BTH-820, BTA-830 user manual page 1 Bluetooth Stereo Headset & Stereo Audio Gateway User manual, version 1.0 Copyright © 2005 GlobalSat Technology Corporation. All rights reserved The trademarks mentioned in this document are legally registered to their respective companies.
BTH-820, BTA-830 user manual page 2 Table of Content Introduction .......................................................................................................3 Features .............................................................................................................3 Specification ......................................................................................................5 BTH-820 button function..............................................................................
BTH-820, BTA-830 user manual page 3 Introduction BTH-820 Bluetooth Stereo Headset provides you the CD quality stereo sound. If a call is coming while you are listening to the music, just press any button to receive the call. Meanwhile, the music will stop automatically, and then resume itself after you hang up the phone. BTA-830 Bluetooth Stereo Audio Gateway enables your audio device to have the ability of wireless Bluetooth transmission.
BTH-820, BTA-830 user manual page 4 Power button USB power connector Earphone jack USB power connector Hold key Built-in Microphone Power button
BTH-820, BTA-830 user manual page 5 Specification Model Name BTH-820 BTA-830 Bluetooth Stereo Headset Stereo Audio Gateway Color Blue / Orange Blue / Orange Certification FCC, CE, BQB FCC, CE Product Description Bluetooth Version Bluetooth v1.2 Specification RF Output Power Class 2 Frequency Band 2.4GHz ~ 2.
BTH-820, BTA-830 user manual page 6 BTH-820 button function Button Incoming call is While on the phone ringing Remark 1 While playing the music While playing the with Bluetooth Dongle music with BTA-830 (AVRCP, A2DP profile).
BTH-820, BTA-830 user manual page 7 Turn on and off, pairing and charging the device BTH-820 Turn on: Turn off: Pairing: BTA-830 Press the power button for 2 seconds until the Press the power button for 2 seconds until the blue LED is on. green(or blue) LED is on. Press the power button for 4 seconds until the Press the power button for 2 seconds until the red LED is on. red LED is on.
BTH-820, BTA-830 user manual page 8 Troubleshooting Check the battery power. Make sure the devices are turned on. Make sure the devices have been paired. Make sure the devices are within the 10 meters range. Check the volume. Check if the audio resource is correctly input. Pair the devices over again. Can not connect with cell phone : Delete the BTH-820 device in your cell phone, re-start it and do the pairing again. Can not turn on the device : Do a Reset.
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.