User's Manual

ManualsBrandsGlobalscale Technologies ManualsElectronicsDREAMPLUG WIFI

Quick Start Guide – DreamPlug page 1 / 11

DreamPlug User Guide

Thank you for purchasing our DreamPlug – The Power to Innovate!

This is running at 2.4GHz yet using less than 10W power consumption. This little palm-sized powerhouse can handle all your

biggest tasks while still saving about 96% on energy costs when compared to the average 175 Watt desktop computer. You can

customize your Plug to work in almost any industry - Cloud ComputingˈHome / Industrial Automation, Security/Surveillance,

Medical Monitoring and Data Capture , High End Audio SystemsˈNetwork Storage and monitoring , VoIP and IPPBXˈSmart Grid

/Mesh . You can never have enough storage, not to mention fast access to all that data. That's why we have provided Wi-Fi,

Bluetooth, Gigabit Ethernet, USB 2.0 and eSATA connection options to the Server line of products. as the AUDIO INTERFACE,

the dreamplug can play the music or others data from this port to the external speaker or others devices.in a word, Go ahead

give us what you got, we can take it.

Package contents

DreamPlug Content List Remark

1 DreamPlug 1 unit

2 Detachable AC-DC Power Supply Unit 1 pc

3 Detachable DC-DC Power Cable 1 pc

4 Detachable AC Slider 1 pc

5 Detachable AC Power Cord Adaptor 1 pc

6 AC power Cord 1 pc

7 Protective Slide Cover for DreamPlug 1 pc

8 Protective Slide Cover for Power Supply Unit 1 pc

9 Ethernet Cable 1 pc

10 Warranty Card 1 pc

11 Quick Reference Guide 1 pc

12 External JTAG Debug Module No Optional item. Not included

Note 1: All files will be available download: https://www.globalscaletechnologies.com/t-downloads.aspx

Note 2: JTAG debug module is sold separately. It’s highly recommended for you to purchase this module to use in programming and debugging.

Note3: This device has been integrated with internal antenna, no external antenna is needed. for more details of the antenna ,please refer to the EUT

Photo in the test report.

A. FOR INITIAL USE

1. To be used as a Plug Computer:

GTI-2010.12.10

Summary of content (11 pages)

PAGE 1
Quick Start Guide – DreamPlug page 1 / 11 DreamPlug User Guide GTI-2010.12.10 Thank you for purchasing our DreamPlug – The Power to Innovate! This is running at 2.4GHz yet using less than 10W power consumption. This little palm-sized powerhouse can handle all your biggest tasks while still saving about 96% on energy costs when compared to the average 175 Watt desktop computer.
PAGE 2
Quick Start Guide – DreamPlug page 2 / 11 2. To Be Used as a “Desk Top” Computer.
PAGE 3
Quick Start Guide – DreamPlug page 3 / 11 3. To Have the “DreamPlug” Wall Mounted.
PAGE 4
Quick Start Guide – DreamPlug page 4 / 11 B. DreamPlug Server appearance and connecting ports 7 RJ45 Function 6 5 4 3 2 1 Remark:the RJ45 can not work when direct connect to the computer it need to connect through the router then work.
PAGE 5
Quick Start Guide – DreamPlug page 5 / 11 Ports description- DreamPlug Server C. LED indication 1 2 3 4 D.
PAGE 6
Quick Start Guide – DreamPlug page 6 / 11 E. Connect to JTAG board 2. Connect 8 pin JTAG cable 1. Connect 4 pin UART cable 3. Connect Mini USB cable here. The other end to computer’s USB port. This is the standard 20pin JTAG connector which has the same pin signals as 8 pin cable This DC 2.5V is for Dream Plug CPU e-fuse programming only, do not use it for other purpose. Normally, this switch (or jumper wire) should be on the left side for UART selection F.
PAGE 7
Quick Start Guide – DreamPlug page 7 / 11 1 File name Description Where to get it Minicom Used as Board console Re-Install command: yum install minicom note 1: Fedora9 has a built-in minicom 2. Ftdi_sio.ko FTDI device driver http://www.globalscaletechnologies.com/t-downloads.aspx module for Linux 3. Ftdi_sio.ko FTDI device driver http://www.globalscaletechnologies.com/t-downloads.aspx module for Linux 3.
PAGE 8
Quick Start Guide – DreamPlug page 8 / 11 SF: Detected MX25L3205D with page size 256, total 4 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: egiga0, egiga1 88E1121 Initialized on egiga0 88E1121 Initialized on egiga1 Hit any key to stop autoboot: 0 You can press any key to stop auto-boot when you see the boot delay timer is counting down.
PAGE 9
Quick Start Guide – DreamPlug page 9 / 11 The default mode is AP mode every time when it powers on and can be switched to client mode manually by entering the setup page, please follow the procedures below to set-up the functionalities for WIFi and Bluetooth. 1. Prepare a Bluetooth earphone and one computer installed with Wi-Fi Lan card, here we use computer with Windows XP operating system for example. 2. Go to “Network Connections” 3. Select “Wireless Network Connection” 4.
PAGE 10
Quick Start Guide – DreamPlug page 10 / 11 6. Choose one and click here to connect. 7. Connected 8. Open internet browser, enter address: 192.168.1.1, you will see the web page as below. This is the setup page for this DreamPlug Server, please follow the instruction and link on the page for configuration.
PAGE 11
Quick Start Guide – DreamPlug page 11 / 11 I. Download sites To download the files for Dreamuplug server, please visit: http://www.globalscaletechnologies.com/t-downloads.aspx Other useful resource links are: http://www.plugcomputer.org/ http://plugcomputer.org/plugwiki/index.php/GuruPlug the bluetooth and wifi module uses the same module,and the same antenna,when using the bluetooth,the wifi will not work and the same as the wifi,when using the wifi, the bluetooth will not work.