GTCAM Quick Start Guide Thank you for purchasing GTCAM – The first web camera in the world with easiest way to setup base on Skype platform you’re using every day. Quick Start Guide Version 1.0.1 This document will be updated without any notice. © 2012 www.GlobalScaleTechnologies.
GTCAM Quick Start Guide 1. Introduction, Package List, System Requirement and Recommended User Distance 1.1 Introduction There are only 3 steps you need to install and use GTCAM: (1) Register one Skype account on PC for your GTCAM. (2) Connect GTCAM to PC via mini-USB cable, run setup program and enter your friends’ Skype account. (3) Login Skype on your PC or mobile phone with one of the friends’ account then call GTCAM. 1.
GTCAM Quick Start Guide 3. Installation of GTCAM Software 3.1 Go to “My computer” on your PC, there should be one extra disk drive appears on screen after connecting to GTCAM. 3.2 Double click the disk drive icon and you will see files as below. 3.3 Double click “Setup.exe”, you’ll see GTCAM Setup wizard. 3.4 Choose the destination folder you want to install then click “Install”. 3.5 Click “Finish” button to close the Setup window. 3.2/3.3 3.1 3.4-(1) 3.4-(2) 3.5 4. Configure your GTCAM on PC 4.
GTCAM Quick Start Guide Step 1 Step 2 Step 3-(2) Step 3-(1) Step 4: Locate Network GTCAM provides you two types of connection: Wi-Fi or Ethernet but only one at a time. ※ Connect to network via Wi-Fi Check on and press “Next” button. Click “Search” to find out all available wireless connection. Select the Wi-Fi AP name you want to connect then click “Next”. Input the password then click “Check“ to verify. Click “Ok” when you see “Connection ok”.
GTCAM Quick Start Guide ① ② ③ ⑥ ④ ⑧ This document will be updated without any notice. ⑦ ⑤ ⑨ © 2012 www.GlobalScaleTechnologies.
GTCAM Quick Start Guide ※ Connect Network via Ethernet Click to check and press “Next” button. Once connected, you will also system rebooting request as instructed in the Wi-Fi connection. 5. Run Skype and Add GTCAM as your Friend 5.1 Run Skype on your PC, login with one of the account stored in your friend list of GTCAM. 5.2 After login successfully you need to add GTCAM as one of your friend. Click on “Contacts” and select “New Contact…” from the pull-down menu. 5.
GTCAM Quick Start Guide 7. Video Recording 7-1. GTCAM will start recording the video automatically if micro-SD card is detected. Before take out the micro-SD card, you have to wait at least 5 minutes. You will not see the recording video if recording time is less than 5 minutes. 7-2. Video files will be recorded as multiple files with 5 minutes long each one, file size: 75MB in .avi format. (1GB size micro-SD card can save about 1 hour video.) 7-3.
GTCAM Quick Start Guide Copyright Notice © 2012 www.GlobalScaleTechnologies.com Trademarks GTCAM is a trademark of Globalscale Technologies, Inc. Skype is a trade mark of Skype or its related companies. This product/application has not been approved or endorsed by Skype, Skype Communications S.a.r.l. or any of their related companies. This product includes SkypeKit3.
Note: The device has to be kept a distance of 20mm from human body and its has no ad-hoc function. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this devic e may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.