User's Guide
品 名 / Description
尺 寸 / Dimensions
材 質 / Material
印 刷 / Printing
加 工 / Process
525x 105mm
80g/m2 模造紙
黑白雙面印刷
4摺 (成型105x105mm)
版 本 / Version
日 期 / Date
備 註 / Note :
設 計 / Designer
T1
2019.10.24
Mandy Hsieh
PRINTING SPEICFICATION
This is a GENERIC ARTWORK intended for the purpose of providing necessary graphics.
The colors shown on this Artwork do NOT reflect the actual printing colors. Please see Aesthetic Specifications for color information.
料 號 / Part Number
N3PM1TR3500000
TR-350S 說明書
(MD4/ MD4L/ GP-300M/ GP-301M)
本材料不應該違反RoHS&WEEE裡指令的任何禁/限用物質
This part should not contain any substances which are Specified in RoHS&WEEE’s Directive.
Design Description
Designer
設計
DateECN
N/A
日期
設計描述
Version
版本
1
2
3
4
5
打樣圖面
供打樣與試產用途
核准 / Approved
Mandy Hsieh
1.4 Power 1.5 Device Operation
1.1 Buttons & LED Indicators 1.2 LED Indicators
1.3 Device Charging
Version 1.0
User Guide
10
8
7 6 5 4
3
1
9
2
1
2
Before First Use: Ensure a fully charged device upon receipt by
docking it in the charging cradle prior to use. It may take 3 hours
to ensure a full charge. The power icon will light-up in orange
when charging and the power icon will flash when fully charged.
Aer fully charging the device, based on standard sengs and
usage it should last 2 full days before requiring another charge.
Note: the device will automacally turn on when placed in the
charging cradle.
Cradle Input : 100V ~ 240Vac;Output : DC 5V/ 1.5A;
Dimension : 77.7 x 62 x 47.8 mm
Cellular LED
GPS LED
Wireless LED (Indooor posion status)
Power Status LED
1 SIM Card Tray
2 High-powered Speaker
3 SOS Buon
4 Cellular LED
5 GPS LED
6 Wireless LED
7 Power LED
8 Power buon
Turn On device by pressing and holding the power buon unl the
device vibrates (about 3 seconds).
Turn Off device by pressing and holding the power buon unl the
device vibrates (about 3 seconds.
When device powers down due to low baery, the device will vibrate
and make an audible series of beeps as it turns off.
Note: The power buon funconality may be disabled to prevent
accidental shut-down. Please contact your provider if you have any
quesons.
N3PM1TR3500000
9 Lanyard Holes
10 Charging Pins
LED (White) Status Descripon
Off Module is in sleep mode to preserve battery
device is attempting to acquire a GPS position
Flashing Quickly
(1 flash every second)
Flashing Slowly
(1 flash every 3 seconds)
device has successfully acquire a GPS position
LED (Blue) Status
Descripon
Descripon
Off Module is in sleep mode to preserve battery
Flashing
device is using indoor positioning to get location
LED Status
Off
(while off charger)
Solid Red
(while off charger)
Solid Orange
(while on charger)
Low Battery warning. Battery level is below 30%.
Place on cradle at earliest opportunity.
Battery level is between 30% and 100%.
Normal operating condition
device’s battery is being charged.
Flashing Orange
(while on charger)
Battery has been fully charged
Emergency (SOS) Button
2. Connect to the cellular network to send the SOS noficaon via
email, text message or both, and
3. Begin to call the SOS contact numbers set for the device (ask your
service provider for assistance as needed).
Note: the device may be sensive to distoron or feedback from
other nearby electronics such as mobile phones, car radios and other
electromagnec producing devices.
By default the device can only be called from any authorized phone
number. When the device is called, the device will ring and vibrate.
When a call is received, simply push the SOS buon and begin
speaking using the high powered speaker and microphone.
Note: How your device responds to an inbound call (ring / vibrate
and auto-answer) may be configured differently on your device.
Please contact your provider if you have any quesons.
Answering Calls
Ending Calls & Disabling the Hang-up Feature
While you’re on a call, you can hang up by pressing the SOS buon.
This will disconnect the call immediately.
Note: Your device may be configured to disable the hang-up feature.
In this case you will not be able to hang up and have to wait for the
other party to terminate the call. Please contact your provider if you
have any quesons.
In order to iniate an emergency or
SOS noficaon, press and hold the
SOS buon for 3 seconds or unl you
feel the device vibrate
(this is a default seng that can be
customized). At that point the device
will do the following:
1. Connect to the GPS network and
retrieve an updated locaon (if the
GPS network is not available, it may
use the last known locaon),
FCC
Federal Communicaons Commission (FCC) Statement
15.21
You are cauoned that changes or modificaons not expressly approved by the part responsible for compliance could
void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However,
there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful
interference to radio or television recepon, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separaon between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:
1) this device may not cause harmful interference and
2) this device must accept any interference received, including interference that may cause undesired operaon of
the device.
Tracker Contains FCC ID : UDV-201709
FCC RF Radiaon Exposure Statement:
1. This Transmier must not be co-located or operang in conjuncon with any other antenna or transmier.
2. During tesng, the tracker is set to their highest transmission levels and placed in posions that simulate use
against the head, with 5mm separaon, and on the body, with no separaon. When placing the tracker near your
face, keep at least 5mm of separaon to ensure exposure levels remain at or below the as-tested levels.
Cradle FCC ID : RID-CR4B
FCC RF Radiaon Exposure Statement:
1.This Transmier must not be co-located or operang in conjuncon with any other antenna or transmier.
2.This equipment complies with RF radiaon exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
ISED
Canadian Noce
This device contains licence-exempt transmier(s)/receiver(s) that comply with Innovaon, Science and Economic
Development Canada’s licence-exempt RSS(s). Operaon is subject to the following two condions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operaon of the device.
Avis Canadien
L’émeeur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovaon,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitaon est
autorisée aux deux condions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est suscepble d’en
compromere le fonconnement.
Tracker Contains IC : 23761-8PYA002
Cauon: Exposure to Radio Frequency Radiaon.
1. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be
co-located or operang in conjuncon with any other antenna or transmier.
2. During tesng, the tracker is set to their highest transmission levels and placed in posions that simulate use
against the head, with 5mm separaon, and on the body, with no separaon. When placing the tracker near your
face, keep at least 5mm of separaon to ensure exposure levels remain at or below the as-tested levels.
Aenon: exposion au rayonnement radiofréquence.
1. Pour se conformer aux exigences de conformité RF canadienne l'exposion, cet appareil et son antenne ne
doivent pas être co-localisés ou fonconnant en conjoncon avec une autre antenne ou transmeeur.
2. Durant les tests, les radios de l’ Tracker sont réglées sur le niveau de transmission maximal et sont placées dans
des posions simulant une ulisaon contre la tête, avec une séparaon de 5 mm, et au corps, sans séparaon.
Lorsque vous approchez votre Tracker du visage, gardez une séparaon d’au moins 5 mm pour veiller à ce que les
niveaux d’exposion ne dépassent pas les niveaux testés.
Cradle IC : 5442A-CR4B
Cauon: Exposure to Radio Frequency Radiaon.
1. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be
co-located or operang in conjuncon with any other antenna or transmier.
2. To comply with RSS 102 RF exposure compliance requirements, a separaon distance of at least 20 cm must be
maintained between the antenna of this device and all persons.
Aenon: exposion au rayonnement radiofréquence.
1. Pour se conformer aux exigences de conformité RF canadienne l'exposion, cet appareil et son antenne ne
doivent pas être co-localisés ou fonconnant en conjoncon avec une autre antenne ou transmeeur.
2. Pour se conformer aux exigences de conformité CNR 102 RF exposion, une distance de séparaon d'au moins 20
cm doit être maintenue entre l'antenne de cet appareil et toutes les personnes.
Note. It has no connecon between a device and a cradle. When a device is placed in a cradle, it will enable indoor
posion and charging funcon, however the cradle won’t send any message.
LED (Green) Status
Steady Light
Flashing Quick
(1 flash per second)
Flashing Slowly
(1 flash every 3 seconds)
Module is in sleep mode to preserver battery
device is searching for cellular network OR
device is on voice call.
device is sending data OR is registering on LTE network
device has acquired a 3G network
Descripon
Off
MD4/ MD4L/ GP-300M/ GP-301M
Mobile Defender™ Model
525mm
525mm
105mm
105mm
Note. The Tracker supports with 3G and LTE network