2.
This compact and lightweight device features built-in hotkeys for Internet and Multimedia functions. Utilizing 2.4GHz RF wireless technology, it has working range 12 meters from the receiver. Enjoy the freedom to use the keyboard with optical trackball practically anywhere. Features - 2.
Package contents - Keyboard with optical trackball - USB receiver - 2 AAA Alkaline batteries - User’s manual Battery installation Open the cover of the battery compartment by sliding with a thumb. Insert two AAA size batteries, ensuring that the polarities are correct. Fig.
Caution Do not mix using alkaline batteries and rechargeable batteries at the same time to avoid the risk of batteries explosion. (i.e. do not combine an alkaline battery with a rechargeable battery) Establishing the communication link Connect the receiver to a USB port of the computer. LED light on the receiver will turn on automatically. Setup Button Fig. 2 LED light Press and release the Setup button on the receiver to turn off the LED light. (Fig.
Left Key Scroll Wheel Right Key Optical Trackball It features mouse left and right key, and 8 hotkeys to access Internet and Media Player directly.
Click the “Num Lock” key to activate numerical keypad function. Press the key again to return to letter input. Sleep Mode To save power consumption, this keyboard will enter into sleep mode automatically after two minutes left unused. LED light of the trackball will go off and mouse cursor will have no movement temporarily. Sleep mode of optical trackball does not affect input function of other standard keys. Press and release the trackball to wake up the sleep mode and to recover the trackball function.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.