Glob link Technology tne, A wireless keyboard are different from keyboard with wire connection. Please read the installation instructions carefully, to get acquainted with wireless devices, (See picture for introduction of parts) Hardware Installation: 1. First, switch the compiler OFF and connect the receiver unit to the key honed P52 port. 2. Switch the computer (N, 3. Do sot connect or disconnect the keyboard receiver while the computer is in operation. It may damage the computer and for keyboard post.
Bobolink Technology tne. Operating instructions: Operation and trouble shooting: Ets stains 1. When should the channel be changed of keyboard, and how? If during normal operation the keyboard is subjected © interference, the channel should be changed. To do this, press the “Channel and “FI 1 “F6” key simultaneous of keyboard, while pointing the keyboard 1 the receiver, and wait shout five (5) seconds. The “data status” LED on red of the receiver will light 20d go out again. The change fs now completed.
Clink Technology Tne, 3. Pressing the “10” and “FI” "F167 1 “tg “6” kay simultaneously will change the 1D Fla Flo 106 \ Ll HEE BEE BEBOP O00 a Bumblebee O00 000m CCL EO LL LEE 000 ono 0 O00 The "leek” key of the back of the receiver need to ba pressed only, when you don’t vert to change channel snd YD. The “lock LED will light on any time.
Treblinka Technology Ine. 5, Point the keyboard to the receiver within a distance of 1 foot and press the “Channel”, “H0” avd “R” keys simultaneously. The keyboard will bs on default setting channel 1 and 10 1, R Channel \ } 0 Moog oog 000 Boohoo oon 0on | 000 005 0 Coo COC O000 000 £0 \ in Multi-media Key definition: rho AERIES HEEL + Hay 4 PEL 4G 15®@ [ZT] 22 |3 Eat ¥ Pauli Fae og ins fret 3} HU malt-dinned keyboard mare! 445 Dan
Bobolink Technology lic, All multi-media key will combined “Fu” key 0 A000 Ooo O00 060 CC | O00 CIOOOn000 sn 0° 8 Operating environment: The wireless keyboard have 1 functional operating distance of 6 feel To avoid interference, the mouse snd keyboard should not be operated on steel furniture or desks. * Recommendation; Best results will be achieved if the receiver is operated ing distance of about 15 cm fom the monitor.