User's Manual

ManualsBrandsGlobal Tech China ManualsCamera & PhotoI Digital / 2.4G RF PanTilt Camera (Transmitter)

I Digital Pan and Tilt Camera System Instruction manual

Product Features

2.4G Digital Wireless Image Communication

2 Way Wireless Sound Communication

Volume Adjustable at Receiver

System can expand to 4 cameras, including Door Camera

Wireless Digital Zoom Function on Camera

Wireless Pan and Tilt Function on Camera

Built-in PIR Motion Sensor on Camera

LEDs on Camera to Allow Night Viewing

Receiver and Camera powered by 9.5V adaptor

Completed Kit contents

1 x 2.4G Wireless Receiver with 1GB SD card and SCART connection to TV

1 x 2.4G Wireless Pan/Tilt Camera

2 x Fixing kits and 1 x instruction manual

2 x 9.5V 500mA BS adaptor

Optional Accessories

Additional Pan and Tilt Cameras

Additional Door Camera

Tools required:

Small cross head screw driver

T-10 Star screw driver

Number 6 masonry drill bit

A large masonry drill bit (for the Door Entry Camera)

Hammer drill

Small hammer

Pencil, ruler and spirit level

Important: before you install the I Digital Wireless System please take these things into consideration.

Position the receiver close to a 13 Amp socket, for the plug-in adapter

Keep the camera and receiver out of reach of small children.

Choose a position for the receiver, so you can have a clear run with all the power cable.

Summary of content (8 pages)

PAGE 1
I Digital Pan and Tilt Camera System Instruction manual Product Features 2.4G Digital Wireless Image Communication 2 Way Wireless Sound Communication Volume Adjustable at Receiver System can expand to 4 cameras, including Door Camera Wireless Digital Zoom Function on Camera Wireless Pan and Tilt Function on Camera Built-in PIR Motion Sensor on Camera LEDs on Camera to Allow Night Viewing Receiver and Camera powered by 9.5V adaptor Completed Kit contents 1 x 2.
PAGE 2
How to install the Receiver Place the Receiver close to a power socket. Connect the RCA Plugs to the RCA sockets on a TV.The connectors are color coded, so please make sure the cable connections match on both ends. Insert the adaptor jack plug to the socket on the Receiver. How to install the Camera: 1. Planning your system layout Try not to position the camera so that it is facing directly at the sun as this will affect the picture quality. Remember the changing positions of the sun during the year.
PAGE 3
1. Mode Button SD Card Inserted: In View mode, press the Mode button once to change to Playback mode or press the MODE button and hold for 3 seconds to change to Setup mode. In either case, press once again to change back to View mode No SD Card Inserted: In View mode, press the Mode button once to change to Setup mode, press once again to change back to View mode 2. Cam In View mode, this selects the camera to view 3. Up In View mode, this button is tilt-up button.
PAGE 4
Receiver Unit Operation Connect the Receiver unit to TV. When you first power up the Receiver unit, this will show the IS DIGITAL Logo on the screen and then go directly to view mode. In View mode, press the Cam Select Button to select the camera you wish to view. You will then see the image viewed by that camera together with various function icons as below.
PAGE 5
In view mode, please press and hold the mode key for 3 seconds and this will take you into the Setup Mode. You will see the Setup Menu as above. How to select a function from the Setup Menu Press the up, down, left, right and ok buttons to select the appropriate function menu.
PAGE 6
3. Record Time - Press the OK key to enter the Record Time sub menu.
PAGE 7
Audio Adjust – This adjusts both the Receiver and Camera Audio Settings Audio Volume - Press left/right key to choose between 0 to 10 volume level at the Receiver (Default is level 5) TX SPK Volume - Press left/right key to choose between 0 to 10 volume level at the Camera (Default is level 5) Two Way Audio - Press left/right key to select two way sound communication. (Default is On).
PAGE 8
Time Lapse Mode only). Press the OK key to enter the picture or video file directory. Date of Recording –Press Up/Down key to select the date of the file folder record you want to see. Press the OK key to select. The last item in each file is the lastest recording on that date saved on the SD card. Record file name - You can also select which file you want to see by “recording time”. Press Up/Down key to select the time record file and OK to select.