User Manual

ManualsBrandsGlobal Target ManualsElectronicsBluetooth iPod Dongle

iTooth 1

11/17/2008

iTooth USER MANUAL

iTooth, a Bluetooth audio Transmitter for iPod, is friendly works with most of Bluetooth audio

receivers such as Bluetooth Stereo Headset, Bluetooth Stereo Headphone, Bluetooth Speakers or a

speaker with a Bluetooth audio dongle connected which support Bluetooth A2DP (Advanced Audio

Distribution Profile) Dual Air™ stream and dual AVRCP (Audio Remote Control Profile)

simultaneously. It connects with most iPod series via the iPod dock connector. Easy to carry and

no extra charging method is requested. Fully in-build password interoperability supports most of

the popular Bluetooth pin codes which be widely used in the market.

1 Introduction

1.1 Features

a. Support Bluetooth A2DP and AVRCP Dual Air™ stream simultaneously

b. Full Pin Codes Support

c. Auto Pair and Auto Connect

d. Installation Free

e. Compatible with All Generation of iPod Series

f. Ultra Low Power Consumption

1.2

Installation

1.3 Product Specification

Bluetooth Specification Bluetooth v2.0

Bluetooth Profiles A2DP, AVRCP

Frequency Band 2.4GHz~2.4835GHz ISM Band

Working Distance Class 2, Up to 10 meters

Support Pin Code 0000, 1234, 8888, 9999, 4444, 1111

Dimension 21 x 28 x 6.5 mm

Weight 4.5g

Packing Contents

1. Bluetooth iPod Dongle

2. User Manual

Summary of content (4 pages)

PAGE 1
iTooth USER MANUAL iTooth, a Bluetooth audio Transmitter for iPod, is friendly works with most of Bluetooth audio receivers such as Bluetooth Stereo Headset, Bluetooth Stereo Headphone, Bluetooth Speakers or a speaker with a Bluetooth audio dongle connected which support Bluetooth A2DP (Advanced Audio Distribution Profile) Dual Air™ stream and dual AVRCP (Audio Remote Control Profile) simultaneously. It connects with most iPod series via the iPod dock connector. no extra charging method is requested.
PAGE 2
1.4 2 3 Product Outlook： Indications： Blue（B） 2.1 Pairing ：（B）Blink rapidly 2.2 Stand by ：（B）Blink once per 5 seconds 2.3 Streaming ：（B）Breathy indication Prepare to use the product 3.1 Turn On: Connect iTooth to iPod via iPod connector underneath, click the button on the iTooth and blue indication will start blinking. 3.2 Turn Off: iTooth will be power-off whenever iPod been turned off. 3.
PAGE 3
4 Connect to stored Bluetooth receiver(s) 4.1 iTooth will automatically scan and connect to store Bluetooth devices after power on. If no stored device was found, it will enter to the pairing mode. (Blue indicator begins to blink rapidly) 4.2 iTooth will automatically search for the last played device and to establish the second connection. If no stored device be found within 1 min, it will enter the standby mode automatically. 4.
PAGE 4
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.