Glob link Technology Ine. A wireless keyboard is different from keyboard with wire connection. Please read the installation instructions carefully, to get acquainted with wireless devices. Hardware Installation: 1. Switch the computer OFF and connect the receiver unit to PS/2 ports or computer. Connect Touch Pad connector (green color) first, then Keyboard connector (purple color). @ Note : Do not connect or disconnect the receiver unit while the computer is in. operation.
Glob link Technology Inc 3. Point the keyboard to the receiver within a distance of 1 feet and press any of following keys simultaneously. The “data status” LED will blink once. Now, the operation channel is set up. You can use the wireless keyboard now ! CH + Chl CH + Ch2 CH + Ch3 CH + Ch4 CH + Ch5 CH + Ché = CHANNEL 1 = CHANNEL 2 = CHANNEL 3 = CHANNEL 4 = CHANNEL § = CHANNEL 6 Data status 4. Point the keyboard to the receiver within a distance of 1 feet and press any of following keys simultaneously.
Glob link Technology Inc. Key definition: 1. Internet key Internet key E-mail OVERPRODUCE 3 \ Chanel 1 ~channel 6 Speculator My computer 2. Multimedia key Multimedia key >A Ji] Select O + power (Te O volume oy DD scroll Channel setting ID setting Operation and trouble shooting: 1. If during normal operation the keyboard is subjected to interference, the channel should be changed. To do this, just press the “CH” and “Chl” to “Ch6” keys simultaneously (please refer to above Hardware Installation 4.).
Glob link Technology Inc. 2. The “lock” key of the back of the receiver need to be pressed only, when you don’t want to change channel and ID. The “lock LED” will light on any time. Lock key oO Lock LED \ 3. How to do the initial setting. Release the “lock” key, the “lock LED* will light off. Press the “CH” , “ID” and “r” simultaneously.