as indicated in fig. 2, the LED lamp goes off . 3.2 Press the "ID" key on the presenter once, as indicated in fig. 1, the LED will light up to indicate that the setup has been completed, and the presenter is now working. 3.
PAGE 3
Operating environment: Positions of presenter and receiver may affect the RF transmission performance. 1. Avoid putting presenter and/or receiver on a metal desk. This may shorten transmission distance. Function introduction 1.
PAGE 4
(2) Presentation mode ＊ Button 1：page down ＊ Button 2：ESC ＊ Button 3：page up ＊ Button 4：Alt-Tab ＊ Button 5：Internet ＊ Button 6：Email ＊ Button 7：mode select ＊ Button 8：ID key ＊ Trackball：move cursor ＊ Power switch：power on/off ＊ Laser button：laser pointer ＊ Presentation mode lamp：presentation function Page up Trackball ESC Page down Mouse mode lamp Power switch Presentation mode lamp Alt-Tab Multimedia mode lamp Email Mode select Internet Laser button ID key
PAGE 5
(3) Multimedia mode ＊ Button 1：volume down ＊ Button 2：play/pause ＊ Button 3：volume up ＊ Button 4：Alt-Tab ＊ Button 5：Internet ＊ Button 6：Email ＊ Button 7：mode select ＊ Button 8：ID key ＊ Trackball：move cursor ＊ Power switch：power on/off ＊ Laser button：laser pointer ＊ Multimedia mode lamp：multimedia function Volume up Trackball Play/Pause Volume down Mouse mode lamp Power switch Presentation mode lamp Alt-Tab Multimedia mode lamp Email Mode select Internet Laser button ID key
PAGE 6
2. Receiver ＊ ID & Channel lock button：It make lock and unlock ID. ＊ ID & Channel lock lamp：It will be red lighting when the receiver is locked by lock button. Lock key LED Q&A： Q1：Presenter doesn’t work！ A：check batteries are inserted already or not, plug in the receiver to PC or not, check power switch is turn on or not, do the initialization process or not. Q2：Laser pointer doesn’t work ! A：check batteries are inserted already or not, check power switch is turn on or not.
PAGE 7
FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.